@@justincoats7236 because it takes the fun out of building your own…. The cost would be astronomical, & all other manufacturers would have to do the same…. Yamaha as a brand have always produced a very capable bike. It’s up to the owners to make it how they want it. 👍🏼. Also what Roland’s made will be similar to a Factory spec Motor. 👌🏼
this is amazing about to buy a 125 for next year to practice on for racing and wanted to get some factory parts for it and i now know what to get from this video thanks al ot lazer
Nice setup! Back when i ran a longrod kit on my 95 yz 250 we had to run a stock piston but longer rod, cyl spacer and 2 base gaskets. It was great in that bike.
Great video Max, you have us all hooked on the new mini yzilla project, what you're is awesome. God we would all love to have a friend like the genius Roland , can't wait for the next episode , Jesus max your smashing it.
I'm building my lambretta jet 200cc at the minute it's a 225cc kit being ported and stroked from a 58ml crank to a 62ml crank should b close on a 250cc once finished, different kettle of fish but I'm still on a 2stroke 😜👍
£610 Suter Mx Line clutch with diaphragm spring. @13.40 If you listen carefully there is some slight slippage(ha,ha) around the word 'instigates' about the clutch basket used, The Suter comes supplied with inner hub, but one has to use the stock outer basket? Is the carb a Lectron? Brake mean effective pressure is what he's trying to say @15.08
MAX great video! Would like to see you build a yz325 and a tuned yz250 then you’ll have a full fleet of these special Yamaha’s and then see what’s fastest around different types of tracks
Nice Bike. Would love to see you and Roland compare a good old carburetor to the new school Lectron and Smart Carbs. Would be interesting to see how they affect the powerband and which one is the best. I bet Roland's carb tuning could beat anything else on the market but would be cool to see a track and dyno comparison.
Those carbs aren’t good for high level racers. No one ride with those in EMX125 or schoolboys1 in the US. Many people were putting Keihin carbs on KTM’s too as it’s better and easier to jet than Mikuni
I’ve a mate that engineers 2 stroke engines like Roland and he did one of my Stihl chainsaws on the side. It’s absolutely unbelievable now I keep it as a show off saw 😂😂
Brilliant video. Very interesting.. especially the part about the cooling...as someone with a tuned 2005 Yz125cc can you tell me what fuel is being used as ive had problems with regular petrol and super unleaded with pitting my cylinder head 😀
Mugen Honda had a works bike you could buy many, many moons ago. It was a sub-200lb 125 with a full works Mugen engine, loaded with titanium with what was then works suspension. It was actually too light and exotic to run in US AMA Pro races because of the production rule- it was too light. It was also much more powerful than a stock CR. Porting secrets are no secret to me- Ive been removing metal and reshaping ports for yesrs too..
Funnily enough i used to wear Lazer helmets back when i was a kid, i loved the designs so much. That's actually where the 'Lazer' in 999lazer comes from!
i would really love to watch a full detailed documentary with an explanation of all available tuning options for 2 stroke bikes. Really loved to see how he turned this bike into a race machine. I have a 50ccm derbi senda myself and cranked it from stock (3PS) up to 25 PS with less than 500$ of parts. Tuning really is a great option especially for low ccm bikes. 🔥
no as it doesn't affect the gears in that way. My personal bike is a 2011 Y125 which had the gears "super polished" when it was new and it is still going strong.
Man I love seeing the wizard at work my question is are those radiators available for any brand 2 stroke and if so is there any information or link to get some
Why can't Yamaha do half of these mods for the next year? They won't do anything. They should have 10 times the knowledge and engineers as Roland. It wouldn't cost them very much.
Hi max, any more info on the custom rads roland has in his hand and will they fit my 2020 yz125? Loving the project and in using allt of the same methods as roland to get my yz125 race bike ready👌👍
Hi Alex, Roland's company makes the rads. They are pretty trick and I have them on my own 2010 YZ 125 too. His contact details are on www.motocrossdirect.co.uk/
MX will die soon if you do not learn about who is destroying our world: Europa the last battle:www.bitchute.com/playlist/hmv3AI5oVvJm/ You Are Amalek: odysee.com/@Domerilo:0/You-Are-AMALEK-FinaL:d The Greatest Story Never Told: odysee.com/@WhiteMeower:e/Adolf-Hitler---The-Greatest-Story-Never-Told-Original-English-Full-Version-HD-6h-32min:9 Hellstorm: odysee.com/@RenegadeBroadcasting:3/Hellstorm:36IS IT SEQUITUR PART. 13 www.bitchute.com/video/KqDH3N66HTAi/ 9/11 missing links: odysee.com/@TheJewWorldOrderExposed:d/9%E2%88%9511-Missing-Links:4 In the name of Zion: odysee.com/@languagebarrier:e/inthenameofzion:d New world order communism by the back door: odysee.com/@Slammdcrxx:8/New-World-Order---Communism-By-The-Backdoor:a Defiant: odysee.com/@Blackpilled:b/Black-Hate-Broadcast_1:d The Kalergi Plan: odysee.com/@RightAboutEverything:8/Matthew-North-Kalergi-Plan-Documentary:8 HIDDEN HISTORY OF THE INCREDIBLY EVIL KHAZARIAN MAFIA odysee.com/@LaLibert%C3%A9:41/%E2%80%94_HIDDEN_HISTORY_OF_THE_INCREDIBLY_EVIL_KHAZARIAN_MAFIA_%E2%80%94:2 LESSONS OF HAITI BY DR. WILLIAM PIERCE: odysee.com/WLP-Haiti:d media.gab.com/system/media_attachments/files/131/631/125/playable/a1394182f5614b43.mp4 Then go to goyimtv and get to work!
