Haters are gonna hate. They use the anonymity of the internet to feel superior and elite. Like they're secretly accomplishing some sort of prolific goal by degrading other peoples actions and success. Yet when faced with bettering their own life they have no drive to actually succeed and generally live in a world where everything and everyone is against them.
Love the video, great setup! I did not notice any where how to connect 2 sets of break lights (BAG BLADES + FILLER PANEL LIGHTS) to 1 OEM connector. I am assuming once one of the light sets is connected to OEM housing how can the other set of lights also be connected? Is there an adapter sold separately to allow multiple light sets to be connected to 1 OEM wiring harness?
Looking good! My amazon cap like yours leaked bad... ! I had to leave about a liter out when refueling because it would go over and of course run down the side of the tank ...
I pretty much have the same ciro setup on my 16 ultra limited ... everything works fine except for when I take the tour pack off. Signals blink normal but the dash indicator does the hyper flash thing ... you have the same issue ?
7:45 when HArley designed int hose holes they said "check it out.. This a good place to have them put some more money in it!". First time I saw the back of those I was like...that's creating a market guys! lol
Dude! Looking good. I have one question that I can't see the answer to in the videos. Did you powder coat the front turn signals or replace them? They feel metalic but they aren't magnetic so I am wondering if they can be powder coated. Love the series. I have a 17 RGS with a tour pak and other upgrades. Decided after watching your video that I can go blacker than I thought I was comfortable and that powder coating is the way to go.
@@MrKeneal0330 Thanks for the reply. Love the channel and Between 2 Wheels. Road Glide love! Wish you guys weren't 2k miles away. Would love to share the road with you.
Just have to tap the turn signal wire from the bag lights into the turn signal wires on the bike. Very simple if you've got rudimentary wiring skills. Give it a go!
I know I'm late to the game but your front break problem you think it could have been from the powder coating on the lever, just throwing my thoughts in the hat.
I love your content, yet while my experience is with off road and motocross. So mostly engine work. With my own bikes I've dealt with same work. I have 20 years of experience with my dad's in 40 added with 20 before. I may not of worked on one before but the uncertainty doesn't help. I like you but the second guessing is constant. I'd love more confidence, but super dave had that. I also ride a sportster. Very modded. Mostly engine work, but some visibly.
So does the whole premiere thing help with views, because it messes me up. I see the premiere thinking it’s a video and go from happy to sad. Then I see the video in my feed and think “didn’t I already watch that”. Lol. Keep up the good work though. Can’t wait to see the bars.
It does seem to help quite a bit. I dont think YT has done everything correctly for the points you just made, but it's still a new feature so we'll see how it evolves.
Hey is there a way to contact you through email or something I have a question you took something off that I plan on taking off and I cannot find torque specs for that part if you could help me I would really appreciate it
@@BikeNBird Thats what ill have to do!!.....Ypu should also check put a company called @gaugemodz you can send him ypur guages and he will do them in all red leds...and the radio..that would look sick!!
Yeah it doesn't look good where the build is right now but, if you go back and watch the first video and see what he wants the finished product to look like it will match the bike. I think he said he was going to wrap the bike.
How can people give a video a thumbs-down when it hasn't started yet? Dicks.
Because this is the internet lol
@@BikeNBird bastages
Haters are gonna hate. They use the anonymity of the internet to feel superior and elite. Like they're secretly accomplishing some sort of prolific goal by degrading other peoples actions and success. Yet when faced with bettering their own life they have no drive to actually succeed and generally live in a world where everything and everyone is against them.
Do the wrap! It will make the bike look so much better!
with the turn signals being backwards the battle donkey is now a cross eyed mule. I jest. starting to come together very nicely
Keep 'em coming!
was not sure I would like the lights in the rear but I do. cool.
that lil bit of red is bad ass w gray. looks good bro... can't wait to see what u do next 🇺🇸🇺🇸🤘
Man ! Uncle Ken shrank ! When I’m done watching TH-cam I’m going to go make a donation to feed the children .
He's down over 100lbs I believe!
Thanks. I'm down 150lbs.
Nice video! Do you know how the Ciro compare to the Custom Dynamics for brightness?
Love the video, great setup! I did not notice any where how to connect 2 sets of break lights (BAG BLADES + FILLER PANEL LIGHTS) to 1 OEM connector. I am assuming once one of the light sets is connected to OEM housing how can the other set of lights also be connected? Is there an adapter sold separately to allow multiple light sets to be connected to 1 OEM wiring harness?
What color is your bike? It would be nice to see it in the sunlight after the install. I am interested in the filler lights myself.
Looking good! My amazon cap like yours leaked bad... ! I had to leave about a liter out when refueling because it would go over and of course run down the side of the tank ...
Yeah I took it off. It was leaking even when the bike was only 1/4 full
Ooh, the suspense...
Your gonna like these !
