@@PeterSripolI've had this fan belt idea since 2021, I just haven't made one yet. I remember thinking in my mind about having a ceiling fan, as a belt with fins that travels across the wall of a room. I might make one someday, who knows.
Printing the blades standing up was likely a large part of the fragility issue. Laying them down would create significantly stronger parts, though it would probably require some support material.
@@CarbonRobloxide Infill is most useful as inner support for structure/overhang rather than strength. Wall count (perimeters) contributes much more to part strength than infill.
The flying radiator's part of the problem was its wheel configuration. two of them directly underneath the wings. Maybe if you open up the "triangle" between them a bit, you could achieve a more stable takeoff and avoid the still pivot thing
For the tank tread propeller, you may be able to prevent the tips of the blades colliding by implementing a continuous curvature guide plate for the "treads" to ride on. Right now you are going from linear motion to rotary motion with no ramp up/down in speed, which is causing the blades to bunch up at the intersection where the treads overshoot coming off the drive sprocket.
@@2degucitas What I'm trying to explain is about the original shape with sprockets and flats. Kind of like how all squares are rectangles but all rectangles are not squares. A circle is a continuous curvature, but not all continuous curvatures are circles. Its hard to explain in words, so here is a diagram that shows the difference between a CC corner and a true radius corner (which the track design is) forum.affinity.serif.com/uploads/monthly_2018_02/1*PIHFvGyy5sWK_d0MX_PhMw.thumb.png.6f41e201524397b574e3a005b6f96da5.png (Or simply google continuous curvature corner if you dont want to click random links)
Loved the flying box fan! Suggestion: Extreeeeeeeeeeeeeeeeme aspect ratio wings with wingtip props. Like wings so wide you have to have steel wire supports Maybe print the blades horizontally not vertically?
I recently saw a video, can’t remember who by, where he tested 3d printed bolt strength and printing them horizontally averaged nearly twice as strong across sheer, pull, and torque tests. Need to print with supports, but the extra strength is worth it in this case
Yeah, the bamboo labs are great, but alot of their standard profiles are very high speed and layer addhesion strength suffer as a result. But in general parts are usually much stronger horizontally as mentoned.
I think the tank tread propellers have merit; just have them on a circular track. Then you essentially have a prop that rotates around a circle, rather than an axle. You could then have propellors wrapping around the hull!
Or at least an elliptical track. I think there's a problem when the blades come out of the turn and have to decelerate quickly, causing them to bump into each other.
There are so many better ways to achieve driven rotational motion around a hollow shaft. I hate when people online randomly claim that a mechanism would produce too much friction, but in this case I'll bite the bullet and say a tank tread would definitely cause too much friction for it to be worth any practical use, especially in flight where power efficiency is so important.
But that was not point of that idea. If you rotate them in circle it will just look like nomal propeller round movement.... Wierdness of his plane was non circular movement)
I could see it on a double hulled plane so that you only need one motor and don't have to run a second motor in the reverse direction. He does have to do something about the track flex in the straight sections.
The collisions on the tank track prop blades was from the blades being violently taken from a circular to a linear motion. They wanted to go round and pitched forward while the next blade was already on the straight path forward and the tips collided. If you put some suppord rail under the tank track to avoid the track from bending in after the wheel it would reduce the problem and help with blade longevity :)
don't forget the pull on the " flexible " track. they don't move just in the axis of the track but they move but also move forwards and backwards. hence the massive loss in propulsion.
For the caterpillar tred plane you could have just put the blades around a big circle. That way there would be less blades bumping into each other, and you would obtain a more constant thrust as well.
I had always wondered at how that design would be stable, and how much lift it would get. Could you imaging if that were to come in for a strafing run? Some dude on an mg just spraying at it not being able to tell where to hit that mattered, lol
Hey Peter! I think the tread props could be lighter if made with a single printed piece, but you need to print it horizontally so that the layer adhesion isn’t the breaking point.
Multi wing plane was actually quite interesting. I mean, it kept falling over with those wheels, but it looked super cool, and once it was in the air it looked both odd and awesome.
I think doing a tank tread propeller across the wings would be interesting (kinda like the idea of a lot of micro-propellers to get consistent thrust across the entire wing, but using a tank tread design instead). Maybe even having the propeller go inside the wing during the corners to try and prevent excess thrust at the wing tips (assuming that matters).
Actually, having that thrust at the wingtips can increase lift, if the prop blades are moving downwards at the wingtips: the vortex from the propwash neutralizes some of the tip vortex from the wing
I’d love to see more refinement of the tank tread prop. Even if you made it a circle, to get more radially symmetrical thrust, I still think it’d be neat, to go around the outside of a fuselage
You just do it at the end of the fuselage and it's called boundary layer ingestion. It's great for efficiency. edit: 2 large propeller blades will be most efficient.
