Refinish Shellac French Polish Gibson Les Paul Studio
ฝัง
- เผยแพร่เมื่อ 10 มี.ค. 2022
- If you have any questions or messages, please feel free to comment.
I have repaired a Gibson Les Paul Studio.
We did refinishing, side scalloping, fret polishing, and overall adjustment.
The most difficult part was the refinishing. This refinish was neither lacquer nor polyurethane.
It is shellac paint, which does not use a spray gun or compressor.
We painted with French polish, which is one of the most time-consuming and labor-intensive methods.
However, to be precise, it is not a French polish finish paint, but a simple polished and polished? French polish.
At the work meeting stage, we were planning to polish only the top, and to use a thin shellac on the body back and other parts of the body, and finish with French polish.
During the process, we discussed with the customer and chose to polish.
You can see in the video how it is finished with French polish in the middle of the process. Polishing after finishing with French polish.
French polish is very difficult from the point of view of those who have experience in lacquer painting.
It looks like you are just twirling the pad while applying the polish, but to get a mirror finish, you need to know the density of the shellac, the amount of oil, the material of the pad, the drying time, and the repetition of polishing while applying the polish. In total, about 300 coats are applied, 6 hours a day for a week.
I dreamed that I was doing French polish, but in a failed state.
Flat boards and furniture without bumps are very easy to apply.
To be honest, I don't recommend applying shellac to anything other than body tops. The labor and cost are out of proportion.
However, I was fascinated by the unique film of Shellac French Polish.
I think it is because it is not a spray, so surface tension does not work, but the paint surface looks like it is stuck to the wooden surface of the body.
When I shine it in the light, guffaw! Gwah! Gwah! The paint film is called "Paint Film". It's hard to describe with a camera, so I'm not sure if it comes across...
I think this is the kind of surface that can be achieved because of the shellac French polish on the arch top. I think the price is high, but it is worth it.
When I see the finished product, I think I would like to do it again.
I will regret why I took such a request when I start working on it....
The highlight of this video is that I used masking tape instead of a scraper to express the binding in the staining of the body top material.
Perhaps.
Thank you for your request.
Parts and tools used
TONE Power Grip Driver Set PLPGD6
amzn.to/2Q5MrRr
Wera Craftform Diamond Screwdriver Set
amzn.to/3s2RoLu
VESSEL Precision Hex Screwdriver
Set, amzn.to/2O6hFoC
1.27(inch)amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal Polishing also Picard
amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite.com/andybassan...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ andy_bass_and_guitar
#gibson
#restoration
#asmr
#andy_bass_and_guitar - เพลง
The proper description of this video is "how to make a LP studio look 10x better" hehe
His video got 40k views but he only had 25k subscribers. Step up people. Dude does amazing work! 😎
If this video was as many hours long as it actually took you, I would still watch it all. Great job!
That video is going to be hard to watch.
Thank you!
Without watching the unedited full length feature, how many hours did it take you?
@@ericskinner7355 The entire process takes about three months.
@@Andybassguitar that is quite a commitment. I understand all the prep, sanding etc. Then there's the waiting for finnishes to cure enough to be top coated and polished. If that part gets rushed things can go really bad. Was curious about actual hrs spent on that guitar. Did you keep track of actual time spent in that three months?
@@ericskinner7355 The work time was not fully documented.
It took about 3 months from the time the customer sent me the guitar to the completion of the project.
The waiting time for drying would be about 2-3 weeks overall.
In the case of shellac, etc., the longer the drying wait, the better.
During the French polish process, I worked 6 hours a day for about 2 weeks.
Never gets old watching you work.
Thank you for this video. Sir, you are an artist!
As always Andy, fabulous work.
Amazing craftsmanship! Second to none!!
Amazing work!
One of the best! Great guitar spinner! Very handy!
i could watch your videos all day, so great🔥
Love watching your work.
Thank you!
Thank you Andy for another great video!
Thank you!
A master of craftsmanship at work.i love watching your videos man and keep up the good work.
夜中酒飲みながら見るの超至福。飾らないstudioがピンクに生まれ変わってまた違ったかっこよさあっていい。おつかれさまです。
ありがとうございます。
Fantastic work
Thank you!
Beautiful work!
Thank you!
Your works felt me the ART
Thank you！
Awesome job! I have an LP I need strip and refinish also! You have given me some really good tips! Thanks for the great information!
stunning finish
Thank you!
Extremely accurate work, excellent!👌🏼✨
Thank you!
The results are exceedingly satisfying and enjoyable!! 🙏
Thank you!
Really cool video. Great job!
Thank you!
Very satisfying to watch 😊
New viewer. Hands down my favorite video ever. I got lost in time!
Well done! Thank you for sharing all your hard work. Video editing is more work people don't see! Best Regards and Best Wishes!
Holy Christ! Beautiful Work Man!
Thank you!
So relaxing to watch. Thanks.
Thank you!
Amazing craftsmanship! I really admire taking care of details and your patience. As a home guitar tinkerer I am learning a lot. Thank you!