Hey Justin what’s the name of the new dash and gas cap you used where did you find it
I pretty much have the same ciro setup on my 16 ultra limited ... everything works fine except for when I take the tour pack off. Signals blink normal but the dash indicator does the hyper flash thing ... you have the same issue ?
I’ll rock a sticker on the dyna, lemme kno when they are available
Justin said to put it in the comments so here we go. Put the stickers in the store, I'll buy like 5.
7:45 when HArley designed int hose holes they said "check it out.. This a good place to have them put some more money in it!". First time I saw the back of those I was like...that's creating a market guys! lol
The bike is looking good. Are you going to do the Lucky Dave’s bars? Maybe even a Lucky Dave’s seat.
No and no. This bike isnt being built as a performance bagger. Just a badass touring machine.
Bad ass shirt
Lookin sick. Needs moons mc black tail light.
Got one coming that's better than that 😏
Dude! Looking good. I have one question that I can't see the answer to in the videos. Did you powder coat the front turn signals or replace them? They feel metalic but they aren't magnetic so I am wondering if they can be powder coated. Love the series. I have a 17 RGS with a tour pak and other upgrades. Decided after watching your video that I can go blacker than I thought I was comfortable and that powder coating is the way to go.
They were indeed powdercoated.
@@MrKeneal0330 Thanks for the reply. Love the channel and Between 2 Wheels. Road Glide love! Wish you guys weren't 2k miles away. Would love to share the road with you.
@@astoriacop Thanks for the support!
My buddies refer to my bike as the millennium falcon with all those lights installed
Would this work on a softail? Plug and play sandlebag lights?
Hey man the rear bag tail light how do you intergrate turn singal whit it
Just have to tap the turn signal wire from the bag lights into the turn signal wires on the bike. Very simple if you've got rudimentary wiring skills. Give it a go!
FRICKIN' LASERS
I need some freekin' sharks with laser beams...
Did the Sportster build series get finished? I looked but didn’t see if it was.
He sold his sportster for the ultra.
what bike lift do you use?
Redlinestands.com
I know I'm late to the game but your front break problem you think it could have been from the powder coating on the lever, just throwing my thoughts in the hat.
You don't have to wait until you hit 1k to do stage 1. My bike went from stock to stage 4 with 6 miles on it.
I know you dont HAVE to, but when I do my stage one I'm also opening the motor up to send pieces to powdercoat. That's the main reason I'm waiting.
Ok, good deal. Looking nice. You are killing me with having to wait for the next video. It is like watching a series of cliffhangers. Lol
Dat beat doe
I love your content, yet while my experience is with off road and motocross. So mostly engine work. With my own bikes I've dealt with same work. I have 20 years of experience with my dad's in 40 added with 20 before. I may not of worked on one before but the uncertainty doesn't help. I like you but the second guessing is constant. I'd love more confidence, but super dave had that. I also ride a sportster. Very modded. Mostly engine work, but some visibly.
I also come from a motocross background. I've got a total of 2.5 years working on road bikes. The confidence comes with time.
What's the name of the color on the Ultra?
Industrial grey
Old man Grey lol.
Do you read your comments?
Nope.
So does the whole premiere thing help with views, because it messes me up. I see the premiere thinking it’s a video and go from happy to sad. Then I see the video in my feed and think “didn’t I already watch that”. Lol. Keep up the good work though. Can’t wait to see the bars.
It does seem to help quite a bit. I dont think YT has done everything correctly for the points you just made, but it's still a new feature so we'll see how it evolves.
I ...must...know...this...tune's....name. 11:31
Gonna get you - By: Chamelian Glade
Thank you Andrew!
Heya fella great video, loving the build so far, I was wondering if the giveaway is for U.S only???
Nope, as long as Get Lowered can ship to you.
Hey is there a way to contact you through email or something I have a question you took something off that I plan on taking off and I cannot find torque specs for that part if you could help me I would really appreciate it
How did you paint the chrome rings around the gauges red??
With paint 😂
But in all seriousness, they're just plastic. Scuff and paint. That simple.
@@BikeNBird Thats what ill have to do!!.....Ypu should also check put a company called @gaugemodz you can send him ypur guages and he will do them in all red leds...and the radio..that would look sick!!
That is the stupidest ignition they could have come up with. I've had the same trouble with mine.
Great video and you made me think of vetstylecustoms.com check them to make your build battle ready. I did !
This color combination doesn't match at all
It's also not finished.
I agree, looks real tacky. Makes the bike look cheap.
@@MrKeneal0330 its pretty much all the way there, it just doesent work for me, couldve done something better with the same effort
Its. Not. Finished.
Those red accents look real tacky
Kinda like you.
Yeah it doesn't look good where the build is right now but, if you go back and watch the first video and see what he wants the finished product to look like it will match the bike. I think he said he was going to wrap the bike.