ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2024
- Looking for an upgrade for your backside? Take a look at these options from Sparco and Britpart. Everything you need to know about the seat and how to fit them.
Chapters:
00:00 Intro
01:50 Fitting the seat brackets
05:03 Sparco R100 seat
09:14 Britpart Sports Seats
12:42 How much?
13:12 Conclusion
DA1895 - PAIR OF SPORTS SEATS FOR LAND ROVER DEFENDER - COME IN BLACK WITH DIAMOND PATTERN (REQUIRES MOUNTING KIT DA2778)
www.lrparts.ne...
DA2778 - PAIR OF MOUNTING PLATES FOR SPORTS SEATS ON DEFENDER - FOR CORBEAU, SPARCO AND DA1895 SEATS
www.lrparts.ne...
DA7306 - DEFENDER SEAT RUNNER - FOR SPARCO SEAT - WILL FIT ONE SEAT
www.lrparts.ne...
DA7307 - MOUNTING KIT FOR SPARCO SEAT - REMOVABLE - R100 - FOR FITMENT TO LAND ROVER DEFENDER
www.lrparts.ne...
You mentioned the Exmoor trim rear seats, i think you should also review the Exmoor front sports seats too. They are way way better than those awful britpart seats, have an option for heating and most importantly, have removable bases.... And lets face it, any defender must have removable bases as owners are in there every 5 minutes. Thanks
Thanks for taking the time to make this video. Very helpful
Loving the quality of these videos
The seat box on a defender reclines. You are meant to use the larger spacers on the rear to counter it so it make the seat level
Great tech videos and really well presented 👍🏻👍🏻
Need to consider how often you need access under your seats,
Good review, thanks.
So seemingly neither allow access to boxes beneath the seats....🤔
Seems a bit stupid/short sighted...
No, thats a big draw back.
@@LRLiveUK I realise my original comment seems quite harsh, "draw back" is probably a much fairer way of putting it.
Thank you for taking the time with the video.
No information regarding fitting in a landy with a rear bulkhead?
These will both fit fine in a defender with a bulkhead as they work off the same mounting positions
@@LRLiveUK I didn't phrase my question properly, is there one that's "shallower" than the Other? Being 193cm I can't really afford losing space due to a thick backrest.
@@FreddyFerris They're actually slimmer than the standard seats so should give you some extra room. Also, with the Sparco set up you can raise the base up so that the rails clear the rear ridge that usually stops the seat going back fully. Obviously depends on how you have your seat set up. If you recline heavily then you will be a bit limited. I'd definitely recommend a bulkhead removal bar if you're struggling.
www.lrparts.net/da1810-defender-bulkhead-removal-bar-kit-for-the-taller-driver.html
@@LRLiveUK Thank you that's good to know! Might have to look into these then! I have had all my cappings galvanized including the bulkhead one so it would break my heart to have to remove/cut through! Thank you for the infos!
Probably don't fit a truck cab?