I think the biggest barrier is the lack of guides. The belts were constantly bending inwards between the gears, as is natural for a high speed belt without extreme tension. You can see the belt bending inward and the props hitting eachother at the tips, even at fairly low speed. Just putting a block of wood between the gears for the belts to slide over would likely fix the problem. Hollow out said block and put bearings on both sides so the belt can slide across with less friction, if you want to make it well.
@@AngryAlfonse I think the blade pitch is also an issue. Normal propellers 'twist' so that the forces all along the blade are even. The slower moving part near the hub takes a bigger bite of air, the faster moving part near the tip takes a smaller bite, but with the speed difference they're experiencing the same amount of force (on a good prop). With the tread system, to have the same even force all along the blade you'd need to somehow have every blade 'straight' on the flat portions and 'twisted' on the curved portions of the track.
@@AngryAlfonse Yeah this was my thoughts too. Needs to be tensioned (there was some noticeable slack on a few of those before he turned them on), and guides if tensioning isn't possible/isn't doing enough.
The clip of the 20 stac bluetooth kite taking off has to be one of my top favorite PeterSripol moments, I keep coming back to watch. The beautiful quote, "Just gonna go for it", the sound of the propellers as it violently jerked around and gained altitude, and everyone's excitement and disbelief that it is working. Absolutely perfect moment
The tread propellor firing blades in all directions as it slowly sank made me genuinely laugh out loud! Now put the tread propellor around the outside of the 20-stack wing - perfectly even thrust :)
Would be interesting to see a plane propelled by a track running the length of the fuselage with either scoops or flaps to propel it. Maybe the half of the tracks that moves noseward could go inside the body to reduce drag?
wouldn't work. the simple fact that you would be pushing air in both directions even if you hid half of it in the body. you cant run the scoops though a force field vacuum.
@petersripol I used to watch you as a child, back when you averaged under 30k views. It made my day rediscovering your channel and to see the tremendous growth! Congrats to your success, hard work, and dedication! 🎉🎉
An idea: Do the multi wing plane and use the tank prip system with the oval going up and down. Since the multi wing plane doesn't need too much thrust then it would be interesting to see how it would work
For the tank propeller, blade strength is affected by print layer orientation. Also, some kind of tensioner probably would help mitigate blade collision.
what if you put four multiwing planes together to make a wing box and put the props in the center to make a flying box. I think that would be funny lol
7:00 Just imagine if you will with me that you were a pilot in that position and you see the BLADES OF YOUR PROP come flying off. You could count the individual blades and know as the next blade cycles around to the under gear and you know that one will be violently ejected from your plan mid flight.
That multi wing had too man wings. It was entertaining. I especially liked the way it flew so slow. Is there anyway you can do a "Slowest airplane we could build". Something like that would be really interesting also.
The prop is a cool idea, I think to execute it with any amount of success though you'd need it to vary its pitch on the straights to match the force being outputted by the ends... might even help with the blades flinging off
In all fairness, the original Phillips had a higher thrust line (though not good engineering). It folded one set of wings upward on its first test flight, did it not?
yeah my first thought was, "hang on why don't you put your fuselage actually through your center of lift" exaggerate the tailwheel plane aspect basically, run the spar from the center of the blinds and tilt back the plane as much as necessary to get the back wheel to touch the ground on takeoff. if it's sitting at 45° so be it, get enough velocity to fly the tail and you'll take off fine (my second thought was, ailerons, since roll seemed like a significant issue)
I think they collide due to high angular acceleration as they go from a curved path to a straight one. I think he should make the path more egg shaped to minimize the acceleration felt by the blades.
I think you’ll see more success with the track propeller if you place track sliders (supports) between the drive wheels on the top and bottom. This way the track won’t be able to dive as it leaves the wheels (which seems causing the propeller tip collisions). Whether the propellers are rigid/strong enough to withstand the tip deacceleration remains to be seen 🔎
Tank thread propeller was pretty interesting, would really like seeing a bigger version of it spanning the whole wingspan of the plane and some bigger roller wheels so the velocity change is not as abrupt
I've always wanted to build a tank-tread paddle wheel drive for a watercraft. I imagine the blades dropping flat on the forward direction, then popping open when they enter the water. This could theoretically even work if the system was fully submerged. Idk if you've done boats, but very much enjoy your aircraft vids. Keep it up:)😊
Probably my favourite videos of yours of recent times, just hilarious. I especially loved how even though the tread props were clearly so sketchy with blades shooting off left and right, once you were outdoors safety glasses were optional 😂
I think the main 2 issues you’re running into with the track props is 1. You have collision between your propellors, because your track isn’t guided enough. You could create a sort of moat on the inside of the track to guide it better. 2. Your propellors keep breaking off due to the centrifugal forces, you you might want to machine them in something stronger, like a light metal to make this work better, and machine them all in 1 piece with each tread link for less chance of parts just falling apart.
