I resurrected a 1996 that I rode the hell outof forthe next ten years. Sold it . Two years later in 2016 got an 03 . Still riding it. Gen 1 KLRs are very resilient machines. Doesnt take a whole lot to get them up and running again. My favorite motorcycle
My 1985 KLR 600 has been sitting for over 20 years in a nice dry climate climate-controlled basement. I may try to start it up this summer. I bet it will start right up with some fresh fluids and battery.
Excellent! Just finishing working on my newly acquired 1999 that had not run for 10 years. 13000km. Took me a bit longer than you to make it run. Just went through the Doohickey mod. Long but not difficult. The tension spring was bottomed out. Hope to be able to enjoy the KLR this summer. Great video! Cheers!
Same story for me. Got one week ago for 500. Very clean but sat. Needle float was stuck. After that started up. Ordered new filter, carb kit and petcock
Sure hope you found and replaced the plastic choke valve. If it's cracked or broken it will make all the difference in the world in how that bike performs and what kind of power you get out of it. I've had it happen to me, and it drove me nuts trying to get to the bottom of the problem.
i just picked up one of these yesterday for a cheap price. we managed to start it on 2 year old fuel so i had hopes that it would be something i could ride fairly soon with a little bit of carb clean and a new battery. still in process of cleaning the carb as it was very dirty. will only run on choke right now and has zero throttle response, so something is clogged up bad, even after my initial carb clean which included the jets. gotta dig more.
@@gavinleeroscom1167 mine cranked without much trouble, first time firing it up did take a while. what helped for me was taking the carb off and handing it over to a buddy to get ultrasonic cleaned. bike did give me a bit of trouble trying to run correctly, air box was filled with spider webs and what not, spark was inconsistent. bikes thatve been sitting for so long can cause headaches haha. Hope i could help
@@chefboyardee8278 thank you that helps alot but im finding trouble finding where to buy a whole new wire setup cause i really need to rewire her do you know where i can get one by chance.
@@gavinleeroscom1167 that's a tough part to get, i got all the parts for my bike used from facebook marketplace. i tried looking for those types of ads where someone has a complete klr that theyre parting out, i bet you could buy a wiring setup from there.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
I resurrected a 1996 that I rode the hell outof forthe next ten years. Sold it .
Two years later in 2016 got an 03 .
Still riding it.
Gen 1 KLRs are very resilient machines.
Doesnt take a whole lot to get them up and running again.
My favorite motorcycle
My 1985 KLR 600 has been sitting for over 20 years in a nice dry climate climate-controlled basement. I may try to start it up this summer. I bet it will start right up with some fresh fluids and battery.
Amo el sonido de la KLR por la mañana!!
Excelente!!
Saludos desde la otra punta de América. El Sur
Don't front on the (K)il(L)er (R)oach! You knew darn well it would run 😄. Got my 2022 Adventure model last week. Hope I get 20 years out of it!
Great thanks very much - I have just got a 2005 that's been sitting and this is a great vid to point me in the right direction.
Excellent! Just finishing working on my newly acquired 1999 that had not run for 10 years. 13000km. Took me a bit longer than you to make it run. Just went through the Doohickey mod. Long but not difficult. The tension spring was bottomed out.
Hope to be able to enjoy the KLR this summer.
Great video! Cheers!
I hope you get yours running soon. Cheers!
Of course it will run it’s Japanese, that beautiful motorcycle would run if it sat 20 years. You can’t beat Kawasaki reliability.
just bought one, sat over 15 years 150 psi compression starts faster than friends 230f
Same story for me. Got one week ago for 500. Very clean but sat. Needle float was stuck. After that started up. Ordered new filter, carb kit and petcock
Sure hope you found and replaced the plastic choke valve. If it's cracked or broken it will make all the difference in the world in how that bike performs and what kind of power you get out of it. I've had it happen to me, and it drove me nuts trying to get to the bottom of the problem.
OK, now we're just gonna rip the air cleaner off, spray some carb cleaner in there and give it an Italian tune up, then it starts.
Fantastic Motorcycle KLR 650#1
i just picked up one of these yesterday for a cheap price. we managed to start it on 2 year old fuel so i had hopes that it would be something i could ride fairly soon with a little bit of carb clean and a new battery. still in process of cleaning the carb as it was very dirty. will only run on choke right now and has zero throttle response, so something is clogged up bad, even after my initial carb clean which included the jets. gotta dig more.
Why not? Needs a charged battery and check fluids/ replace some. And go!
Your putting a bit too much pressure on the float, while your working on it, it takes very little pressure to damage the seat or offset its level
my klr 600 has been sitting since 1993, got it running last week
hey i would like to talk to you about how you got yours running i currently have a 94 KLR 650 but itll crank once then not start not sure what to do
@@gavinleeroscom1167 mine cranked without much trouble, first time firing it up did take a while. what helped for me was taking the carb off and handing it over to a buddy to get ultrasonic cleaned. bike did give me a bit of trouble trying to run correctly, air box was filled with spider webs and what not, spark was inconsistent. bikes thatve been sitting for so long can cause headaches haha. Hope i could help
@@chefboyardee8278 thank you that helps alot but im finding trouble finding where to buy a whole new wire setup cause i really need to rewire her do you know where i can get one by chance.
@@gavinleeroscom1167 that's a tough part to get, i got all the parts for my bike used from facebook marketplace. i tried looking for those types of ads where someone has a complete klr that theyre parting out, i bet you could buy a wiring setup from there.
👍👍👍 Profi Praca 👍👍👍 Top 👌
Great video
Very nice video . Thank You very much.
Awesome!
Please where do you source your parts from? Got the same project, though on my side am doing a scrambler conversion. Feel appreciated from 🇰🇪 KE
Will it run? You can’t kill one. Fresh gas and a new battery is all you need.
I wish I could bring my 84 across the border to you
hermosa moto, lindo color
Nice man!
Seriously! They stole just the front tire! Might as well throw the whole bike in the back at that point
Good video! Check my klr650 rebuild out. Also a video of me trying to ride in. The sand.
Don't you know klr are bulletproof
so Canadian
Sell the rubbish
KLR Vancouver on Facebook