Thank you so much for this video. I was still having problems with my nozzle after I sanded it down, but I also flooded my nozzle with WD-40, and it fixed the issue for me. It seems I have to re-do the lubricant every now and then, but it's amazing how much of a difference it makes. It's like I have an entirely new pressure washer.
Dude, 1 min & 43 seconds. Straight to the point and your instructions were spot on. Thank you for taking the time to post this. You have no idea how much headache you saved me today.
my man, you saved me money wit this simple tip. this thing cost $70 where i came from and had i know that is fixable i would've saved me some heart aches. thank you
Worked sporadically after following your instructions. Could be the green machine model is contributing to the problem. Will try spraying it down as another suggested.
There is another issue with this nozzle that isn’t fixable. The small, metal ring/seal in the tip can blow out. Check for that first by looking at the tip, it should be visible, usually brass. If it is missing, game over.
Good information I’ve learned something and I appreciate you not taking 30 minutes to tell us you made a good video
Thank you so much for this video. I was still having problems with my nozzle after I sanded it down, but I also flooded my nozzle with WD-40, and it fixed the issue for me. It seems I have to re-do the lubricant every now and then, but it's amazing how much of a difference it makes. It's like I have an entirely new pressure washer.
Dude, 1 min & 43 seconds. Straight to the point and your instructions were spot on. Thank you for taking the time to post this. You have no idea how much headache you saved me today.
my man, you saved me money wit this simple tip. this thing cost $70 where i came from and had i know that is fixable i would've saved me some heart aches. thank you
I spray lubricant in mine Wd 40 with lithium .. works like a charm
I just did, didn’t have any sandpaper on hand
@@Spinalcell did you open it up
This guy was right on. Thank u for taking the time to make this video.
Thank you very much!
Briefly and clearly!
Thank you, will try it out, mine has been doing one single straight line sometimes And other times it works perfectly
Exactly what I needed to do. Thanks
Thanks for making this look easy
Worked sporadically after following your instructions. Could be the green machine model is contributing to the problem. Will try spraying it down as another suggested.
awesome! Thank you!!!
Worked.
thank u sir, for tips and trick
There is another issue with this nozzle that isn’t fixable. The small, metal ring/seal in the tip can blow out. Check for that first by looking at the tip, it should be visible, usually brass. If it is missing, game over.
Just about to but a new jet wash for £99. Will try this tomorrow thanks
i tried this and it still wont spin. I actually did it twice. any other ideas? It's on a DeWalt 2100psi 1.2gpm electric pw.
wut if the dang thing won't open?
what if u can't unscrew the quick connect metal part from the plastic housing??...
Did this multiple times and the mf continues to get stuck and cause the pressure washer (electric) to surge. Any idea before I buy another?
I saw quite a few on Amazon between 15 and $35.00.