Making a pure and correct Stratocaster wiring
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- If you have any questions or messages, please feel free to comment.
I modified the threaded holes in the body for Stratocaster wiring fabrication and pickguard installation.
Properly centered and pickguard mounted.
I worked on the wiring with less solder in my ideal guitar industry and with a heat level that did not degrade the solder.
Beautiful wiring is difficult.
Thank you for your request.
Parts and tools used
TONE Power Grip Driver Set PLPGD6
amzn.to/2Q5MrRr
Wera Craftform Diamond Screwdriver Set
amzn.to/3s2RoLu
VESSEL Precision Hex Screwdriver
Set, amzn.to/2O6hFoC
1.27(inch)amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal Polishing also Picard
amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ adachi_andy_koki
#restoration
#asmr
#andy_bass_and_guitar
オススメに出てきて…
凄く綺麗で丁寧な仕上げで思わず見惚れちゃいました…
素敵❤
I love how precise and meticulous your work process is. You are a true craftsman.
Thank you!
Meticulous is a perfect use of a word. Perfection is what I would add.
Best guitar soldering job I've seen from guitar youtubers.
I just want to thank you for this amazing video. I am going to be rewiring a Strat soon and will use this video as a tutorial. Again, many many thanks for this and all your videos.
One of the absolute best Yotube channels, love your work!
いつ拝見しても素晴らしい!
ありがとうございます!
凄く丁寧な仕事されていますね!ちゃんと道具も揃っている👍
ありがとうございます。
Amazing work as always, Andy!! Learned a bunch of new things watching you work. Thanks for sharing your knowledge and experiences with us!!
Very similar to my workstyle. I have also very similar tools.
5/5 from a profesisonal for your craftsmanship . Solid solder joints, nice wire work.
The final product looks absolutly great. Very nice to see that.
清く正しいシリーズにして続けて欲しいです……
む、むずかしい事をおっしゃる・・・笑
正義と正しさは人によって違うので、すごく怖いですが、やってみましょうか・・・
@@Andybassguitar
お願いしたいです……!
ですが、テレキャスターあたりは色々横槍を入れる人が多そうで怖いですね……笑
Hi there! You're a super neat Luthier.
はんだ付けはものすごい綺麗!!!
tokai ですか
ありがとうございます。
いつか自分のギターもお願いしてみたいなぁ。
うれしい。
Неплохая работа. Но я бы свил провода от звукоснимателей и вместо изоляционной ленты закрепил бы провода пластиковыми хомутами. И паяльник нужен помощнее ,мощный паяльник делает это быстрее и не даёт перегреваться резисторам .
I missed you andy!
Thank you!
Sorry for the slow frequency of video uploads!
Anyone else feel like a hack after watching Andy work?
Perfekt👍👍👍
Thank you!
Incredible work.
Liked the use of hand tools .
May i ask where you got the locking pliers in 10:44 ?
That's what I'd like to know
@JimmyKay1976
Already sourced it ,
Goot heat clip H2SL or H1
@@ranius7388 Same here. Just ordered. Can't wait
I got all excited thinking you were about to put some time into a mid-50s Fender, then I saw MJT in the neck pocket!!! Those guys make some beautifully convincing relics. Great work as always, Andy - loved those "jewels" of solder beads you so deftly created. I'd bring every one of my guitars to you without hesitation! 🙏
Thank you!
MJT is a well-known manufacturer.
I did not know that.
Why not put together every ground?
is that a paste wax you're using on the finger board?
オリジナルの蜜蝋ワックスです。
Good afternoon! Are these good potentiometers? Where to buy (give a link). Thank you. Health!!!
jp.rs-online.com/web/p/potentiometers/4897555
I recommend a potentiometer from Tokyo Cosmos.
I think it is the best quality in the world.
I have my preferences, though.
Bro! Amazing picture! What camera you used?
Thank you!
The camera is an Olympus OM-D EM5M2.
@@Andybassguitar beautiful picture. what lens is it?
@@dom.mp3 M.ZUIKO
Also why are you running a shield plate but still wiring the pots together that eliminates the need for that.
あのアルミのテープを信じてはいけません。
アースを配線しなくても問題はないかもしれませんが、導電性も悪いですし、音や保険の意味でもアースを配線する事は非常に重要です。
I don't even know what that says and there is no way to translate it.
是你起了中文标题还是TH-cam自动给我翻译的啊
我已经在一个翻译网站上翻译了它。
如果翻译中存在任何奇怪的地方,我们很想知道
if you saw my soldering joints you would have a seizure
Loads of totally unnecessary poncing about for the scratch plate holes.
Good job but I just watched the most pointless stuff at the beginning with that pickguard lol. You plugged the holes then pretty much drilled them right back in the same spots lol. Installing a pickguard isn't rocket science but you just made it that. Put your neck on then bridge and line up your pickguard and drill lol.
No kidding.
I didn’t get why he used that chamfer tool on the body, like the head of the screw would sit there, but then put the pick guard on… what does the chamfer do? Am I missing something I should know?
