Poor man’s USB Rubber Ducky - 2 USD cheap USB Hacking Device based on Digispark ATTINY85

[ENABLE CAPTIONS!] In this video I am showing the cheapest "Rubber Ducky like device" that allows to create & run malicious scripts in Windows Powershell when connected to PC USB port. It is based on 2$ Digispark board ( ATTINY85 chip ) and programmed via Arduino IDE. I am showing the whole process in this tutorial from downloading necessary software to flashing ATTINY85.
The device can work as a Keylogger, Password stealer, Windows phisher , Security files dumper etc.. depending on your own creativity and windows powershell knowledge...
Basically it is recognized as USB keyboard device (HID) and this keyboard can generate some keystrokes with anormous speed ...
Payloads used are from this page : github.com/MTK...
Another nice example here : circuitdigest....
Arduino IDE installation & configuration tutorial : maker.pro/ardu...
If you liked the video please press the LIKE button & SUBSCRIBE button for more !
Thank You !
#ALCHNL #RUBBERDUCKY #HACKING

[@kunaca]

nice!

[@eniskzltoprak2881]

ı cant uploud test command,my attiny85 blink red light and ı get a please plug device error in app, how can ı fix that

[@justanengineer5599]

use different usb port, usb cable extender or even different PC

[@tylerwaltz3528]

I know I'm a bit late here but I did this and I'm having a problem. Once I have the digispark ready to go, I can plug it into the PC that I programmed it with and it runs fine. But I have plugged it into multiple USB slots on 4 other computers and it just says USB device not recognized. I've also tried other digisparks with different codes on them, Any ideas?

[@justanengineer5599]

Yes, some USB ports are having problems with Digispark units. Then sometimes usb cable extender helps. The issue with Digispark is that it really does not have a real USB it is only software emulated. I would suggest to buy Arduino Pro Beetle and make it like I did in my other video here th-cam.com/video/X2EN3GxAkhw/w-d-xo.html
The chip ATMEGA32U which is the core part of this Arduino has native USB support and works with every PC/smartphone for 100%

[@MymotheUeueueueu]

Hej Adam, a jak długi może być skrypt, bo owe urządzenie ma swoją określoną pamięć.

[@justanengineer5599]

Sam bootloader Arduino i biblioteka keyboard zajmują prawie 4KB. Wniosek ze skrypt moze mieć max jakieś 4KB bo chip ATTINY85 ma 8KB pamięci.

[@MymotheUeueueueu]

@@justanengineer5599 Ojj, to mało, jak mogę powiększyć pojemność, istnieje jakieś rozwiązanie?

[@MymotheUeueueueu]

Bo 4KB to około 4000 liter, racja?

[@justanengineer5599]

Tak 4KB to około 4 tysiące znaków. Jesli będziesz cierpliwy to za jakieś 2 miesiące będzie podobny film o tzw BadUSB. Aktualnie czekam na części z Chin. Tam będzie chip Atmega32u4 który ma 32KB pamięci. Poszukaj na aliexpress Arduino Pro Micro BEETLE, na bazie którego można zrobić lepszą wersję

[@MymotheUeueueueu]

To napisz proszę co kupić, to kupię i zrobię razem z tobą

[@koshbatfozaforza8327]

when i Reconnect digispark dosen't work why???? please help

[@justanengineer5599]

Sometimes it is related to USB port - you may try on different USB port. In my case I had to use USB extender cable to make it work correctly. This is a nature of Digispark - it doesn't have crystal clock onboard (XTAL) and internal RC clock generator in the chip is not so stable. Then it is unable to synchronize at correct speed with PC.

[@PowerProjects99]

niceeeeeeeee🤘💪💪