This is the first time I didnt get confused watching a video about cutting machines. 😅 I get my Portrait 4 in a few days and you have been super helpful. Not a lot ot content for the 4 and it's been hard to find guides for those who are new to machine cutting. Thank you so so much! Looking forward to more!
@heymandyrigma so glad it helped! Keep in mind that most videos and tutorials will work for all machines. It does not have to specifically feature the Portrait 4. The main difference is the cutting width. The P4 uses a smaller mat and has only one tool housing... That's about the list of differences.
I don't know a thing about power tools on the Portrait 4. I bought the machine just a few days ago and I'm still getting to know it while skimming through your videos which are a great help by the way. But good to know that you'll have to operate power tools with the lid open, because cutting with the lid open alone means a good deal more volume. I guess it would bei the same if you could close the lid with power tools. Your hint with holding the cutting mat up is great as I still had precision issues even after calibration. I did the calibration again with holding the mat as you recommended and the cutting is now exact where it has to be. You won't find that in any manual, only practice can teach you that.
Thank you for this video. I had no clue on how to install the cutting tool. I’m surprised it was not part of the set up steps. I’m new to silhouette & this video was extremely helpful.
Such a great video because not only you explained the new features, but you also explained kiss-cutting stickers without a mat! I've been looking for this everywhere and you were the only one who explained that the reg marks are different! Or maybe someone else said it before but I this is the only video I found explaining that feature and specifically mentioning kiss cutting. Thank you!
I don't have any issues with any of the Silhouette machines reading registration marks. In most troubleshooting cases that we deal with, it's usually something in the setup that is causing it or a dirty machine. Going back to the basics of the print and cut and using all the defaults with a Silhouette cutting mat can eliminate a lot of the reasons a print and cut fails. If you are having issues, please set it up step-by-step following this and do a test print with a Silhouette cutting mat. silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/
Enjoy your channel. I understand I’ll have to update Silhouette Studio to the latest version for Portrait 4. Will the latest version work with my older Cameo 3? Thanks in advance.
Well, I'm able top close the lid with the power adapter installed. If you wouldn't be able to close the lid that would mean that you'd have to operate the machine with the lid open when using the heat pan, wouldn't it? On the other hand, what do I know, I'm new to this stuff. Just thinking out loud...
THANK YOU! My iMac couldn't download the SS software/do a firmware update via Bluetooth. Luckily, you suggested the printer to USB cable. So glad I didn’t throw that old cable away!!!
When the ES cutting mat comes, will it be compatible with Print and Cut? It seems like that would give you the bigger area and be much quicker than peeling individual stickers off a sticky mat.
Yes, the Electrostatic Beds are compatible with print and cut. Here is an example showing the ES bed with the Curio 2. The ES bed functions the same on all of the machines. th-cam.com/video/42qwrDzCUks/w-d-xo.htmlsi=vxa7R4hoYxTbGAsi
The Portrait 4 Electrostatic Bed will be the same cutting width and size as the cutting mat. This is 8.5" x 12". However, with the Electrostatic Bed, you cannot cut edge to edge or the electrostatic charge is broken. That isn't an issue with print and cut since you don't cut edge to edge because of the registration marks.
Thanks for your replies! I’m mainly interested in cutting paper and cardstock (up to about 250gsm) at A4 size. Is the Portrait 4 equivalent to the Cameo 5 for those tasks or does the Cameo 5 have anything that makes it a more capable machine? I’m also interested in using the PixScan mat and possibly the sheet feeder (using the pop out cutting method).
@@roslynjoy from what you describe, you may want the Cameo 5 - it does have additional tools and dual tool housing. 250 gsm might be a bit thick for use with the ES bed, but you never know until you try!
I'm looking in to the Portrait 4 and can't find an answer to (probably a stupid) question, but can sketch pens be used with the portrait 4? I can't seem to find an answer to this question, I know there's only one tool holder but can pens be used in it with the adapter? Thanks!
Yes. It's just like all the older models. The blue adapter can be used with the black bodied Silhouette sketch pens or the Type B pen holder for regular pens.
I'm having trouble keeping my portrait 4 connected. Everytime I turn it on I have to re pair it through bluetooth. Sometime 3-4x before it ever connects.I never had any connectivity issues with my cameo 4. I'm wondering if you've experienced this issue as well.