Absolutely amazing and fascinating to watch. You have a very special gift. I have a guitar I’ve always wanted refinishing I need to check you out dude. ✌️
Awesome work Andy, your the best 👌
Thank you!
Hi Andy ,
Everytime I watch your videos I am always totally amazed by your quality and skill tha you put into each and every job.
You must feel very proud with your workmanship in all of your projects ,keep up the great work ,it truly is magical..
Stay ell and keep safe m friend..
Respect to you from
New Zealand ✌
Thank you!
Great Job and great video.
Gorgeous
Nicely done! I throughly enjoyed watching your work.
Thank you!
Andy, your work is so beautiful!
Thank you!
Wow! Awesome job.
man I would love to do this for a living, I already work on basses and guitars but nothing to the extent you go to Andy, love the videos mate and the channel
Watching that poly finish peel off was very satisfying.
She turned out great! Thanks for the video.
Thank you!
Stunning Andy
Excellent job. To be honest I thing cream pickup rings and standard 50's knobs would fit so much better. Not a huge expense but huge effect.
It's a preference, but if it were me, I would make the escutcheon out of the same rose wood as the fretboard.
I like the black. Makes it pop. Cream always tends to blend in and make things look dull. I know it’s a classic look. But I prefer black plastics or stark white. I have a red Les Paul with stark white binding and I put stark white plastics on it. Looks killer. All my other Les Paul’s have black plastics. I prefer contrast. But like he said. It’s a preference. 😜
Beautiful work Andy 🙌
ありがとうございます。
いつも動画で勉強させていただいております。ありがとうございます。
I know it takes a loooooooooong time to do this. I have done a bunch of guitars. This is more like therapy when you do them.
Just amazing. I wish Gibson would make them this way. But that would mean all guitars would be 10K from them. I will never be able to afford my SG that I want. But such as life. Great work Andy.
Your level of detail work is just about 10 grades above mine. I am a very detailed orientated person, but you Sir have nailed it down to a science. I salute you.
Very nicely done!! I've never really seen this process done before. The way you pay attention to the finest detail is amazing. You sir are a pleasure to watch. Thank you for sharing.
Thank you!
As always you’re amazing this is a poem in wood, paint and lacka.
ありがとうございます。
Du bist ein Künstler. Absolute Perfektion!
Mahogany is so beautiful it hurts... Whenever I see a mahogany guitar that has been painted on, I feel like crying. BTW, this is such a wonderful and relaxing video ! I love the sounds and you really did this guitar justice. Your craftsmanship is amazing.
Great work! 🤘🏼
Man, you're a maestro🙏🏼👍🏻👍🏻😊
Nice ! I have an old EKO Colorado Parlor and that's a French Polished beauty.
Thank you!
Absolutely beautiful work, @Andy. That shellac looks beautiful. In the end, excellence requires payment in effort.
And the neck finish is perfect. Exactly what I would want for fast playing.
Finesse. Such finesse.
Great job Buddy, your attention to detail is impeccable. Never have I viewed a better restoration.
Bravo 👏👏👏
Thank you!
Great looking!
Some people get allergic reactions out of shellac.
So, if you get rash, it’s time to refinish!
man, you did so good on this guitar!
Thank you!
Good job not going to lie for a second there I thought Samuel L. Jackson was going to pop up reminds me of the movie The Red Violin 🎻. Beautiful work.
Thank you!
Amazing work. Pure genius. You should be proud of your skills. Its like a different guitar. I personally love every knick, scratch, ding, dent, and gouge on my 95 studio. It tells the story of its life and our times together. But if i ever wanted it to be fresh and new id ONLY use you.
Thank you!
Great job 👏
งานเนียบ!!จริงๆ🤘🏽
#งานดีทุกคลิป เลยค้าบบ FCจากชุมพร
I know how difficult and time consuming this can be. I have myself French polished several instruments, including an old vintage Strat (pitch black shellac) that had been previously stripped. Great job!! Contrary to common belief, shellac is extremely resistant and tough, yet extremely thin when applied properly.
Thank you!
This guys a mad guitar scientist
Hey Andy. I just discovered your channel when i was looking for finishing techniques for my own handmade guitars. You have inspired me to try french polishing with shellac. I know it will require huge patience but as i only build a few guitars a year it looks worthwhile for the results. Thanks for the amazing videos and inspiration.
Thank you!
Menajubkan hasilnya kawan
Finishing yang sangat indah 👍👍👍
Very nice work! Great to see in such detail. I have French polished several cheap guitars, essentially making silk purses of sow’s ears; all were bolt-ons. The best result, though not without flaws (unlike your work) was refinishing a small Teisco body and a great neck (really straight, even with fat frets!) in black lacquer over black Mohawk primer. The result is beautiful, especially on the neck. I think my problems arise from getting carried away with the lacquering process which is so sensually satisfying I get lost in it, and over-applied lacquer for a too-thick result. Too thick finish results in more flaws and problems.
French polish is a very forgiving finish technique, errors literally rub out in the next application. The feel of the finish is most rewarding, even more than the look. It’s like my little black guitar is a thick hunk of hard leather or a large black beetle. The lacquer is tough, takes a shine really well s much nicer than any plastic paint or even nitrocellulose spray lacquer finish. I think it’s stronger than the latter.
