How To Install A Williamsburg Butcher Block Countertop DIY Guide Step By Step With Pro Results

In this video we will show you How To Install A Williamsburg Butcher Block Countertop DIY Guide Step By Step With Pro Results
Visit Our Amazon Storefront Here👇🏽:
www.amazon.com/shop/hazlotumi...
Recording Gear Used In This Video👇🏽:
iPhone 12 Pro Max: amzn.to/3s9Y7FU
DJI OM 4 - Handheld 3-Axis Smartphone Gimbal Stabilizer: amzn.to/3DYGv1T
RODE Wireless Go II: amzn.to/3E0Ijaq
Shure MV88 Portable iOS Microphone: amzn.to/3IWCiQ6
Ring Clamp Adapter for DJI OM4: amzn.to/33nWlq4
Extension Rod for Gimbal: amzn.to/3sh8J5w
Portable Charger 36800mAh, Power Bank: amzn.to/3pXhRK1
Monsdle Travel Laptop Backpack Anti Theft: amzn.to/3yvOkLl
🔔 Subscribe for more TH-cam videos: / @frankshandymanservice
Chapters:
0:00 - Intro
1:00 - Countertop That We Will Be Using
1:53 - Glue & Wood Screws That We Will Be Using
2:18 - Removing Interior Plywood
3:03 - Beginning To Install Countertop
4:00 - Measuring & Attaching Countertop to the Framing
5:18 - Installing the Second Section of Countertop
5:46 - We Had to Sand Before Installing Second Section
7:13 - Installing the Third Section of Countertop
7:56 - Final Results of How To Install A Williamsburg Butcher Block Countertop
Music: Voyage
Musician: @iksonmusic
#HowToInstallButcherBlockCountertop
#FrankTheHandyman
#DoitYourselfInConstruction
#TheHandyman
We do handyman work and repairs in the Portland Oregon and Vancouver Washinton. We will beat any reasonable written estimates. The Frank's Handyman team will be happy to assist you with any project such as Tile, Flooring, Baseboard, Trim, Interior Paint, Exterior Paint, Installing Doors, Handyman Repair, Instal Toilet, Instal Ceiling Fan & Ceiling Lights, Decks Repairs, Deck Painting, Installing Wooden Steps, Deck Sealing, Fence Sealing, Storage Construction, Electrical Work, Plumbing, Shower Remodel, Landscaping, Maintenance, Roofing, Drywall Repair, y much more...
Frank's Handyman Service, Your best experience
--------------------------------
Our Services
--------------------------------
Tile Work, Flooring, Baseboard, Trim, Interior Paint, Exterior Paint, Installing Doors, Handyman Repair, Instal Toilet, Instal Ceiling Fan & Ceiling Lights, Decks Repairs, Deck Painting, Installing Wooden Steps, Deck Sealing, Fence Sealing, Storage Construction, Electrical Work, Plumbing, Shower Remodel, Landscaping, Maintenance, Roofing, Drywall Repair, y much more...
--------------------------------
Service Area
--------------------------------
Portland, Beaverton, Tigard, Lake Oswego, West Linn, Hillsboro, Aloha, Forest Grove, Sherwood, Milwaukie, Gladstone, Molalla, Gresham, Happy Valley, Newberg, Estacada
Damascus, Woodburn, Wilsonville, Scappoose, Troutdale, Fairview, Washington County, Multnomah County, Clackamas County
--------------------------------
Follow us on:
Facebook: / frankhandymanservice
Website: frankhandymanservice.com/
Safety:
Due to factors beyond the control of Frank The Handyman - Do It Yourself, I cannot guarantee against improper use or unauthorized modifications of this information. Frank The Handyman - Do It Yourself assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. This video is for informational purposes, use this information at your own risk. Frank The Handyman - Do It Yourself recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Frank The Handyman - Do It Yourself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Frank The Handyman - Do It Yourself.
Disclaimer:
Some of the links mentioned in the description are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help support this TH-cam channel and allows me to continue to make videos for you. Thank you for your support!

[@nickradan1977]

Loved this...It looks gfreat, I hope you show more of what you're doing on the inside of the Bar. Nice Work Guy's!!!

[@SoulTouchathePoet]

Loving this. I'm thinking about building one in my basement

[@hectorromero6455]

Great project, too many ideas 💡 thanks ☺️

[@DerekTJ]

Inspirational. Hi from 🇮🇪

[@mikebeagley1454]

Great work. One thing to note when using butcher block for the top: some slabs come with a beveled edge to protect it from chipping. This means if you plan to butt to pieces together perpendicularly (like in this video), you'll need to rip the edge to get a super clean 90 degree edge. It looks like the Williamsburg brand used in this video did not have a beveled edge. Great work, you could barely see the 'seam'.

[@charlescharalambous1433]

Beautiful result. the only thing that does not seem right is the end grain showing different where you joined the butcher block. you could get a seamless finish with a 45 degree miter cut , but that would make things more complicated.

[@buk6708]

I installed a cojntertop in Williams burg Brooklyn today. $1500 for 3 6'x39 slabs. I made $300 installing it after splitting with crew. 6 easy hours.

[@MMann-bs8wf]

Just fyi....should use a biscuit joiner for the joined edges and run all of the grain in the same direction...it will look a lot better...

[@alejandrogomez3272]

I'm here looking for some advice on the overhang of the composed countert top. I also need an 12in overhang that runs longways (the direction of the grain). I only have 8in brackets to support it which lives 4in of overhang that it is not supported. I'm worried if it is going to break since must of the way is going to pulling down from that edge. From the video it doesn't seem that you put any brackets. Is there a reason why? Did you add them later? Thanks for posting this video

[@Born2be76]

Joints were not screwed together. And the end should overhang about two inches.

[@kuntanelson9019]

How much in material

[@albertesparza-jk6qe]

you should have secured the butcher block joints with screws via pocket holes. This counter will cup over time without those pocket holes. Also you should 45* your 90*. Should have added supports to the 12” overhang.

[@davidsilva6830]

I was thinking the exact same thing you beat me to the punch though.

[@andylingle6646]

How do you line up the wood lines on a 45* cut?

[@swalclaws]

@@andylingle6646 miter and use a biscuit joiner

[@mattman7773]

They suggest to do the corners the way he did too many variables in the wood cupping, boards not lining up etc. plus you have a lot of expensive waste and if your cut is off just a little bit on the 45 it will look terrible

[@user-oy7sw4rk3m]

No electrical need outlets