You don't have to pair anything..... in fact, having it paired in your computer settings can interfere with the connection entirely. The only place the bluetooth needs to be connected in on the Send tab in the Silhouette software. Click on the little machine icon with the red number on it and that is where the connections show. If it is taking longer than you want to connect, swap it to a new connection in that menu and swap it back.... it usually connects within a few seconds.
@@SilhouetteSecrets hmmn. If I don't pair it just sits there and flashes, even if I try to click on it through the software. I don't know it also won't do print and cut registration half of the time. It just says nah. I'm wondering if mine is defective 😭 my cameo never gave me any trouble at all.
@danaking8930 I'd recommend reaching out to Silhouette Support with a complete description of what it's doing, photos, and video for both issues. For print and cut, make sure you are using all the default registration marks, nothing is in the crosshatched area, you are using the Silhouette mat that it came with or the one specific for Portrait 4, and loading it next to the load line but not over top of it.
Silhouette can cut from a roll with lined material such as adhesive vinyl and heat transfer vinyl. However, if you are wanting to cut printed labels from a roll, it's not really designed for that as it uses registration marks to read where the design is. Setting up a long roll to cut with registration marks doesn't really work.
Follow this step by step and do a test print silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/ How does it cut with everything set at defaults?
That is very difficult to do. Microphones amplify everything, so it's not an accurate sound level on any video that's done. And don't have an older Portrait to compare it to. It is quieter. The loudest part is the blade adjusting.
I did try the mic thing in this Cameo 5, but again.... videos are not going to be accurate on the real-life audio. th-cam.com/video/aZtKkTA5F-M/w-d-xo.html
Hi does the portrait 4 foil on sticker paper? i have a minx machine and it's v hit and miss if the toner has set properly. If the portrait did foil on sticker paper i would definitely buy one.
You would have to test on sticker paper. It would depend on the actual sticker paper and foil used. Regular matte sticker paper should be no problem as it's paper.
I had trouble installing my premium blade and its adapter to the machine and I’m afraid I pushed it too much. Will that affect my blade or its cutting? 😢
Did you pull the lock out on the front of the machine? It should slide right in if using the proper adapter. I can't say yes or no on if it will affect it. The only way to know is to try it out. I would recommend giving the autoblade a chance too. The most common reason Autoblades have issues is because they weren't installed & locked in properly.
The Portrait 4 has more options available to it such as using the Powered Heat Pen, adjustable right roller, and a cutting width of 8.5" versus the old Portrait 1.
I updated my software last week or so ago to 4.5.735ssbe. When I go to your link and try to update, it wants to "Modify", "Repair", or "Uninstall". So I assume I have the updated version? I don't have my new machine yet, but when I go to the Page Setup in the program, none of the new machines show up in the drop-down menu. Do they show up once you connect your machine? I'm seriously thinking about the Cameo 5, but enjoyed watching this video, as I have the Portrait 3.
@amyb2593 in the Tool 1 housing, yes. There is a new Tool 2 pen holder being released as well, so the option to sketch and cut without swapping tools will be back.
@@SilhouetteSecrets oh, that's great to know! It would be nice not to have to swap tools. I enjoy your videos. I'm going to transition from Cricut to Cameo. I have had the Silhouette Business Edition for a few years, but I'm finding out more and more things I can do with it! It's really great. Thank you for all your expertise. I subscribed to your channel, so I'm sure I'll learn much more.
No. It does not have the auto load sensor on the Portrait. The Autoload is designed for the larger machines where it is more difficult to hold the mat up to the rollers and press the load button with 2 hands.
What kind of software enhancements are you looking for? The new machine models and the Silhouette Go App improvements were the main focus at this years Silhouette Summit. Software enhancements occur all the time with updates. If you have something specific you are looking for I may be able to advise better.
They don't really compare ... one cuts 8.5" wide and the other cuts 12" wide. Do you mean the new Cameo 5 or the Portrait 4? It really depends on what you would be using it for.
thanks for your answer 🙏🙏 If you only compared the work of both in letter size, which of the two would do it better? Cameo 4 or portrait 4? Which one would you recommend?🙏
I bought this machine because I thought it was best. Wrong. Should have went with Cricut. The first 4 times i used it to make stickers, the cuts with my portrait 4 were almost perfect. But after that, I am lucky to get 3 stickers out of a whole sheet that are a decent cut. Almost all the cut lines are way off and it appears to drift down the page. I have changed nothing. I didn’t even move the machine. I didn’t adjust any settings. I’ve double and triple checked everything they tell you to check. This is so frustrating. I guess I’m gonna have to manually adjust the cut lines? This machine has cost me money in sticker paper and time. I’m seriously about to throw it in the trash and buy a Cricut. I don’t even expect it to be perfect, but the cut lines for my stickers are way off and I cannot sell them that way. It seems this is a huge issue for a lot of people. Does silhouette plan on addressing this or fixing this? Is it a software issue?
