ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

WPL C24 KIT portal axle run.

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ก.พ. 2022
  • Here we go. The front axles need a bit more running in they are a little bindy. Hope you guys enjoy this run. With a better esc this setup might be pretty good for the slow stuff.
    The Official WPL website:
    www.wpl-rc.com...
    RunThatRc Instagram Page:
    / runthatrc
    Run That Rc Crew Facebook group:
    / 152058613514995
    Run That Rc Clips Channel:
    / @runthatrcclips8753
    #RunThatRC #WPL #PortalAxles

ความคิดเห็น • 50

  • @JamesDirtRC
    @JamesDirtRC หลายเดือนก่อน +1

    Hahaha 2 years ago. You Rock. I just had to remove my Portal Axles. Rear is Binding up on one side an slipping. And the Diff gears bind when pushed in while turning. But turn fine when pulled out. anyways i installed the Straight stock C24-1 Axles back on and with the 370 metal tranny it is Amazing. Got some speed back an still crawl.

  • @Andrew_Red
    @Andrew_Red 2 ปีที่แล้ว +4

    Cool vid. I'm surprised the portals survived the tumbles. Mine cracked by just cruising but I fixed them with the metal C hubs and put bearings instead of the original bushings. Nice music selection by the way 😁

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      I expected them to break as well. I think I can fix these plastic hubs and hopefully they hold up.

  • @IowaBudgetRCBashers
    @IowaBudgetRCBashers 2 ปีที่แล้ว +2

    Man I can’t wait to get mine built. All the parts I ordered should be here in a day or so.

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      have fun! It gets addictive how many ways you can go at modding these.

    • @IowaBudgetRCBashers
      @IowaBudgetRCBashers 2 ปีที่แล้ว

      @@RunThatRC RC is an addiction period lol. My wife hates it but loves it at the same time because it binds me and my son. He now wants to build one too, or mod one. I’m thinking about getting him one of the rtr version for 35 bucks and letting him do the upgrades himself. It’s good clean fun 😁

  • @joshherrman3201
    @joshherrman3201 2 ปีที่แล้ว +1

    Thanks for the update

  • @SevenWelt
    @SevenWelt 2 ปีที่แล้ว +2

    Nice off-road run and crawling!👍

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      Glad you enjoyed

  • @scalecrawlnl
    @scalecrawlnl 2 ปีที่แล้ว +1

    Great climbing effort, many cool shots of the truck✌

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      Glad you enjoyed it.

  • @wrc_adventurehobby5242
    @wrc_adventurehobby5242 2 ปีที่แล้ว +1

    Nice friend😍👍👍

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      Thank you! Cheers!

  • @eReSRCCar
    @eReSRCCar 2 ปีที่แล้ว +1

    Cool run and great car 👍👍

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      Glad you enjoyed it

  • @PythonScratcher
    @PythonScratcher 2 ปีที่แล้ว +1

    Nice ground clearance

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      portals definitely gets it off the ground.

  • @gtrf25rc
    @gtrf25rc 2 ปีที่แล้ว +2

    Niceee wpl c24, i like👍😊

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      It's a fun truck to mess with for sure. I enjoy these little rigs.

    • @gtrf25rc
      @gtrf25rc 2 ปีที่แล้ว

      @@RunThatRC Yes, it's true, its appearance makes the truck more cool and dashing 😊👍

  • @kellykuretich6366
    @kellykuretich6366 2 ปีที่แล้ว +2

    😁😁👍👍

  • @Fonzierc
    @Fonzierc 2 ปีที่แล้ว +1

    Nice 👍 looks great but personally I'm convinced there are that good

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      If your a tinkerer they are a great little rig to mess with for sure. Not the best for sure but also very fun and makes you think to get the most out of them.

    • @Fonzierc
      @Fonzierc 2 ปีที่แล้ว

      @@RunThatRC the rig yes but not the portal's

  • @Jim-jx6xs
    @Jim-jx6xs 2 ปีที่แล้ว +2

    What motor is in that rig? Awesome camera work.👌

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      The WPL 2 speed gearbox and motor. Thanks for stopping by!

