How to Replace Front Driver Side Lower Control Arm with Ball Joint 2002-2007 Chevrolet Trailblazer
ฝัง
- เผยแพร่เมื่อ 11 ธ.ค. 2023
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ib/1ASLF00421
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2002-2007 Chevrolet Trailblazer. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• Pry Bar 1aau.to/o2M/1AXAA00020
• 15mm Wrench 1aau.to/o5h/1AXAA00010
• 21mm wrench
• 15mm Socket 1aau.to/obMP/1AXAA00015
• 18mm Socket 1aau.to/oatq/1AXAA00043
• 19mm Socket 1aau.to/oatq/1AXAA00043
• 21mm Socket 1aau.to/oatq/1AXAA00043
• 22mm Socket 1aau.to/oqs/1AXAA00266
• 36mm Socket 1aau.to/ocI/1AAST00006
• 7mm Socket 1aau.to/obrq/1AXAA00017
• Brake Caliper Hanger 1aau.to/okD/1AXAA00439
• Pickle Fork
• 1/2 Inch Ratchet 1aau.to/oatq/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/obrq/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obMP/1AXAA00015
• Torque Wrench 1aau.to/oaUR/1AXAA00044
• Gloves 1aau.to/oaAK/1AXSS00048
• Safety Glasses
• 10mm Hex Socket
• 7mm Allen Wrench 1aau.to/ocZ/1AXAA00007
• Floor Jack 1aau.to/oaiY/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o7d/1AXAA00065
• Pole Jack
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Concise tutorial, no bull and no skipping the hard parts. Very well done.
This video was posted just in time for me to fix up my moms Trailblazer! Much appreciated.
THIS!, This is an absolutely great video my man. I just discovered that mine needs to be replaced As well , While there are quite a few pretty good video's out there, yours is on a different level.
WHAT ABOUT THE BACKING PLATE?
was going to say tools required would be nice but its all listed in the description.
How did you diagnose this? I ask because I have an annoying pop noise when driving in and out of the garage and it is getting worse. My mechanic tightened a number of suspension parts and everything thing has been replaced at least once with 318k miles. The mechanic said everything is fine but a couple years ago there was a noise that no one could diagnose a Lincoln dealer discovered a cracked tranny mount. Thank you.
How do yk once you’ve gotten it into ride height position
Can bad shocks cause eyhe ride height to sit lower than normal?