I've had no issues with print and cut with the Portrait 4. Here is what I'd recommend even if you have tried other things - I'd recommend doing this in this exact order step-by-step and then how are the cuts... 1. Unplug the machine and then carefully move the blade housing all the way to the right and all the way to the left. Do this 3 more times and leave it on the right side. Plug it back in and turn it on. 2. Follow this tutorial and set everything back up at all the defaults for the Portrait 4. silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/ 3. Use the Portrait 4 cutting mat that came with the machine. Do not use any other cutting mats. Do not use an old Portrait cutting mat. It is not the same size. I show exactly the difference here silhouette-secrets.com/2023/12/02/silhouette-portrait-4-unboxing-tips-for-success/ 4. Hold the mat completely level as the machine is reading the marks. How does the cut look with the test cut?
Do NoT but a Cricut. I am going on my 3rd Cricut Maker3 and waiting for a replacement for the second time due to terrible calibration and constant critical machine errors. Print then Cut is terrible with Cricut and I have wasted up to a $1,500 between new machines and sticker paper replacements. Not to mention my business has been down since my initial replacement was issued and Won’t receive until another 2 weeks, mind you all said and done-It will be a month and half. I’m so done with Cricut-don’t do it.
@@jenna0616 I second that. I just returned my cricut explore 3 today, I was fortunate enough to get a full refund. I don't know what to get now. I might just take a break 😆
The new software for Mac is unusable. 4.5 has issues with software stating image is low res (even when it is not) so print and cut impossible. Silhouette told me this is a known bug but it’s still not been fixed.
Yes, it's been reported. They are working on it. The Beta version is actually supposed to improve the graphics, but there are still issues with Sonoma OS that are outside their control. But they are working to find a way around it. It does not affect all MAC users, though.
This is the first time I didnt get confused watching a video about cutting machines. 😅 I get my Portrait 4 in a few days and you have been super helpful. Not a lot ot content for the 4 and it's been hard to find guides for those who are new to machine cutting. Thank you so so much!
Looking forward to more!
@heymandyrigma so glad it helped!
Keep in mind that most videos and tutorials will work for all machines. It does not have to specifically feature the Portrait 4. The main difference is the cutting width. The P4 uses a smaller mat and has only one tool housing... That's about the list of differences.
@ Thanks for the tip. I will definitely binge-watch hour other videos, too. You explain it so well! 😊
I don't know a thing about power tools on the Portrait 4. I bought the machine just a few days ago and I'm still getting to know it while skimming through your videos which are a great help by the way. But good to know that you'll have to operate power tools with the lid open, because cutting with the lid open alone means a good deal more volume. I guess it would bei the same if you could close the lid with power tools.
Your hint with holding the cutting mat up is great as I still had precision issues even after calibration. I did the calibration again with holding the mat as you recommended and the cutting is now exact where it has to be. You won't find that in any manual, only practice can teach you that.
Thank you for this video. I had no clue on how to install the cutting tool. I’m surprised it was not part of the set up steps. I’m new to silhouette & this video was extremely helpful.
You are welcome! So glad it helped.
Great demonstration - you are such a great teacher! I have the original Portrait and this may have to be a Christmas gift to me!
Thank you!
Thank you so much! Learned not only important new features - but what to do in the Design software (and what to ignore!) you are the best! 😀
@@lisaedwards9124 yay! You are welcome!
Such a great video because not only you explained the new features, but you also explained kiss-cutting stickers without a mat! I've been looking for this everywhere and you were the only one who explained that the reg marks are different! Or maybe someone else said it before but I this is the only video I found explaining that feature and specifically mentioning kiss cutting. Thank you!
EllyMae, I really appreciate this video. I'm also a member of your FB group and it's so neat to get my newbie questions answered there. God bless!
@@athenamay30 so glad it helps!
this was such a good and helpful video! the online setup did not show all of this. Thank you!
@@annabellealaine you are welcome!
Great video! I am new to Silhouette and am so impressed already.