I wonder if printing them on their sides would help. I noticed the printing was done so the layers were not aligned with the direction of the force. This probably makes the surface smoother, but weaker
That was so much fun. More please! I'd like to see a long caterpillar plane with 6 or more flapping wings. For 3D printed props, adding a channel for some strong thread and CA allows you to print vertically (the nice way) and then add the needed strength. A bit more sanding needed, but it can work well.
Respect for your perseverance and patience Peter, I think you should build a Coléoptèr, it was a French prototype tail sitter vtol, as far as I know nobody has made an RC replica yet, but it would be really far out. also I think we definitely need an ekranoplan revisit, maybe one of those wacky mega GEV's the soviets wanted to launch spacecraft from. keep making the inspiring videos.
Great vid as always! I think the tank propeller can use some inner guides to dampen the violent inner turning on the edges as the blades seems to hit eachother a lot around where the round elements end. The stacked plane is simply amazing, do you think you can make one that has a fuelselage that looks like a sailed ship? I can totally see the stack acting like some eco-punk flying sail for something like that.
Yea, the tank propeller definitely needs runners or bogey wheels to keep the tracks straight between the wheels. Like you said, the blades kept contacting, and I’m certain that’s the main reason they kept failing and breaking. It’s a really funky concept; I think a quad engine plane with the tank propellers linking the two engines on each side would look awesome.
Tank tread is super cool. I was thinking a guide rail under the track right after the wheels might stop the rotational momentum. I'm not sure if it would alleviate the stress at the base of the blades or cause more. The blades wouldn't hit at least. Thanks for sharing and I love the shirts!
Man, this was insanely fun to watch! Your crazy experiments had me on the edge of my seat. Keep up the wild ideas, can't wait to see more wacky airplane stunts!
Much like you I've 3D printed plenty of parts just to see if they even work work or are somehow better. So for every one of your failures, know that I truly understand how you feel. But when it just works, that's the best feeling ever
I want to see how you cound push the tread-prop idea with optimization for different fuselage cross-sections. Could you integrate an ellipsoidal prop-track into the surface of the fuselage or a nacelle?
I think that the blades on the tank track propellers keep falling off due to crashing into each other. On the straight portions only a small amount of give is needed to make them collide. A simple fix would be to just make them better spaced out. Though making it stronger works too. Either way its kind of a doomed concept from the start but fun to watch it work!
It appears to me that the props are colliding with each other specifically where the relative angles change between the props (on the turns). I think either shorter props or larger gaps between them might help. But you probably already figured that out.
You need considerable space between wings to get efficient lift. Too much turbulence. One quadriplane in WWI, but triplanes seemed to be the reasonable limit. Some special use biplanes still exist. Check out Staggerwing and Griffon Lionheart for true beauty.
The Sopwith Triplane was designed to overcome the poor visibility of its predecessor, the Sopwith Pup, by reducing the chord (front to back dimensions) of the wings while maintaining the same lift, and it worked out. I believe the same would hold true for wingspan. You’d get less efficient gliding, but faster roll rate. IIRC, the minimum space between wings for efficient lift is the same as the chord (measurement from front to back) of the wings (or, if the wings you’re spacing don’t have the same chord, then the spacing is the average of the two chords). Also, IIRC, staggering the wings lowers the required spacing distance; not sure what the formula for that was, though.
i used to love making paper planes, and trying to get my balloon and ornithopter designs to work. these silly ideas really wanna make me get into aircraft again :D
I love love love the multi-wing plane!! I really like the way it flies in the wind. Something about it gives very steampunk-machine-impracticality vibes. Please do it on a large scale, it would also be super cool if the fuselage was really tall with floors and floors of little boeing windows, or maybe even have several ones stacked!
9-11 twin towers would have survived when those planes had springs like that 0:50 so they should make it mandatory for every commercial airplane from now on
That multiple winged plane is a must do on a bigger scale! That was amazing to see it actually functioning like a helicopter basically but still crazy controller. Honestly maybe a rework of the design so it's not as wobbly on take off lol😂 but excellent job! Surpassed my hypothesis on it so I'd love to see more! I see this being a really fun one to fly around especially after a little rework of the design it's gonna be kinda next level!😂
@@marasmusine right exactly thats why I'm kinda curious an excited to see them try to rework some of the design an get it's just a but more stable maybe even put a dummy on it that scales from about roughly 150 to 200 pounds person. Cause ot almost seemed to need something riding on it to help with the weight distribution
that track blade thing was wild i did not think it had any chance of working. if you find the time i think trying the track blade in a round config with shorter higher pitch blades would make some impressive results, be pretty cool to see anyway.
I got a better idea, why not just do 4 of them in a smaller radius of wheel! (lol your engineering mind is getting the best of ya you’re trying to improve a design that’s already ridiculous, it’ll only lead ya to the modern prop!)
Support material becomes an issue then. It can work, but it adds a lot of time and won't allow as many blades per print. My solution was to use strong thread and superglue.