The bevel is to stop the finish cracking and lifting when you put a screw into a freshly drilled hole. I guessing he plugged the holes because they had been enlarged over the years and that’s why the fresh ones where drilled more or less in the same spot.
@jimir68 I think he just did it cause it wasn't lined up correctly enough for him really cause that's why he is working a mathematical problem marking everything and putting it back on there lol. It could have been but I think that's not an old body so I don't see the screw hoke being blown out unless someone changed pickguards a bunch on it maybe. The finish will still check off that screw hole no matter what but I believe it's a relic anyway so I don't see the point in that really but I see what your saying
0:01
もうこの時点でラッカーボディの良い音してる…
PGビス1本からホント丁寧ですね
レリックボディは塗装を薄く出来るので、響きを抑制されていない感じしますよね。
よく鳴る好きなギターでした。ただ、ビンテージとはちょっと違う鳴りかな。とも思いました。
What an honour it would be to have my guitars upgraded by your work!
Thank you!
🤣🤣🤦♂️
What did you use on the fretboard? It looks different than what you've given in the link. Thank you!
Nice work! What is that tool you used to clamp those wires on the potentiometer and capacitor?
Absolutely amazing work. Would you ever consider making an in depth tutorial on wiring like this?
ピックガードの穴が元々ズレてるってことあるのですねぇ
Gootの放熱クリップをポットのハンダ付けに使うの、自分も真似してみます!
違うメーカーのボディに違うピックガードとかだと、ほぼ修正が必要ですね。
ヒートクリップはおすすめです。
The wiring restores my faith in humanity.
音のないシーンも音が聞こえる不思議。(脳内再生)
目の保養だぁ、自分もこんな風に出来たらなぁ笑
Excelente trabajo amigo!!!!!
El Pickguard es metalizado en su parte interior?
En ese caso es necesario conectar las masas entre potenciómetros y llaves?
Felicitaciones.
He counter sinks the screw holes.. even though there's a pickguard goin on top.. this is just nonsense for the camera. People on here think he's some kind of master now 😂😂
例えば0.5㍉ネジ穴がずれていたら僕はネジ穴を開け直します。
また、インチネジのネジ穴にミリネジを入れたりすることは絶対にしません。
時間をかけた分だけ恩恵が有るのです。それがあなたに取って有意義であるかの問題ですね。コメントありがとうございます。
Am I the only one blowing on solder while watching the video? -)
Just stumbled upon your channel. I enjoying watching quality workmanship! It's nice to see someone have pride in their work in this day and age!
絶対に完璧なはんだ付けスキル。尊敬する。
3rd fret probs need more work otherwise really good . Try using more protection . Just a tip Andy
ハンダは何をお使いでしょうか?
ちなみに、鉛フリーでしょうか?ビンテージ であれば、時代に合わせて有鉛でしょうか?
普通に売っているケスター44です。無鉛ですね。
有鉛があれば有鉛を使いますが、継続的に手に入らないものはあまり使いたくありませんね。
お客様からのご指定があれば別ですが。
This is so therapeutic to watch. Great stuff & workmanship!
ありがとうございます。
Can you add a link to the wiring diagram? I think I know what it is but I am not 100% sure.
A Mark Jennings (mjtele) body. Those are some of the best reliced ones.
@@witchell8976 You get what you pay for 😉
It was a very ringing body.
I see you use a heat sink for the pot lugs but not on the capacitor.
Also you do use metal clamps for the spring claw which act as a heat sink, is there a reason you do it this way?
lovely neat job 👌
I have a '56 Custom Shop relic. I have swapped in and out various pickups. Right now, I have it back to the original CS pickups. Having seen the video, now I want to rewire it to make it neat and clean like this what Andy has done in this video. Inspiring to say the least!
ああ〜、、、、、🥲🥲🥲もうこれ大好き過ぎて無限に見れますはんだしてるときの音めっっっっちゃ落ち着きますね、、、🥲
ありがとうございます。
This guy turns a 10 minute job into a 2 hour job, fitting a pickguard 😂😂😂
А на корпус надо провод? Или только на бридж?
I hope you charge a premium for your work cause my lord the attention to detail is astonishing!
Once again Andy, great work and a pleasure to watch!
Thank you!
Hello there can i ask about the pot u used on volume and tone
What is on volume (A or B) and also on the tone (A or B)?
At the end what u put on the fret board? Is it wax? And what kind of wax that is?
Please answer
Thank you🙏
Very good video! Your soldering is the best I have seen while searching for guitar wiring. You bundle the wires so they aren't flopping around and you make your actual soldering very neat.
Pure art!, your works are amazing dude...
P.D.: What soldering iron are you using?
The soldering iron is HAKKO FX600A.
amzn.to/3MKgicj
Thanks!
まるで名医のオペを見ているようだ
素晴らしい手さばきかっこいいです🤩
カメラワークナイスです🤗👍🙆🙆♂🙆♀
Your soldering skills are incredible... And camera too.