Thank you! Happy cutting!
Thanks for sharing
I don't have any issues with any of the Silhouette machines reading registration marks. In most troubleshooting cases that we deal with, it's usually something in the setup that is causing it or a dirty machine.
Going back to the basics of the print and cut and using all the defaults with a Silhouette cutting mat can eliminate a lot of the reasons a print and cut fails.
If you are having issues, please set it up step-by-step following this and do a test print with a Silhouette cutting mat.
silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/
Very good and helpful . can it cut through magnetic sheet 1mm thick? thank you
That will depend on the actual material and you would need to test it. It would most likely require several passes to cut through.
Enjoy your channel. I understand I’ll have to update Silhouette Studio to the latest version for Portrait 4. Will the latest version work with my older Cameo 3? Thanks in advance.
@@vspartner yes. It works with all the Silhouette machines.
Well, I'm able top close the lid with the power adapter installed. If you wouldn't be able to close the lid that would mean that you'd have to operate the machine with the lid open when using the heat pan, wouldn't it? On the other hand, what do I know, I'm new to this stuff. Just thinking out loud...
@@ralphm9365 you are correct. You have to have the lid open when using the power adapter and power tools on the Portrait 4.
THANK YOU! My iMac couldn't download the SS software/do a firmware update via Bluetooth. Luckily, you suggested the printer to USB cable. So glad I didn’t throw that old cable away!!!
Yay! You are welcome! So glad it helped!
Please is it just any printer cable?
@@esprawbeads yes, a usb printer cable.
Thank you very much for a great tutorial!
Do you know if there will be an electrostatic mat for the Portrait?
You are welcome! Yes, it's coming in 2024, just delayed in transit.
Great! Thank you!
When the ES cutting mat comes, will it be compatible with Print and Cut? It seems like that would give you the bigger area and be much quicker than peeling individual stickers off a sticky mat.
Yes, the Electrostatic Beds are compatible with print and cut. Here is an example showing the ES bed with the Curio 2. The ES bed functions the same on all of the machines. th-cam.com/video/42qwrDzCUks/w-d-xo.htmlsi=vxa7R4hoYxTbGAsi
And here is a 12" x 12" print and cut on the Curio 2 - th-cam.com/video/uTe7JTrl7Uw/w-d-xo.htmlsi=oQp5qaptwNIsDEcq
The Portrait 4 Electrostatic Bed will be the same cutting width and size as the cutting mat. This is 8.5" x 12". However, with the Electrostatic Bed, you cannot cut edge to edge or the electrostatic charge is broken. That isn't an issue with print and cut since you don't cut edge to edge because of the registration marks.
Thanks for your replies! I’m mainly interested in cutting paper and cardstock (up to about 250gsm) at A4 size. Is the Portrait 4 equivalent to the Cameo 5 for those tasks or does the Cameo 5 have anything that makes it a more capable machine? I’m also interested in using the PixScan mat and possibly the sheet feeder (using the pop out cutting method).
@@roslynjoy from what you describe, you may want the Cameo 5 - it does have additional tools and dual tool housing.
250 gsm might be a bit thick for use with the ES bed, but you never know until you try!
I'm looking in to the Portrait 4 and can't find an answer to (probably a stupid) question, but can sketch pens be used with the portrait 4? I can't seem to find an answer to this question, I know there's only one tool holder but can pens be used in it with the adapter? Thanks!
Yes. It's just like all the older models.
The blue adapter can be used with the black bodied Silhouette sketch pens or the Type B pen holder for regular pens.
@@SilhouetteSecrets thank you so much for the info!
@@rachelphillips3786 You are welcome!
Hi can I cut rhinestones with the portrait like I can with the cameo ?
You can cut rhinestone templates with the Portrait model, yes. The Portrait 4 has a cutting width of 8.5" wide.
@SilhouetteSecrets ok great I think I need to get this one. Having so many problems with my cameo guess it's old. Lol
Thanks
I'm having trouble keeping my portrait 4 connected. Everytime I turn it on I have to re pair it through bluetooth. Sometime 3-4x before it ever connects.I never had any connectivity issues with my cameo 4. I'm wondering if you've experienced this issue as well.
You don't have to pair anything..... in fact, having it paired in your computer settings can interfere with the connection entirely.
The only place the bluetooth needs to be connected in on the Send tab in the Silhouette software.
Click on the little machine icon with the red number on it and that is where the connections show.
