Just to be sure, there's no problem with installing on the fixed side (34mm same with freewheel side) of a flip flop hub? There's excess threads because that's the lockring thread (30mm)? So you secured the rotor adapter with loctite?
Hey my rotor is rubbing on the BBR caliper adapter thing (the silver part). How do I stop it while also having the spacers on the rotor screws? I’m trying to completely eliminate rubbing. It’s my big flyer from SE.
i know this is a really old video and what not but bro... where did you get the part that mounts the rotor to the wheel that adapter... or what do i search to find it... been out of bikes for a long time just pulled my 2004 Redline Proline Pro 24" cruiser out of storage and was like i wanna start riding again... and my v brakes were missing so yeah lol
Instead of waiting for free tubes, get yuh a pair of Slime Super Thick self sealing tubes, and you will NEVER get a flat. What size washers did you use for spacers, homie?
Question. What size is the bracket that holds the brake caliper. I did this but the brake pads are sitting to high so it's obligated grabbing the edge of the disk
@@cdiddy8670 yes. I had to buy these brackets. www.amazon.com/dp/B08J6TR3QD/ref=cm_sw_r_cp_apa_glt_fabc_QYFP6XEBKSARCSE655KY?_encoding=UTF8&psc=1 So it can sit lower on the disc
@@hilariomartinez3982 one more question if you could help me out? On your rear axle after adding the caliper bracket did you remove any of the nuts or washers to make up the difference added? I have two nuts on each side of the hub, it fits a little snug didn’t know if I needed to remove one of the nuts for chain alignment. Thanks
does the center hole on disk play a big difference? the one you posted isnt availible any more and eny other disk i found is 44mm inner hole when the one you posted up is 48mm distence on center hole
Not following how is that frame adapter held without rotating when bakes are applied? There is another adapter being held with a bracket around the chain stay which makes sense but this one, do not see how is being held in place. Thanks.
My hub got a another cog threading on the end to attach would that work?? I got a big ripper rim and I need a smaller threading anyone know where I can find one
Lol at work yet got a few min in between pts. Awesome I know there was some place that offered adapters for SE Bikes a couple years ago. No idea if they’ll work on the Dingo yet I’ll talk to Cr to the local shop. Good viddy!!!
Anyone know which brake caliper mount works for this? I bought a mount for a rear mount tektro 160mm online but my pads are sitting way to high on the caliper.
Really helpful video bro! 4 years and still valid
@@half-ded3114 so glad bro 🤝💯
I have black ops rims but I don’t know if the pice that holds the router will fit
best one i have seen keep it up
Just to be sure, there's no problem with installing on the fixed side (34mm same with freewheel side) of a flip flop hub? There's excess threads because that's the lockring thread (30mm)? So you secured the rotor adapter with loctite?
yea
Yessssir!
Hey my rotor is rubbing on the BBR caliper adapter thing (the silver part). How do I stop it while also having the spacers on the rotor screws? I’m trying to completely eliminate rubbing. It’s my big flyer from SE.
i know this is a really old video and what not but bro... where did you get the part that mounts the rotor to the wheel that adapter... or what do i search to find it... been out of bikes for a long time just pulled my 2004 Redline Proline Pro 24" cruiser out of storage and was like i wanna start riding again... and my v brakes were missing so yeah lol
you can get the bikeberry bracket on Amazon for about same price
link???
i've been looking for it i can't find it
Maniacc Vybz look on box components website they have it
Oneway Myles box components has it
Got a link ?
This disc brake mounting works properly or not
HERO HERO yes lol. Or i wouldnt post it
You deserve 100k subscibers man i love the video
Do u have some extra parts cuz the don’t have them on the website u posted I’m in vegas too
Do you have to take it apart everytime you get a flat?
yes sir !!!
@@vegaspedalbloxx oh god
Jaden Gill its not for the lazy 😂😂
@@vegaspedalbloxx for real 😂😂
Instead of waiting for free tubes, get yuh a pair of Slime Super Thick self sealing tubes, and you will NEVER get a flat. What size washers did you use for spacers, homie?
2:49 where do i get this flange from?
I needed this video bro🔥🔥good looks
I don’t see the piece on Amazonis it sold out?
Question. What size is the bracket that holds the brake caliper. I did this but the brake pads are sitting to high so it's obligated grabbing the edge of the disk
Did you ever find the correct bracket? I’m doing the same build and I’m having the same issue.
@@cdiddy8670 yes. I had to buy these brackets.
www.amazon.com/dp/B08J6TR3QD/ref=cm_sw_r_cp_apa_glt_fabc_QYFP6XEBKSARCSE655KY?_encoding=UTF8&psc=1
So it can sit lower on the disc
Awesome thanks so much!! Huge help. How do you like the set up compared to v-brakes?