At 3:45 - "stock" footage while holding a "pistol brace" killed me, hahahaha!!!!!! Very good one guys! This is what I love about this channel, the love for freedom and the 2A :)
That tank propeller idea is interesting - but next I think you need to make the weird propeller-flying-saucer thing from the first Incredibles movie.
that sounds like fun! maybe a counter spinning blade inside of it or maybe even a flywheel to counter act the out track would be interesting
Agreed! I think this tech has more use in drones than in planes, something more akin to a quadcopter
@@1RAH Yeah I think you would need two rows of external contra-spinning track blades. Either way a fun idea
You think too much
You could also do like a circle plane with the blades rotating around the wing of the plane.
I think this would be a great new series, taking weird ideas from the past and seeing if you can make them fly
A Stipa-Caproni airplane!
@@teresatran7967that is coming soon-ish
Yea!!! Like some of the odd DaVinci Planes and Copters!!
@@PeterSripolI've had this fan belt idea since 2021, I just haven't made one yet. I remember thinking in my mind about having a ceiling fan, as a belt with fins that travels across the wall of a room. I might make one someday, who knows.
@@PeterSripolFly a car radiator.
Printing the blades standing up was likely a large part of the fragility issue. Laying them down would create significantly stronger parts, though it would probably require some support material.
Also turning the infill up on the print settings (infill is how much plastic is inside the print)
I'm pretty sure Peter already knows that
@@CarbonRobloxide Infill is most useful as inner support for structure/overhang rather than strength. Wall count (perimeters) contributes much more to part strength than infill.
@@MarkGhebrial probably but you never know when a simple solution can evade you, peter probably also appreciates the comment for the suggestion.
@@FrandChaiyeah. If not for the suggestion then for the algorithm. There’s a lot worse comments people could choose to leave
The flying radiator's part of the problem was its wheel configuration. two of them directly underneath the wings.
Maybe if you open up the "triangle" between them a bit, you could achieve a more stable takeoff and avoid the still pivot thing
Yeah, bring those wheels out near the edge of the bottom wing and extend the rear wheel back a little bit
For the tank tread propeller, you may be able to prevent the tips of the blades colliding by implementing a continuous curvature guide plate for the "treads" to ride on. Right now you are going from linear motion to rotary motion with no ramp up/down in speed, which is causing the blades to bunch up at the intersection where the treads overshoot coming off the drive sprocket.
You mean make the track a circle?
@@2degucitas Probably thinking more like an oval.
also a tension wheel would help a lot.
Make it tank track shaped they are shaped like that for a reason😂
@@2degucitas What I'm trying to explain is about the original shape with sprockets and flats. Kind of like how all squares are rectangles but all rectangles are not squares. A circle is a continuous curvature, but not all continuous curvatures are circles. Its hard to explain in words, so here is a diagram that shows the difference between a CC corner and a true radius corner (which the track design is) forum.affinity.serif.com/uploads/monthly_2018_02/1*PIHFvGyy5sWK_d0MX_PhMw.thumb.png.6f41e201524397b574e3a005b6f96da5.png (Or simply google continuous curvature corner if you dont want to click random links)
I'm impressed just how persistent Peter is... Everything is ahowing him that it won't work, but he knows he can make it work. Mad props lad
Haha, mad props... how ironic
@@mc-dev so glad this was ur comment I was thinking the same thing 🤣
@@mc-dev ahhhh that got me good cheers
Yeah, he never gives up on these crazy ideas until he has at least some success. That's what makes it so fun!
Actually, no. It's saying that it doesn't work as is but is viable. Fix the design.
Making old failed flying experiments actually work is such a cool thing to do!
I wanna try making either a bullwhip or cheap rocket fuel with stump remover for toys
Bullwhip with paracord and bbs inside sounds like a good, easy, but relaxing and time consuming project
Neighbor: “There’s a window shade floating outside my house.”
Another fun video. Thanks for sharing, guys.
Loved the flying box fan!
Suggestion: Extreeeeeeeeeeeeeeeeme aspect ratio wings with wingtip props. Like wings so wide you have to have steel wire supports
Maybe print the blades horizontally not vertically?
I recently saw a video, can’t remember who by, where he tested 3d printed bolt strength and printing them horizontally averaged nearly twice as strong across sheer, pull, and torque tests. Need to print with supports, but the extra strength is worth it in this case
Yeah, the bamboo labs are great, but alot of their standard profiles are very high speed and layer addhesion strength suffer as a result. But in general parts are usually much stronger horizontally as mentoned.
I'd like to see it go all out for flying box fan. Large center mounted prop with Lasko across it.
I think the tank tread propellers have merit; just have them on a circular track. Then you essentially have a prop that rotates around a circle, rather than an axle. You could then have propellors wrapping around the hull!
Or at least an elliptical track. I think there's a problem when the blades come out of the turn and have to decelerate quickly, causing them to bump into each other.