If it is taking longer than you want to connect, swap it to a new connection in that menu and swap it back.... it usually connects within a few seconds.
@@SilhouetteSecrets hmmn. If I don't pair it just sits there and flashes, even if I try to click on it through the software. I don't know it also won't do print and cut registration half of the time. It just says nah. I'm wondering if mine is defective 😭 my cameo never gave me any trouble at all.
@danaking8930 I'd recommend reaching out to Silhouette Support with a complete description of what it's doing, photos, and video for both issues.
For print and cut, make sure you are using all the default registration marks, nothing is in the crosshatched area, you are using the Silhouette mat that it came with or the one specific for Portrait 4, and loading it next to the load line but not over top of it.
Where do we purchase portrait 4 cutting mats? I wanted to get extra ones in case I need them, but I can't find them in any website.
They have not been released yet and are in transit.
Can the Silhouette Portrait 4 cut labels from a roll?
Silhouette can cut from a roll with lined material such as adhesive vinyl and heat transfer vinyl.
However, if you are wanting to cut printed labels from a roll, it's not really designed for that as it uses registration marks to read where the design is. Setting up a long roll to cut with registration marks doesn't really work.
The cut line is misaligned. I have checked the paper size and backing paper. Is there any solution for the slight misalignment of the cut line?
Follow this step by step and do a test print
silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/
How does it cut with everything set at defaults?
@@SilhouetteSecrets The problem seemed to be that the media was inserted incorrectly into the machine.Thank you very much for your kindness.
@@pongorochanel you are welcome! Glad you were able to identify it.
what do you use for printing?
How do I print my design with the registration marks?
Here is how to set up a print and cut - silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/
Can you compare the noise from old machine to new machine? I want to know how much quieter the new machine is. Thx~
That is very difficult to do. Microphones amplify everything, so it's not an accurate sound level on any video that's done.
And don't have an older Portrait to compare it to.
It is quieter. The loudest part is the blade adjusting.
I did try the mic thing in this Cameo 5, but again.... videos are not going to be accurate on the real-life audio.
th-cam.com/video/aZtKkTA5F-M/w-d-xo.html
❤
Would you recommend the Portrait 3 or Portrait 4 for someone who has never had a vinyl cutter?
Either one would work, but personally, I'd go with the Portrait 4.... only because it cuts 8.5" wide and the rollers don't roll over the material.
@@SilhouetteSecrets from your video, the Portrait 4 looked more user friendly and easier to use!
When I do print and cut the colors become very dull and I never had this issue with cricut machines :/
Hi does the portrait 4 foil on sticker paper? i have a minx machine and it's v hit and miss if the toner has set properly. If the portrait did foil on sticker paper i would definitely buy one.
You would have to test on sticker paper. It would depend on the actual sticker paper and foil used.
Regular matte sticker paper should be no problem as it's paper.
thank you for your reply@@SilhouetteSecrets
@@JoanneM0116 you are welcome!
I had trouble installing my premium blade and its adapter to the machine and I’m afraid I pushed it too much. Will that affect my blade or its cutting? 😢
Did you pull the lock out on the front of the machine?
It should slide right in if using the proper adapter.
I can't say yes or no on if it will affect it. The only way to know is to try it out.
I would recommend giving the autoblade a chance too. The most common reason Autoblades have issues is because they weren't installed & locked in properly.
Hi! Can I use the premium blade normally used in Portrait 3 and older models to the latest Portrait 4?
With the black adapter, yes, or the 1 mm blade is the exact same blade, but no adapter is needed.
Great! Thank you ☺️
Is the S. Portrait 4 $100 better than the S. Portrait 1?
The Portrait 4 has more options available to it such as using the Powered Heat Pen, adjustable right roller, and a cutting width of 8.5" versus the old Portrait 1.
Can the Cameo 4 autoblade work with the Portrait 4? If not, which one works?
Yes. It is the same blade - Type B Autoblade.
I updated my software last week or so ago to 4.5.735ssbe. When I go to your link and try to update, it wants to "Modify", "Repair", or "Uninstall". So I assume I have the updated version? I don't have my new machine yet, but when I go to the Page Setup in the program, none of the new machines show up in the drop-down menu. Do they show up once you connect your machine? I'm seriously thinking about the Cameo 5, but enjoyed watching this video, as I have the Portrait 3.
Yes. Sounds like you have the currently version and you do need to connect for those models to show up.