@@hilariomartinez3982 one more question if you could help me out? On your rear axle after adding the caliper bracket did you remove any of the nuts or washers to make up the difference added? I have two nuts on each side of the hub, it fits a little snug didn’t know if I needed to remove one of the nuts for chain alignment. Thanks
Is it compatible with the pegs on a SE Big Ripper?
I want to hear how it feels after a few weeks. Break them in and do a follow up bro. I’ve only ran cable/v brakes so I’m curious🤘
Will do
VegasPedalBloxx how do they feel so far?
@@vegaspedalbloxx So what do you think?
Nexus PL I Dm’ed him on instagram yesterday he said they held up great!
@@Wardwoodd Thanks man. So I will try it too. If so, I will share my thoughts here. ✌️
does the center hole on disk play a big difference? the one you posted isnt availible any more and eny other disk i found is 44mm inner hole when the one you posted up is 48mm distence on center hole
LOL "This" is the big spacer from your v brakes haha
Not following how is that frame adapter held without rotating when bakes are applied? There is another adapter being held with a bracket around the chain stay which makes sense but this one, do not see how is being held in place. Thanks.
theres a part of the bracket that sits in the rear drop out for the axle so its held in place
Would it work on a 2018 big ripper
All depends on the hub, if you have threads on the other side of the rear hub send it !!
Are you able to still run chain tensioners on both side still ?
Is it compatible with sebikes blocks flyer 26？
That a clean adapter set up!
Quick question how does the spacer look like for the actual disc mount
What if I don’t use thred locker?
may come loose
and if my hub does not have that place for the adapter?
Should work with se the big flyer and ripper have the threads for a second freewheel
Dillon Alvarez only gonna work with fixed gear threaded hubs, freewheel is different
It will work with a big flyer or big ripper as long as you have the stock rims
@@S550_Jalen it's a freewheel adapter
Bro how long is that axel
Where did u get that long ass axle?
Can the brake handle work on the right side too?
That’s where the sprocket is
Can you link some other hydros the one you linked is not available
My hub got a another cog threading on the end to attach would that work?? I got a big ripper rim and I need a smaller threading anyone know where I can find one
Do you know if this brake mount also works on mtb's?
Does this fit on a dblocks?
Great vid but I couldn't see both sides of the adapter, not sure if it would go on my frame :/
What break mount do you have ? Or do the break come with it ?
Can you get this done at a bike shop
What size is your axel ? Like how long is it to fit 2 legs cause mine was too short so I. Like only fit 1 peg
Same I could only fit 1 peg on my 2021 big ripper but my brother has a 2021 big ripper and both pegs fit
Lol at work yet got a few min in between pts. Awesome I know there was some place that offered adapters for SE Bikes a couple years ago. No idea if they’ll work on the Dingo yet I’ll talk to Cr
to the local shop. Good viddy!!!
Miguel Bizarre what is the place called
Appreciate the video bro needed to see this
can you plz help me with all the parts and stuff
What mm is the flange
Anyone know which brake caliper mount works for this? I bought a mount for a rear mount tektro 160mm online but my pads are sitting way to high on the caliper.
Hey, did the installation hold up well?
still to this day!
Anyone know where I can find the adapter?
Type the name of the adaptor in google
what adapter for the tekros
What size disc
Nice work man. I’d be proud of that!
Kool video man way to go !! U got it working lol bike berry it's cheaper there than anywhere else going put one on my bike
what hub do you have
I have been wanting to do this!!!
This goes hard!!!
Hey i know im like a year late but can i do this on a big flyer?
Yea
You da real mvp
Awesome bro!!
Hook this man with a tube sponsor!!!
Sounds legit
do you still use this
Ty for the tips bro!!!
What spacer kit
5:24- hardware stores have em
@@vegaspedalbloxx whats it called tho just that box?
@@reillylaing6048 spacers kit ? idk honestly haha my bad
@@vegaspedalbloxx nah its good bro ill try and find it thx tho for the fire vid😂
Aye homie. How’d this setup workout? Converting mines this week. Let me know your input. 🤙🏽
Does it work? Lit vid btw
Nice dude
My front wheel doesn't have the teeth to roll it
How bout on an big ripper
Tg3hunnit Cali Style Bullyz check that hub!
*Test ride?* 🤔😀
Big ripper works
Yes
Link?
will blocks work?
How much was the shipping?
Cheap
The gt heritage seirs
Try putting disc breaks on a bmx bike
Dude use a patch. I was fixing flats @ 9 yrs old.
Holy fuck
the video image is too poor, you need to fix it more
You need to click the setting and turn it up lol
Just buy tubes they are the cheapest thing u can buy
They add up😂😂
grifters or hookworms?
GRIFTERS!
Don't touch the discs with your hands
I clean them before riding 😇
🫡🫡🫡
Will this work ok a blocks flyer?
Any bike i thibk u just gotta have that threaded thing on the hub