There are so many better ways to achieve driven rotational motion around a hollow shaft. I hate when people online randomly claim that a mechanism would produce too much friction, but in this case I'll bite the bullet and say a tank tread would definitely cause too much friction for it to be worth any practical use, especially in flight where power efficiency is so important.
But that was not point of that idea. If you rotate them in circle it will just look like nomal propeller round movement.... Wierdness of his plane was non circular movement)
I could see it on a double hulled plane so that you only need one motor and don't have to run a second motor in the reverse direction. He does have to do something about the track flex in the straight sections.
Then you could just use a hollow shaft
The collisions on the tank track prop blades was from the blades being violently taken from a circular to a linear motion. They wanted to go round and pitched forward while the next blade was already on the straight path forward and the tips collided. If you put some suppord rail under the tank track to avoid the track from bending in after the wheel it would reduce the problem and help with blade longevity :)
THIS! I was so mad they didn't address this!
@@SenorBagel2552same!!
It needs an elliptical path to follow. That will give a better transition from rotating to straight.
Yep.
Offset each second one front/back
don't forget the pull on the " flexible " track. they don't move just in the axis of the track but they move but also move forwards and backwards. hence the massive loss in propulsion.
For the caterpillar tred plane you could have just put the blades around a big circle. That way there would be less blades bumping into each other, and you would obtain a more constant thrust as well.
I was shocked that the flying blinds worked so well! It was surprisingly stable in ways i hadn't predicted at all lol
*Venetian plane
stable thanks to gyro stabilization I'm sure. much like an F-117 , so unstable, no human can fly it without sas autopilot keeping it level.
@@williamedstrom5681*Flying blinds
Agreed
Getting that multi-wing plane to fly like that was an absolute thing of beauty! I loved it!
I had always wondered at how that design would be stable, and how much lift it would get. Could you imaging if that were to come in for a strafing run? Some dude on an mg just spraying at it not being able to tell where to hit that mattered, lol
correct me if im wrong but could you just make the tail alot longer and heavier so the center of mass was more on the middle bit
It has too much lift lol
In a good way
Hey Peter! I think the tread props could be lighter if made with a single printed piece, but you need to print it horizontally so that the layer adhesion isn’t the breaking point.
🤣I haven't had that good a laugh in ages. The self-disassembling-propeller... prop-crop-duster?
Multi wing plane was actually quite interesting. I mean, it kept falling over with those wheels, but it looked super cool, and once it was in the air it looked both odd and awesome.
The fact that it was hovering and flying backwards was impressive.
I think doing a tank tread propeller across the wings would be interesting (kinda like the idea of a lot of micro-propellers to get consistent thrust across the entire wing, but using a tank tread design instead). Maybe even having the propeller go inside the wing during the corners to try and prevent excess thrust at the wing tips (assuming that matters).
I second this. Need to do this to a bi-plane or annular wing. With two counter rotating tracks.
@@bp8652 lol it would be insanely hard
Actually, having that thrust at the wingtips can increase lift, if the prop blades are moving downwards at the wingtips: the vortex from the propwash neutralizes some of the tip vortex from the wing
I’d love to see more refinement of the tank tread prop. Even if you made it a circle, to get more radially symmetrical thrust, I still think it’d be neat, to go around the outside of a fuselage
You just do it at the end of the fuselage and it's called boundary layer ingestion. It's great for efficiency.
edit: 2 large propeller blades will be most efficient.
Yeah, the opposite of the Stipa-Caproni! Not necessarily a good idea, but cool!
I think the biggest barrier is the lack of guides. The belts were constantly bending inwards between the gears, as is natural for a high speed belt without extreme tension. You can see the belt bending inward and the props hitting eachother at the tips, even at fairly low speed. Just putting a block of wood between the gears for the belts to slide over would likely fix the problem. Hollow out said block and put bearings on both sides so the belt can slide across with less friction, if you want to make it well.
@@AngryAlfonse I think the blade pitch is also an issue. Normal propellers 'twist' so that the forces all along the blade are even. The slower moving part near the hub takes a bigger bite of air, the faster moving part near the tip takes a smaller bite, but with the speed difference they're experiencing the same amount of force (on a good prop). With the tread system, to have the same even force all along the blade you'd need to somehow have every blade 'straight' on the flat portions and 'twisted' on the curved portions of the track.
@@AngryAlfonse Yeah this was my thoughts too. Needs to be tensioned (there was some noticeable slack on a few of those before he turned them on), and guides if tensioning isn't possible/isn't doing enough.
The clip of the 20 stac bluetooth kite taking off has to be one of my top favorite PeterSripol moments, I keep coming back to watch. The beautiful quote, "Just gonna go for it", the sound of the propellers as it violently jerked around and gained altitude, and everyone's excitement and disbelief that it is working. Absolutely perfect moment
Going back to the old simple stuff, fun airplane experiments. I love it!
I don't know about simple, maybe simple compared to some of the other crazy things Peter builds, lol
@@EJ-74 Yeah more like in the same way building a car is simple to a rocket scientist haha
A revived Myth Buster's type show with this guy would be a big hit.