I love French Polish Shell Lac. Did that to my old Schecter Jeff Loomis 7 string. Applied some water base dye first.
Subscribed 😀
Thank you!
Nice work.
Thank you!
初めまして。
素晴らしいお仕事。プロの矜持を見ました。
バインディング処理の発想も柔軟ですね。これをやり遂げる技量も圧巻です。
I was not aware you could build up shellac to make it look like that. Beautiful work.
Thank you!
very nice,,,well done
Thank you!
beautiful finish is impressive😍🤩🎉🎊
Thank you!
Absolutely stunning end result well done you’re such a patient person … take that studio truss rod cover off that beautiful guitar and throw it as far away as you can … it’s not a studio anymore 😝❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Andyさんの動画はホント海外のコメント多いですね～今回のポリッシュは初耳で初めて知りました。気の遠くなる作業ですが仕上がりを見て納得です、見たことの無い塗装の仕上がりや出来上がった質感がこのGibsonの価値を一気に上げた様に思います。素晴らしい出来なので最後の映像に全体像(出来れば360°ゆっくり回転)等も入れて欲しかったな～
ありがとうございます。
全体像は撮影環境的に少しむずかしいですが、完成映像はもう少し丁寧に撮影できればいいな〜とは思っております。
キレイに撮れた！と思ったらそうでもなかった・・・っと今回なりました。
善処します！
Awesome work! It would be great to see the finished guitar in natural lighting at the end.
I love your videos. They are so quiet and peaceful ! Love from Israel 🇮🇱
I thought it was very pretty to begin with !! You did an amazing job totally redoing the finish ..and I am not that fond of the color choice but the finish is glass like and you did an amazing job !!!
Thank you!
Beautiful ❤️
Thank you!
Dude ......nice. very very nice
Magnifique !
Merci !
いつの間にか海外ファンがすごい増えてる・・！
今回も素晴らしい動画でした。
レスポールスタジオは廉価版という扱いだとは思うのですが、ここまで手をかけてもらったら楽器も本望でしょうね。
That mahogany is beautiful
Lindo trabalho a guitarra ficou maravilhosa
🎸👏🏻👏🏻👏🏻👏🏻
wow, you coated the hell outta that body--- great job son, like a mirror
I've French polished two guitars so far. It's a very fragile finish, but I love it. It has almost zero thickness.
It is not a tough paint, but it is a good paint.
Your work is simply spectacular and wonderful. Only Japanese discipline would do it with such precision, love and dedication.
Sorry for any mistakes as I don't know how to speak English, I use Google translator 🤣🤣🤣🤣🇧🇷🇧🇷🇧🇷🇧🇷
ありがとうございます。
素晴らしい！
この仕上げ 以前に動画にあげてましたねぇ
大変な作業になる様で‥
しっとりとした感じで 落ち着きますね
ありがとうございます。
かなり、かなり大変でした。
しっとりはすごく的を得た表現です！そんな感じになりました。
Having refinished a Strat body (not nearly as much work as yours was) I can totally appreciate the effort that went into your project. The color isn't my cup of tea (too PRS for me) but you do outstanding work. Who knew that beautiful top was hiding under that Studio finish?
this color is my cup of tea :)
Amazing detailed work. Consider using a workshop vacuum instead of air compressor to blow the wood dust, better for your health long term and cleaner air in the workshop.
Thst looks great.
Thank you!
holy cow. want you to redo my studio. love it
Thank you!
impressive
Thank you!
このギター素敵すぎる！！羨ましい！！
昔みたいに完成の全体像が見たいと思う今日この頃
ありがとうございます。
色々と工夫中です。
Thank you for sharing. Shellac can make such a beautiful finish. Have you seen Gilboys TH-cam channel? The guy is a master at french polishing. I still have to sand in order to flatten the finish, but he is able to manipulate the polishing process without sanding. Anyway, your attention to detail makes me feel like flub-dub. Great work!
Thank you very much.
I did not know that person.
I will watch it later!
Very nice maple top
Thank you！
I'm interested in how that neck feels with those shaved edges. I've seen scalloped necks before but not this. Fantastic work, your craftsmanship is such a high caliber.
I actually French polished a custom cut wooden scratchplate. Rationale was not necessarily that it would look great, but that scratches and dings could be polished out again easily as a renewable process.
Very time consuming and didn't look anywhere near as good as this beautiful piece (didn't need to - it's a player so would get messed up from playing anyway) but I think it's a viable option still.
That said, I spent months French polishing a bookcase once. I find it quite relaxing.
French polish is hard work.
Tanpa melewatkan satu detik pun👌
Tangki kamu
Bravissimo.
Grazie!
very, very nice!
Thank you!
Man I wish I could send my les paul studio to japan for u to work on, so I would never thirst for a custom shop gibson ever again..
Thank you!
初めて動画を拝見させていただきました。感動しました。いつかじぶんのギターもお世話になりたいと思います。