Torque values from the warn winch service manual: the two motor retention bolts 5-7 ft lbs. For the Allen bolts on the freespool clutch the manual doesn’t specify a torque. I called warn customer service and was told the Allen bolts are “hand tight”.
Warn winches are designed to be “clocked”, or rotated, so the motor terminals and the clutch lever will be positioned properly. The purpose is to keep the winch “foot” (takes the load of the pull) positioned for maximum strength. The default position is set for the most common applications. Applied to an ARB bumper, the winch needs to be clocked so the foot bolts to the bumper, the clutch can be accessed and the terminals won’t arc off the surrounding sheet metal. 👍
Torque values from the warn winch service manual: the two motor retention bolts 5-7 ft lbs. For the Allen bolts on the freespool clutch the manual doesn’t specify a torque. I called warn customer service and was told the Allen bolts are “hand tight”.
Ted Stefani I found them to be torqued around 45 inch pounds
Next time you make a video please add the torque specifications for re tightening the bolts & fastners.
Where did you get that bracket that let you have centered holes for the fairlead?
Where can you purchase the control pack bracket shown in this video. I called ARB and they didn’t know what I was talking about.
Thank you.
Looks like you have to contact ARB Directly. I also need one.
Is the EVO VR series not compatible with ARB bumper?
Wait.... What?
What size bolt, how many and what grade bolt was used for the bumper mount?
That likely depends on the make and model of the vehicle. It sounds like the bumpers are vehicle specific.
So the winch was attach at the bullbar not on mounting
Where do I get the ARB control pack bracket?
Contact ARB directly.
Why all the adjustment before installing. sorry. newbie. don't know hardly anything jeeps
tom martin it's because the lever needs to be adjusted for the ARB bumper for easier access
Warn winches are designed to be “clocked”, or rotated, so the motor terminals and the clutch lever will be positioned properly. The purpose is to keep the winch “foot” (takes the load of the pull) positioned for maximum strength.
The default position is set for the most common applications. Applied to an ARB bumper, the winch needs to be clocked so the foot bolts to the bumper, the clutch can be accessed and the terminals won’t arc off the surrounding sheet metal.
👍