Peter Imahara
Yeah
The tread propellor firing blades in all directions as it slowly sank made me genuinely laugh out loud!
Now put the tread propellor around the outside of the 20-stack wing - perfectly even thrust :)
That multi wing plane was amazing, so goofy looking yet it seemed to fly well. Really well done and Very entertaining
0:38 That's actually the proposed airliner design standard that was introduced after a couple of them flew into buildings and didn't bounce back.
Yes, especially the front spring seems to be a great safety feature. Maybe one can use ropes to align it with the axis when it's fully extended?
i get it 🤣
The guide rail spring is actually a really good idea on small little models like this for nose down impacts
Would be interesting to see a plane propelled by a track running the length of the fuselage with either scoops or flaps to propel it. Maybe the half of the tracks that moves noseward could go inside the body to reduce drag?
Always wanted to try that!
I think the issue with that idea is that only the most rearward scoop would be doing much.
@@robbhays8077staggered scoops
wouldn't work. the simple fact that you would be pushing air in both directions even if you hid half of it in the body.
you cant run the scoops though a force field vacuum.
YES but a water vehicle!!
@petersripol I used to watch you as a child, back when you averaged under 30k views. It made my day rediscovering your channel and to see the tremendous growth! Congrats to your success, hard work, and dedication! 🎉🎉
the multi-wing was nuts. The climb ability and the land like a helicopter styles were sick as, not to mention the sick loop-de-loop
lol
The screech when the "working" tank thread jams is straight out of a sci-fi movie :D
An idea:
Do the multi wing plane and use the tank prip system with the oval going up and down. Since the multi wing plane doesn't need too much thrust then it would be interesting to see how it would work
It also makes it twice as weird
Circle plane wings, tank prop going on the outside of the wings. No hard turns, and multi winged weirdness.
For the tank propeller, blade strength is affected by print layer orientation. Also, some kind of tensioner probably would help mitigate blade collision.
what if you put four multiwing planes together to make a wing box and put the props in the center to make a flying box. I think that would be funny lol
7:00 Just imagine if you will with me that you were a pilot in that position and you see the BLADES OF YOUR PROP come flying off. You could count the individual blades and know as the next blade cycles around to the under gear and you know that one will be violently ejected from your plan mid flight.
That multi wing had too man wings. It was entertaining. I especially liked the way it flew so slow. Is there anyway you can do a "Slowest airplane we could build". Something like that would be really interesting also.
'Tis not a multi wing, it's flying window blinds!
Mom: Please stop making planes out of my blinds.
The prop is a cool idea, I think to execute it with any amount of success though you'd need it to vary its pitch on the straights to match the force being outputted by the ends... might even help with the blades flinging off
Love the flying window blinds. I'm also thinking that a longer fuselage might make it more stable. As for the track, it really needs to be on a wheel.
"window blinds." . . hm -then perhaps he could make a "louvre" wing, LOL
In all fairness, the original Phillips had a higher thrust line (though not good engineering). It folded one set of wings upward on its first test flight, did it not?
yeah my first thought was, "hang on why don't you put your fuselage actually through your center of lift"
exaggerate the tailwheel plane aspect basically, run the spar from the center of the blinds and tilt back the plane as much as necessary to get the back wheel to touch the ground on takeoff. if it's sitting at 45° so be it, get enough velocity to fly the tail and you'll take off fine
(my second thought was, ailerons, since roll seemed like a significant issue)
For the treadprop, make the blades 80% shorter, and more RPM. They won't collide each other that way
Or, Do a triangle loop and reduce the belt length to minimum.
I think they collide due to high angular acceleration as they go from a curved path to a straight one. I think he should make the path more egg shaped to minimize the acceleration felt by the blades.
Oval path plus low rpm, flexible blades with high durability to absorb the weird rotational stresses. That’s my bet at least.
also belt tension
@@lacucaracha111111 I'm shocked I'm not seeing this mentioned higher up.
if you remake the track propeller id suggest adding track rails so the wear is even and it might help with resistance
I think you’ll see more success with the track propeller if you place track sliders (supports) between the drive wheels on the top and bottom. This way the track won’t be able to dive as it leaves the wheels (which seems causing the propeller tip collisions). Whether the propellers are rigid/strong enough to withstand the tip deacceleration remains to be seen 🔎
I wonder if anyone has ever added control surfaces to those paper loop gliders, imo that'd make an interesting build.
Peter did a giant circle plane at a Flite Fest a few years ago. Other planes flew through it! Look back about 6 or 7 years.
The 20 stack is insane. To see it actually fly is outstanding and doing some acrobatics too..
Good stuff.
That thing was practically just a bluetooth kite in that headwind pfft
That stock footage pun was something i was not braced for.
Oh god, this comment made my brain buffer
This was truly a LOT of fun! Thank you Peter and crew!