Put a 250 engine in it fastest 125... chassie lmao if your guna bore it out it aint a true 125 so might as well get a bigger engine on same light weight feeling frame
It isn’t bored out, nor is the stroke any different, it’s a longer rod to change the rod-ratio, and a shorter piston to retain the correct piston deck height.
The worlds best 125 is actually a bored out 125. Like a 134cc or even better, a 150cc. A ported and milled carb works too. Basically, its a cheater bike
I used to love 125's then I turned twelve and have been able to get one that feels like I'm not completely wringing the guts out of them just to get one to go.
The bike looks sick…. Can’t wait to see her rip the track, Roland is a absolute genius, the Don of 2-stroke wizardry
Thanks for watching Dave
👍👍👍👍❤🎉
No dyno, no numbers, no lap times? Maybe i have missed the video with that stuff, back to searching for more awesome videos.👍
Roland’s knowledge is priceless!!! He’s the Yamaha Genius.
Why can't Yamaha do half this stuff from the factory? It wouldn't cost them much. This bike will be mostly the same 10 years from now.
@@justincoats7236 because it takes the fun out of building your own…. The cost would be astronomical, & all other manufacturers would have to do the same…. Yamaha as a brand have always produced a very capable bike. It’s up to the owners to make it how they want it. 👍🏼. Also what Roland’s made will be similar to a Factory spec Motor. 👌🏼
wanna see these minizilla results!
I love to see him at work he's great to watch I'm finding out a lot thank you
Thanks Darrell, We have some more cool build videos coming soon. The next one is pretty special :)
this channel should be named: best content for 2 stroke lovers
this is amazing about to buy a 125 for next year to practice on for racing and wanted to get some factory parts for it and i now know what to get from this video thanks al ot lazer
Nice setup! Back when i ran a longrod kit on my 95 yz 250 we had to run a stock piston but longer rod, cyl spacer and 2 base gaskets. It was great in that bike.
Great video Max, you have us all hooked on the new mini yzilla project, what you're is awesome. God we would all love to have a friend like the genius Roland , can't wait for the next episode , Jesus max your smashing it.
Thanks Kevin
😍👌🏻looks the size of an 85,looking forward to seeing it go👍🏻
Definently would want to see the detailed talk about porting! maybe in a different separate video
Love it. Love all.the details. Would like to hear more as always. Such a great learning experience from Roland. Fascinating listening too him.
Thanks for watching Benny, wait until you see how well it goes on track... ;)
@@999lazer can't wait. Sounds lovely a crisp !! Looking forward to seeing the dyno numbers
sounds crisp
gold rims are on point max. nice work
Thanks Ian
Oh that sound 😍
Sounds so good! 🤓
Its beautiful
Cant wait to see the track vid, minizilla look and sounds insane 🔥🔥🔥🔥🔥🔥
Incredible video!! Roland is the man!!!!
I'm building my lambretta jet 200cc at the minute it's a 225cc kit being ported and stroked from a 58ml crank to a 62ml crank should b close on a 250cc once finished, different kettle of fish but I'm still on a 2stroke 😜👍
sounds awesome Andy, its going to be a crazy fast Lambretta!
@@999lazer hopefully with a 5 speed gearbox 90-100 mph😜👍
I could listen to that bike all day.
the old school theme is so sick! the first bike i ever had was a 1983 yz125, those gold rims are sweet!
Thanks for watching Corey! I'm so happy with how it turned out :-D
Great build
£610 Suter Mx Line clutch with diaphragm spring. @13.40 If you listen carefully there is some slight slippage(ha,ha) around the word 'instigates' about the clutch basket used, The Suter comes supplied with inner hub, but one has to use the stock outer basket? Is the carb a Lectron? Brake mean effective pressure is what he's trying to say @15.08
amazing bike mate and i cant wait to see it hit the track and rip some ruts
Not long to wait until you see that happen :) Thanks for watching
MAX great video! Would like to see you build a yz325 and a tuned yz250 then you’ll have a full fleet of these special Yamaha’s and then see what’s fastest around different types of tracks
That would be cool!