How wonderful is this?
I'm a practical guy and likes to do stuff that needs doing.
Electrics though are beyond my comprehension other than basic maintenance.
I watch this and applaud the skill and knowledge, yet at the same time have no clue as to whatsoever is happening.
I hope to upload an explanatory video at some point.
@@Andybassguitar thanks for the reply. That'll be something to look forward to.
What brand are those small handy clamps you use when soldering?
Thank you!
@@Andybassguitar ??
Sorry, I made a mistake.
The clip is a goot heat clip.
amzn.to/3Mbn627
自分でも素人配線してますが、これはなんとも美しい うん美しいとしか言い様がない
Excellent work and attention to detail verging on overkill. A good thing you don't work on production but however your soldering and wire positioning is top notch. I personally would have done a common ground.
It looks like a surgery. Nice job.
ありがとうございます。
So satisfying i wonder what capacitor did he use for that strat
强迫症表示极度舒适 差点睡着了 堪比ASMR
Thank you!
Tedious and no voiceover to explain it at all.
日本語で喋っていいの?
celle qui sonne le mieux des 3 que vous avez fait il y avait du bois et des planche a cette époque chez CBS
I have a MJT telecaster custom in gold and a MJT ash strart in natural, two the best guitars ive ever heard or played
This has been incredibly relaxing. Thanks!
Всмысле правильной? Может это переведено криво и имелось в виду оригинальной, тк распайки "правильной" для всех не существует
丁寧で綺麗な配線ですね!良い仕事です!
ありがとうございます!
竹串削ってるところで無意識にふっ!吹いちゃったw
いつもながら丁寧で美しい仕事ですね^^
ありがとうございます。
That's A+ work. Thanks for idea of iron clamps which holds wire together. How much money you get for this job(if it not a secret ofc)? What's in that jar, for fingerboard? Looks tasty
Thank you!
Prices are secret.
The fretboard is coated with beeswax wax.
Did anyone else blow on that first solder joint at 8:24? :0 ss
Wow, such a meticulous work!
Thank you!
Isn't that strat extra thin?
And now the guitar is sounding better?
ポット裏へのハンダ付け苦戦しがちなので、とても参考になります!
メッキされていないポット裏のハンダはやり方を覚えると戦えます!
Потенциометр громкости нужно было дальше убрать от струн.
ポットの1とケースをダイレクトにせずわざわざワイヤリングするとは。なんか利点あるのかな?
ポットの端子を曲げてケース?カバーにはんだ付けすると、ほんの少しですが端子とカバーが密着せずにハンダで埋めたような状態になるのです。
配線で繋ぐことによって、接点は増えますが、端子とカバーに配線を密着させて繋ぐことができます。
ハンダは抵抗なので、イメージとしてハンダで電気を通してはいけないのです。接着剤みたいなイメージというか、極限までハンダは少なくて、だけど配線が外れないように。という考えで配線しています。あと熱によるハンダの劣化を少なくするとかですね。
Tidy work m8
Thank you!
@@Andybassguitar I'm just learning how to solder pots at the minute and I have been watching your videos for some time now, and I can honestly say you make it look easy haha keep the videos coming Andy
Love your work Andy! Also love the lighting, angles, and camera work!
ありがとうございます。
Top work. You obviously know your craft!
Wow what a beauty job. Just one question, connect the barrel of the tone and the volume with a wire it's not reduntant? You already have the connection from the shielding of the pickguard. Just a question not a judgement.
Shield tape on the pickguard is not enough.
If the pot comes loose, the ground will be disconnected.
This is true for many Fender guitars, but it is sad that there is no ground wire.
@@Andybassguitar thank you for the answer.
Great
Thank you!
Me encantan tus videos
Thank you!
ノミの切れ味すげー
hola que prolijidad,, que valor recomendas para el capacitador del tono? mucho gracias
I think anything is fine.
Preference.
スプリングの5本張りはオーナーさんの趣味ですか?
だと思います。
パーツはお持ち込みなので!
Wtf?
fine art
that's one lovely guitar. Love the way the finish checked naturally. Also that's some stunning work to wire up a strat. huge lessons learnt
При пайке удерживать пинцетом удобнее за оплетку, а не луженый провод. Паяльником пинцет не нужно нагревать
Извините, я не понял ваш комментарий.
Job Well Done !
ありがとうございます。
How hot was the soldering iron?
350℃くらいです。
Wonderful work ...what material you use for fingerboard ? Thanks
Thank you!
I think it is a rose fretboard.
@@Andybassguitar i talk cream that you use for the fingerboard thanks
@@marcomagnoni7341 It is the original beeswax wax.
@@Andybassguitar thanks
Чем вы полируете и чистите палисандровую накладку?
Иногда используется апельсиновое масло, но для увлажнения применяется пчелиный воск.
你是中国人吗?为何都是中文?
I am Japanese.
Because I want Chinese people to watch the video.