  • @pecandurc
    @pecandurc 2 ปีที่แล้ว +1

    Nice 👍🏻

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      Thank you! Cheers!

  • @kalaikauai808
    @kalaikauai808 2 ปีที่แล้ว +1

    This thing is sick! 😍🔥👌
    I just got my c24-1 in and looking for upgrades already lol 😆
    What brands and sources do you recommend for cheap beginner upgrades?

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      Check out my channel. I have tons of different mod videos on these little WPLs.

  • @gb25jr
    @gb25jr ปีที่แล้ว +1

    Just got my first c14 for christmas...after all of your time with the trucks is it possible you could make a list of upgrade parts I would wanna use. I would appreciate it a ton man.

    • @RunThatRC
      @RunThatRC  ปีที่แล้ว +1

      I always recommend a KM kit version as it has everything I use in my builds and if you can swing a 1060 esc and tx/rx it will make the 2 speed run well.

    • @gb25jr
      @gb25jr ปีที่แล้ว

      @@RunThatRC I went with the 1060 esc and the knock off dumborc on Amazon has great reviews will see.

    • @chrish9502
      @chrish9502 ปีที่แล้ว

      @@gb25jr hey how did this end up going? Thinking about going with a 1060 and then ordering a dumborc or flysky

    • @gb25jr
      @gb25jr ปีที่แล้ว

      @@chrish9502 1080 is what you want everything else went great

    • @chrish9502
      @chrish9502 ปีที่แล้ว

      @@gb25jr How much better is the 1080? I’m pretty new to this

  • @Dikov_DH
    @Dikov_DH 2 ปีที่แล้ว

    Can you show how to swap forward and reverse on the wpl and mn madels. I bout a 370 motor nad install it but the forward and reverse are swap pls help

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      if you dont have a programmable transmitter to reverse the throttle channel you will either need to flip axles or flip the motor wires around to get the proper motor direction you need.

  • @bubblesrcshed
    @bubblesrcshed 2 ปีที่แล้ว +1

    Do you have a c24 with a more capable motor for trails or you always run this little motor ?
    I’ve always been curious if one of these could hang with the big boys if they had more power ?

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      I have one that just has the 2 speed setup with a better esc and it handles its own. These can do some cool crawling but will not hang with a 10th scale only because its smaller. I have climbed some stuff I didn't expect to make it up and it does.
      These axles slow down this rig too much. They shouldn't have made the axle gear ratio so low so it doesn't loose more speed. Would have been better without gear reduction imo.

  • @Jim-jx6xs
    @Jim-jx6xs 2 ปีที่แล้ว +2

    Have you seen the metal portal axles on Ali express and Banggood.😃

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว

      I have heard of them never looked them up. I'm probably going to repair these and see how that goes before I ditch the hubs for metal ones.

    • @Jim-jx6xs
      @Jim-jx6xs 2 ปีที่แล้ว

      @@RunThatRC
      These are complete metal axles not just the metal hubs, I’ve ordered a set .😀

    • @MrJimbobdudeguy
      @MrJimbobdudeguy 2 ปีที่แล้ว +1

      are those for 1\10 scale or wpl 1\16? i havent seen metal versions for smaller vehicles but wider stance has given me ideas...

    • @Jim-jx6xs
      @Jim-jx6xs 2 ปีที่แล้ว +1

      @@MrJimbobdudeguy
      Yeah they fit WPL and MN d90/99.

  • @brcoutlook1482
    @brcoutlook1482 2 ปีที่แล้ว +1

    Looks and runs well mate 👍 what wheel tyre combo you have on it David??

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      its actually 3d printed wheels. Method style wheels and the tires are wpl kit tires with lugs cut off to make it look like a mud tire.

    • @brcoutlook1482
      @brcoutlook1482 2 ปีที่แล้ว

      @@RunThatRC they look so good...I really need to get a 3d printer and learn how to use it....missing out on some great looking wheels that ppl have designed

  • @chilebaggs
    @chilebaggs 2 ปีที่แล้ว +1

    Is this truck lifted?

    • @RunThatRC
      @RunThatRC  2 ปีที่แล้ว +1

      The portal axles give it a lift.