That's 1 cool looking bike. I'm sure it'll go as well as it looks. 😉👍
Thanks for watching. You wont have long to wait to see the first ride:)
Another interesting video lad well done.
Glad you enjoyed it
Fine looking machine
Nice Bike. Would love to see you and Roland compare a good old carburetor to the new school Lectron and Smart Carbs. Would be interesting to see how they affect the powerband and which one is the best. I bet Roland's carb tuning could beat anything else on the market but would be cool to see a track and dyno comparison.
Great suggestion! We'll see what we can do :)
Those carbs aren’t good for high level racers. No one ride with those in EMX125 or schoolboys1 in the US. Many people were putting Keihin carbs on KTM’s too as it’s better and easier to jet than Mikuni
Ya. I agree but it would be interesting to see how different the carbs act on a dyno/track.
Lectron and Smart carbs been around since the 80s they have always been trash 😂
He's a Two Stroke tuning God .
haha, I think he'll like that
Looks great
Thanks Tony
Very nice work😮
Thank you! Cheers!
Great vid Max, can you ask Roland does the heavier crank pin negate the need for a heavier flywheel ?
When can we look forward to the follow up video?
I love the Yamaha bikes
Are you feeling that's products in Yamaha, Kawasaki, KTM,Honda in special engine 2 stroke & 4 stroke?
Great work. Cool video
Thank you! Cheers!
Any chance you can release video where Roland is talking about porting in details? I would love listen to it
We'll ask him :)
@@999lazer lovely mate! :)
I’ve a mate that engineers 2 stroke engines like Roland and he did one of my Stihl chainsaws on the side. It’s absolutely unbelievable now I keep it as a show off saw 😂😂
Brilliant video. Very interesting.. especially the part about the cooling...as someone with a tuned 2005 Yz125cc can you tell me what fuel is being used as ive had problems with regular petrol and super unleaded with pitting my cylinder head 😀
Thanks for watching
Mugen Honda had a works bike you could buy many, many moons ago. It was a sub-200lb 125 with a full works Mugen engine, loaded with titanium with what was then works suspension. It was actually too light and exotic to run in US AMA Pro races because of the production rule- it was too light. It was also much more powerful than a stock CR.
Porting secrets are no secret to me- Ive been removing metal and reshaping ports for yesrs too..
Omg GREAT JOB GUYS
Thankyou
For my 04 kx250, as someone who has not too much mechanical experience, what are some basic things I could add or change to make my bike better?
T. O. B! Sounds great! Little zilla, Lill"Zilla, or LillaZilla... Minizilla ok..but LittleZilla better! I'm just bugging....but it is better 😄🍻✌🏻
I wonder what ever happened to Lazer Helmets in Belgium?
Funnily enough i used to wear Lazer helmets back when i was a kid, i loved the designs so much. That's actually where the 'Lazer' in 999lazer comes from!
Where did you get the crank/piston setup? And does Roland work on public bikes or is he private only?
Great vid, how do you think it would compare to the full GYTR kit?
Good question, we will see if we can do a comparison. Thanks for watching
I have a GYTR kit in the stores some where could be worth digging out to compare
On track it’s good but needs the 113mm rod to complete the package
I just wanna know something, does the tail prevent from splashing of water and mud while driving on the road???
i would really love to watch a full detailed documentary with an explanation of all available tuning options for 2 stroke bikes. Really loved to see how he turned this bike into a race machine. I have a 50ccm derbi senda myself and cranked it from stock (3PS) up to 25 PS with less than 500$ of parts. Tuning really is a great option especially for low ccm bikes. 🔥
Show us the Dyno with your 50 making 25ps.
Can you explain the stubby spark plug??
Heck ya we gotta see u build another big bike like the megalodon but more ccs
haha, keep watching. We have another big bore build underway. It wont be long until we release the first episode :)
Nice bike. I have a question, if you tumble the gearbox at 0-10 hours will it wear out faster when the bike is older?
no as it doesn't affect the gears in that way. My personal bike is a 2011 Y125 which had the gears "super polished" when it was new and it is still going strong.
My wife replaced me at night with a hand-held Tumbler. It's kind of suspicious she calls it "Roland". You got sum splaying to do Mr.!
Get back to working on that new ktm 125 next 😮
Good knowledgeable video..!!!