@@SilhouetteSecrets thank you so much. Can I use the pen holder than I currently have for my Portrait 3 for the Cameo 5?
@amyb2593 in the Tool 1 housing, yes. There is a new Tool 2 pen holder being released as well, so the option to sketch and cut without swapping tools will be back.
@@SilhouetteSecrets oh, that's great to know! It would be nice not to have to swap tools. I enjoy your videos. I'm going to transition from Cricut to Cameo. I have had the Silhouette Business Edition for a few years, but I'm finding out more and more things I can do with it! It's really great. Thank you for all your expertise. I subscribed to your channel, so I'm sure I'll learn much more.
@amyb2593 Yay! I'm so glad it helps!
Is there auto load on portrait 4 like in cameo 5?
No. It does not have the auto load sensor on the Portrait. The Autoload is designed for the larger machines where it is more difficult to hold the mat up to the rollers and press the load button with 2 hands.
Great video. Do you know if they have new software enhancements?
What kind of software enhancements are you looking for?
The new machine models and the Silhouette Go App improvements were the main focus at this years Silhouette Summit.
Software enhancements occur all the time with updates. If you have something specific you are looking for I may be able to advise better.
Which is better cameo 4 or new portrait 4, in your opinion?
They don't really compare ... one cuts 8.5" wide and the other cuts 12" wide.
Do you mean the new Cameo 5 or the Portrait 4?
It really depends on what you would be using it for.
thanks for your answer 🙏🙏
If you only compared the work of both in letter size, which of the two would do it better? Cameo 4 or portrait 4? Which one would you recommend?🙏
@@vidaencristo1857 They are both great and do the same things, but you'll have more options with the Cameo 4/5 due to the wider cutting width.
Thank you very much 🙏👍👍👍
I bought this machine because I thought it was best. Wrong. Should have went with Cricut. The first 4 times i used it to make stickers, the cuts with my portrait 4 were almost perfect. But after that, I am lucky to get 3 stickers out of a whole sheet that are a decent cut. Almost all the cut lines are way off and it appears to drift down the page. I have changed nothing. I didn’t even move the machine. I didn’t adjust any settings. I’ve double and triple checked everything they tell you to check. This is so frustrating. I guess I’m gonna have to manually adjust the cut lines? This machine has cost me money in sticker paper and time. I’m seriously about to throw it in the trash and buy a Cricut. I don’t even expect it to be perfect, but the cut lines for my stickers are way off and I cannot sell them that way. It seems this is a huge issue for a lot of people. Does silhouette plan on addressing this or fixing this? Is it a software issue?
I've had no issues with print and cut with the Portrait 4.
Here is what I'd recommend even if you have tried other things - I'd recommend doing this in this exact order step-by-step and then how are the cuts...
1. Unplug the machine and then carefully move the blade housing all the way to the right and all the way to the left. Do this 3 more times and leave it on the right side. Plug it back in and turn it on.
2. Follow this tutorial and set everything back up at all the defaults for the Portrait 4.
silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/
3. Use the Portrait 4 cutting mat that came with the machine. Do not use any other cutting mats. Do not use an old Portrait cutting mat. It is not the same size. I show exactly the difference here
silhouette-secrets.com/2023/12/02/silhouette-portrait-4-unboxing-tips-for-success/
4. Hold the mat completely level as the machine is reading the marks.
How does the cut look with the test cut?
Thank you for your reply! I will try these steps in order.
@@Leah-m3dHi, did you fix it?
Do NoT but a Cricut. I am going on my 3rd Cricut Maker3 and waiting for a replacement for the second time due to terrible calibration and constant critical machine errors. Print then Cut is terrible with Cricut and I have wasted up to a $1,500 between new machines and sticker paper replacements. Not to mention my business has been down since my initial replacement was issued and Won’t receive until another 2 weeks, mind you all said and done-It will be a month and half. I’m so done with Cricut-don’t do it.
@@jenna0616 I second that. I just returned my cricut explore 3 today, I was fortunate enough to get a full refund. I don't know what to get now. I might just take a break 😆
The new software for Mac is unusable. 4.5 has issues with software stating image is low res (even when it is not) so print and cut impossible. Silhouette told me this is a known bug but it’s still not been fixed.
Yes, it's been reported. They are working on it. The Beta version is actually supposed to improve the graphics, but there are still issues with Sonoma OS that are outside their control. But they are working to find a way around it.
It does not affect all MAC users, though.