I’m assuming they meant to run your screw on the threaded end first and slide that coin to the opposite side that not threaded. Making the screw push the stem open.
@@bikelifegee It should, all my stems can receive the bolt backwards. The threads run all the way through. If not, you could run a tap through there to clean out the last bit.
That fast ripper is so 🧼 and 🔥
I had a '91 Ripper XL Serial # PK 1315, he's a racing wheelchair now :P
nice
Would you recommend monster quad,bigripper or fast ripper for learning to wheelie
Monster would be the easiest disc brake and 2.8 tire
@@bikelifegee ok thank you
@@bikelifegee what would be the best gear ratio for wheelies swerving combos and crusing and most the road being uphill
@@javiercobian6614 on a monster 36 18
@@bikelifegee ok thank you
I’m assuming they meant to run your screw on the threaded end first and slide that coin to the opposite side that not threaded. Making the screw push the stem open.
Didn't fit
Yeamon
Gee! Where did you find the white wall vees? Getting hard to find 😩
www.ebay.com/itm/155208778016?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GUvF4vqzS8K&sssrc=4429486&ssuid=dP8vRxjSTkS&var=&widget_ver=artemis&media=COPY
you that guy!@@bikelifegee Thanks G.
🔥💚🔥
LMAO, Put the bolt in from the other side!
Don't fit lmafao
@@bikelifegee It should, all my stems can receive the bolt backwards. The threads run all the way through. If not, you could run a tap through there to clean out the last bit.
@dksittingduck the hole is small don't fit
Your Faster Ripper stickers u wanted a leprechaun theme , how
About 4 leaf clovers 2 on each side
Noway Jose I don't decorate bikes like that🤣
SHOFIYAH 🤣
😝😝