Es preciosa esa moto...saludos
Man I love seeing the wizard at work my question is are those radiators available for any brand 2 stroke and if so is there any information or link to get some
I believe so. You can get in touch with Roland via www.motocrossdirect.co.uk/
The y zed. Yz
Katie em. Ktm 🤣
Are you running the VHM GET ECU on the HCR tuned engine? What jetting is on the new HCR engine?
Strokin'
Great video! But in order to be the best 125 in the world… shouldn’t you work on the suspension and brakes too?
As long as it’s a Yamaha I’m in ✌️🇺🇸 she’s a rippa
What brand are the radiators?
Race Rads. You can contact Roland at www.motocrossdirect.co.uk/
Why can't Yamaha do half of these mods for the next year? They won't do anything. They should have 10 times the knowledge and engineers as Roland. It wouldn't cost them very much.
Hi max, any more info on the custom rads roland has in his hand and will they fit my 2020 yz125? Loving the project and in using allt of the same methods as roland to get my yz125 race bike ready👌👍
Hi Alex, Roland's company makes the rads. They are pretty trick and I have them on my own 2010 YZ 125 too. His contact details are on www.motocrossdirect.co.uk/
@@999lazer thankyou mate, keep up the good work👍
MX will die soon if you do not learn about who is destroying our world: Europa the last battle:www.bitchute.com/playlist/hmv3AI5oVvJm/
You Are Amalek: odysee.com/@Domerilo:0/You-Are-AMALEK-FinaL:d
The Greatest Story Never Told: odysee.com/@WhiteMeower:e/Adolf-Hitler---The-Greatest-Story-Never-Told-Original-English-Full-Version-HD-6h-32min:9
Hellstorm: odysee.com/@RenegadeBroadcasting:3/Hellstorm:36IS
IT SEQUITUR PART. 13 www.bitchute.com/video/KqDH3N66HTAi/
9/11 missing links: odysee.com/@TheJewWorldOrderExposed:d/9%E2%88%9511-Missing-Links:4
In the name of Zion: odysee.com/@languagebarrier:e/inthenameofzion:d
New world order communism by the back door: odysee.com/@Slammdcrxx:8/New-World-Order---Communism-By-The-Backdoor:a
Defiant: odysee.com/@Blackpilled:b/Black-Hate-Broadcast_1:d
The Kalergi Plan: odysee.com/@RightAboutEverything:8/Matthew-North-Kalergi-Plan-Documentary:8
HIDDEN HISTORY OF THE INCREDIBLY EVIL KHAZARIAN MAFIA odysee.com/@LaLibert%C3%A9:41/%E2%80%94_HIDDEN_HISTORY_OF_THE_INCREDIBLY_EVIL_KHAZARIAN_MAFIA_%E2%80%94:2
LESSONS OF HAITI BY DR. WILLIAM PIERCE: odysee.com/WLP-Haiti:d
media.gab.com/system/media_attachments/files/131/631/125/playable/a1394182f5614b43.mp4
Then go to goyimtv and get to work!
sounds nice Bud looks great what year is it 👌👌👌👌👌👌
its a 2023 YZ 125 Rumpel
@@999lazer love the white and red look amazing
Top 🇧🇷
Please share where the rads and hoses can be purchased. 7:02
Subbed
F*ck! You just did exactly what i wanted to do :/ but without big bore cylinder and some other parts
Roland only wants to help you grange hill tuning
Who sells those radiators
Can you guys do an electric water pump?
I show you the cake but not the recipe Oo
Q código de cilindro es
That guy was giving years of experience and you edited it out. Dafuq!
My 82 RM would embarrass the rider of that machine !
If your not building good crank case pressures on the down stroke your at nothing
1st
Put a 250 engine in it fastest 125... chassie lmao if your guna bore it out it aint a true 125 so might as well get a bigger engine on same light weight feeling frame
its not bored out its a legal 125 motor , but we did put a 500cc 2 stroke in a YZ 250 chassis th-cam.com/video/uEmwZHB_Xag/w-d-xo.html :)
@@999lazer yeah man, ive seen that its sick that bike is love the colours as well man excellent build
It isn’t bored out, nor is the stroke any different, it’s a longer rod to change the rod-ratio, and a shorter piston to retain the correct piston deck height.
@@mozer30 i thought thats what porting the barrel is technically boring it out but i dno i aint a mechanic lol
But it’s not a Honda how can it be the best lol looks good but
Whoever thought the color scheme ought to be yellow and red should be slapped...
The worlds best 125 is actually a bored out 125. Like a 134cc or even better, a 150cc. A ported and milled carb works too. Basically, its a cheater bike
Cylinder is just ported not bored out, still 125cc he says that in the video, not cheating
I used to love 125's then I turned twelve and have been able to get one that feels like I'm not completely wringing the guts out of them just to get one to go.
125CC 2 stroke i more fun...it's not gonna kill you :D