Tank thread propeller was pretty interesting, would really like seeing a bigger version of it spanning the whole wingspan of the plane and some bigger roller wheels so the velocity change is not as abrupt
2 of them for counter rotation
That's what I was thinking, take advantage of the change in form factor and have it cover a really wide area without being very tall.
@@米空軍パイロット Was thinking the same thing, if there's two (one for each wing) you can even have tank-style steering for the plane too!
I'd like to see improvements made on the track plane. That was pretty awesome.
Same
I've always wanted to build a tank-tread paddle wheel drive for a watercraft. I imagine the blades dropping flat on the forward direction, then popping open when they enter the water. This could theoretically even work if the system was fully submerged. Idk if you've done boats, but very much enjoy your aircraft vids. Keep it up:)😊
Probably my favourite videos of yours of recent times, just hilarious. I especially loved how even though the tread props were clearly so sketchy with blades shooting off left and right, once you were outdoors safety glasses were optional 😂
I think the main 2 issues you’re running into with the track props is 1. You have collision between your propellors, because your track isn’t guided enough. You could create a sort of moat on the inside of the track to guide it better. 2. Your propellors keep breaking off due to the centrifugal forces, you you might want to machine them in something stronger, like a light metal to make this work better, and machine them all in 1 piece with each tread link for less chance of parts just falling apart.
I wonder if printing them on their sides would help. I noticed the printing was done so the layers were not aligned with the direction of the force. This probably makes the surface smoother, but weaker
needs chain tensioner
Love seeing old plane ideas tested and improved! So wild!
These were goofy but so much fun to watch.
The 8:56 faceplant was great 😅.
That was so much fun. More please!
I'd like to see a long caterpillar plane with 6 or more flapping wings.
For 3D printed props, adding a channel for some strong thread and CA allows you to print vertically (the nice way) and then add the needed strength. A bit more sanding needed, but it can work well.
Respect for your perseverance and patience Peter, I think you should build a Coléoptèr, it was a French prototype tail sitter vtol, as far as I know nobody has made an RC replica yet, but it would be really far out. also I think we definitely need an ekranoplan revisit, maybe one of those wacky mega GEV's the soviets wanted to launch spacecraft from.
keep making the inspiring videos.
Love it! Would be great to see more crazy-ass ideas from the pre-flight era, made from strong/light materials available today.
Maybe make a tread multi wing AND spring plane combined
Great vid as always!
I think the tank propeller can use some inner guides to dampen the violent inner turning on the edges as the blades seems to hit eachother a lot around where the round elements end.
The stacked plane is simply amazing, do you think you can make one that has a fuelselage that looks like a sailed ship? I can totally see the stack acting like some eco-punk flying sail for something like that.
it seems more like an helicopter than a plane
The ship idea even seems plausible
Yea, the tank propeller definitely needs runners or bogey wheels to keep the tracks straight between the wheels. Like you said, the blades kept contacting, and I’m certain that’s the main reason they kept failing and breaking.
It’s a really funky concept; I think a quad engine plane with the tank propellers linking the two engines on each side would look awesome.
I agree the 20 stack was amazing. I didn't see the flight characteristics coming and they caught me off guard. I like it.
Tank tread is super cool. I was thinking a guide rail under the track right after the wheels might stop the rotational momentum. I'm not sure if it would alleviate the stress at the base of the blades or cause more. The blades wouldn't hit at least. Thanks for sharing and I love the shirts!
Man, this was insanely fun to watch! Your crazy experiments had me on the edge of my seat. Keep up the wild ideas, can't wait to see more wacky airplane stunts!
Much like you I've 3D printed plenty of parts just to see if they even work work or are somehow better. So for every one of your failures, know that I truly understand how you feel.
But when it just works, that's the best feeling ever
0:43 They could have implemented this in 2001...
Xd
I want to see how you cound push the tread-prop idea with optimization for different fuselage cross-sections. Could you integrate an ellipsoidal prop-track into the surface of the fuselage or a nacelle?
I think that the blades on the tank track propellers keep falling off due to crashing into each other. On the straight portions only a small amount of give is needed to make them collide. A simple fix would be to just make them better spaced out. Though making it stronger works too. Either way its kind of a doomed concept from the start but fun to watch it work!
Yep, or maybe give it a chain guide? Perhaps a slightly bent one so there is not a straight section but they whole thing is more like an ellipse.
What I saw looked like too much flex in the track. Some guide and tensioner wheels should help with that issue.
It appears to me that the props are colliding with each other specifically where the relative angles change between the props (on the turns). I think either shorter props or larger gaps between them might help. But you probably already figured that out.
I always wondered if multiple wings would allow slower speeds in a shorter wingspan.
Awesome to see it up and flying! I am Stunned! 🤓
You need considerable space between wings to get efficient lift. Too much turbulence. One quadriplane in WWI, but triplanes seemed to be the reasonable limit. Some special use biplanes still exist. Check out Staggerwing and Griffon Lionheart for true beauty.
