Think we need to see a Nissan Skyline R34 GtiR next,one of my favorite cars from the late 90s and in that blue colour,superb work,keep em coming bro I thoroughly enjoy watching them being made by skilled model maker
Another beautiful build. Well done. What strikes me is the idea that we have a piece of resin where nothing opens and a chassis with no suspension and it's called a full detail kit
Hi, nice color choice! It seems to me that this time for the clear 2K SNP you used a 0.3 airbrush without cap instead of a 0.5? Which solution did you have the best results with? Are 2/3 wet coats necessary or the first light one? Do you think that the high temperature of 30 degrees can ruin the work of the clearcoat? Thank you.
First I have to tank you so much for your following. 🥰 For your question 1.Yes, I try to use 0.3 nozzle with 4:1 2K clear coat in this time. And I discovered that it gave different results. 0.3 make your paint layer thinner. It look more than realistic in scale but it has orange peel effect when it fully cure so I have to sand it of before compounding. 2. I’m always applied 2 layer for 2K clear coat. Mist coat for the first an then wet coat for the second continuously. 3.I think it shouldn't have any effect. The temperature in my work area is above 30 degrees most of the time.
@@OMGscaleworks I tried 2K 4:1 with Iwata Eclipse 0.35 and Iwata Revolution CR 0.5. With the first one it came out smoother, no build-up in the corners, but a bit of orange peel and reflections that were not as clear as a mirror. With 0.5 more mirror, but too thick in the corners. To consider my personal mistakes while painting. However in general better than with other 2K for modeling.
Beautiful work, man! That has to be one of the coolest resin (non-3D printed) that I've ever seen. Seriously, to the level of an injection molded one. Very cool!
Amazing work as usual Oni. I see you showing us dry fitting the finish mesh pieces and many other pieces. I would love to see how and where you apply your glue and what product you use. It would be easy to ruin a beautiful job. Thank you!😊
Its 4am and im baking a cake. I started at 6pm and im about to loose my mind because i need to wake up at 8! I dont know how this is relevant and i dont care. Great video thou
OMG STRIKES AGAIN !
Wow, JUST W O W!😊
Glad you like it! Thank you so much Lloyd.☺️
YES!!! THE GOD OF DIECASTS HAS BLESED US WITH ANOTHER UPLOAD ONCE MORE!!!!
Think we need to see a Nissan Skyline R34 GtiR next,one of my favorite cars from the late 90s and in that blue colour,superb work,keep em coming bro I thoroughly enjoy watching them being made by skilled model maker
I’ll will think about it. Thanks for your suggestion mate. 😊
Another beautiful build. Well done. What strikes me is the idea that we have a piece of resin where nothing opens and a chassis with no suspension and it's called a full detail kit
Thanks for your comment! 😊 Yeah I agree with you, I think they have to called “Full resin kit” instead.
Your decal application is exceptional, especially the carbon engine cover!!
Thank you very much Mark! 😊 Actualy the carbon decal on enging cover not came from the kit, it’s from Hobby Mio.
@@OMGscaleworks Pleasure!
Incredible piece of art.
Thank you so much bro! 🥰
That is another work of art bro,don’t know how you do it but that there is a skill
Thanks for sharing
Love and peace from Ireland
Very thanks to you from Thailand 😍
Hi,
nice color choice! It seems to me that this time for the clear 2K SNP you used a 0.3 airbrush without cap instead of a 0.5? Which solution did you have the best results with? Are 2/3 wet coats necessary or the first light one?
Do you think that the high temperature of 30 degrees can ruin the work of the clearcoat?
Thank you.
First I have to tank you so much for your following. 🥰
For your question
1.Yes, I try to use 0.3 nozzle with 4:1 2K clear coat in this time. And I discovered that it gave different results. 0.3 make your paint layer thinner. It look more than realistic in scale but it has orange peel effect when it fully cure so I have to sand it of before compounding.
2. I’m always applied 2 layer for 2K clear coat. Mist coat for the first an then wet coat for the second continuously.
3.I think it shouldn't have any effect. The temperature in my work area is above 30 degrees most of the time.
@@OMGscaleworks I tried 2K 4:1 with Iwata Eclipse 0.35 and Iwata Revolution CR 0.5. With the first one it came out smoother, no build-up in the corners, but a bit of orange peel and reflections that were not as clear as a mirror. With 0.5 more mirror, but too thick in the corners. To consider my personal mistakes while painting. However in general better than with other 2K for modeling.
Love these kits just to pricey for me
Yes I think so! But I compare the price with die cast like AutoArt, so it seemed acceptable.
Very nice build. Italian car.
Thanks so much 🥰
Awesome work as always!
Thanks again!
Love the color 🎉💎
Nice work
Thanks for your supporting 🥰
Beautiful work, man! That has to be one of the coolest resin (non-3D printed) that I've ever seen. Seriously, to the level of an injection molded one.
Very cool!
Thanks a lot sir! 😊
Congrats to another masterpiece! 👍👏
Thanks a lot! 😊
what a beautiful model !!!!!
Thanks!!! Glad you like it 😍
Beautiful kit and build 😊
I appreciate your comments. ❤️❤️❤️
สวยมากครับ ไม่ทราบว่าใช้กาวอะไรติดPEที่ทำสีแล้ว กับกระจกในช่วงท้ายครับ ไม่มีคราบกาวเลย👍
ผมใช้กาวติดเล็บแต้มเอาครับ ใช้ดีมากครับ
@@OMGscaleworks ขอบคุณมากครับ😁
Amazing work as usual Oni.
I see you showing us dry fitting the finish mesh pieces and many other pieces. I would love to see how and where you apply your glue and what product you use. It would be easy to ruin a beautiful job.
Thank you!😊
Thanks, I will try to show that in a future video. 😉
Bravo!
😍
Looks cool. 👍
Thanks man! 😊
ชอบงานติดดีคอลมากเลยครับ สวยๆ😀😀
ขอบคุณมากครับ ดีคอลค่ายนี้ทำดี แต่คันนี้ติดยากเอาการอยู่ แต่สุดท้ายก็รอดมาได้ครับ 555+
สวยงามครับบบบ
ขอบคุณหลายๆเด้อครับ 😁
Hi what’s the glue you use to dab on the models also where you get the dabbling tool you use.regards Glynn
The glue is low fogging CA glue and the tool is round head sculpting tool.
มาช้าแต่มานะ อิอิ🥰🥰🥰🥰🥰
น่ารักที่สุด สิ่งเดียวที่ปลอบใจจากการที่ช่วงนี้ยอดวิวน้อย ก็คือคอมเมนต์จาก fc นี่ล่ะฮะ 🥹
Its 4am and im baking a cake.
I started at 6pm and im about to loose my mind because i need to wake up at 8!
I dont know how this is relevant and i dont care.
Great video thou
Thank you for watching. And I hope you wake up in time. 😁
🎉🎉🎉
😍😍😍
Engine is box stock???
Yeah, it came from the box.
@@OMGscaleworks I love alpha model 😍
@@OMGscaleworks btw what glue do you use for the photo etch attaching to plastic?
Can i get smp in the u.s?
They can ship worldwide, try to contact Mr.Ake imixclubonline@gmail.com
🎉🎉🎉❤❤❤