The Sopwith Triplane was designed to overcome the poor visibility of its predecessor, the Sopwith Pup, by reducing the chord (front to back dimensions) of the wings while maintaining the same lift, and it worked out. I believe the same would hold true for wingspan. You’d get less efficient gliding, but faster roll rate.
IIRC, the minimum space between wings for efficient lift is the same as the chord (measurement from front to back) of the wings (or, if the wings you’re spacing don’t have the same chord, then the spacing is the average of the two chords). Also, IIRC, staggering the wings lowers the required spacing distance; not sure what the formula for that was, though.
i used to love making paper planes, and trying to get my balloon and ornithopter designs to work. these silly ideas really wanna make me get into aircraft again :D
I love love love the multi-wing plane!! I really like the way it flies in the wind. Something about it gives very steampunk-machine-impracticality vibes. Please do it on a large scale, it would also be super cool if the fuselage was really tall with floors and floors of little boeing windows, or maybe even have several ones stacked!
Peter shud get a guinness record for making anything fly!!! Awesome again
Heck yes, more airplane content! Thank you Peter Shripol!
9-11 twin towers would have survived when those planes had springs like that 0:50 so they should make it mandatory for every commercial airplane from now on
That multiple winged plane is a must do on a bigger scale! That was amazing to see it actually functioning like a helicopter basically but still crazy controller. Honestly maybe a rework of the design so it's not as wobbly on take off lol😂 but excellent job! Surpassed my hypothesis on it so I'd love to see more! I see this being a really fun one to fly around especially after a little rework of the design it's gonna be kinda next level!😂
That was really cool... it almost seemed to act like a VTOL! All those wings were a lot of drag, but the stall speed was really low.
@@marasmusine right exactly thats why I'm kinda curious an excited to see them try to rework some of the design an get it's just a but more stable maybe even put a dummy on it that scales from about roughly 150 to 200 pounds person. Cause ot almost seemed to need something riding on it to help with the weight distribution
I feel like Boeing would be the kind of company to encourage alternate merch, like an opposite disney
that track blade thing was wild i did not think it had any chance of working. if you find the time i think trying the track blade in a round config with shorter higher pitch blades would make some impressive results, be pretty cool to see anyway.
I got a better idea, why not just do 4 of them in a smaller radius of wheel! (lol your engineering mind is getting the best of ya you’re trying to improve a design that’s already ridiculous, it’ll only lead ya to the modern prop!)
@@arcosprey4811Yup. My mind briefly ventured that way and realized it. So I figured the best idea for that type was to specifically avoid circles
Some the best videos on TH-cam! Love your work Peter
Really fun builds! You should consider printing the track blades laying on the side to get more strength out of them maybe?
Support material becomes an issue then. It can work, but it adds a lot of time and won't allow as many blades per print.
My solution was to use strong thread and superglue.
1:39 Annoying mosquito mode activated😂
At 3:45 - "stock" footage while holding a "pistol brace" killed me, hahahaha!!!!!! Very good one guys! This is what I love about this channel, the love for freedom and the 2A :)
11:25 I laughed so hard!!!!😂😂😂😂😂😂😂
3:45 NO DONT CALL IT THAT THE ATF WILL SHOOT YOUR DOG
You guys are skilled enough to pull of all these silly concepts! Mad respect.
if its boeing im not going
me to
Good twist on words there
If it's boing then I'll.deploy
1:34 felt like a 9/11 victim POV
Peter always doubles up on PPE. Safety glasses +safety squints=immortality
Yeah, those blades were shooting everywhere
me: mom can we have a vtol
mom: no we already have one
the vtol at home(the third plane):
03:40
@ATF - he officially acknowledged it as a Stock!
Going for a shirt, but the payment system is not working. Take my money!
Patreon squad might be a little early 😂 should be live soon!
How was that comment 4 hours ago?
@@kanyemiddleastyea how
wtf@@kanyemiddleast
@@kanyemiddleastvideo is probably released early for patrons or members
4:13 now that's a "prop"per dog 😂 (sorry)
What if the propeller track is arranged horizontally so it pushes air over the whole wing?
12:30 it's a VTOL!
This video gives the 2015 video vibes
American planes after 911: 1:46
After watching this video, I ask myself a question, can you make this nono place flying machine used by the bad guys in the film Tea Incredible.
1:20 WTF?! WHYYY
There’s a Boeing joke in here somewhere
What?
The “more power…more power” bit!! Snuck it in there pretty slickly
BONER ?
My GF wants to know where she can buy this 1:13
12:20 VTOL
Fr
for me, its more like a STOVL aircraft.
1:06 why do I find myself salivating all of a sudden??
No comment
Delete this
I liked my own comments
7:10 - we lost all blades, objective clear, now landing 😂😂😂 It really did it, as if it was it's purpose 😂
I love this channel. Every once in a while there is just a video of some crazy flying contraption and im here for it all.