Great demo. To ensure the ends don’t come loose you can pull the tag all the way through so that the loop end and tag end exit at the same point, then tie those into a small square knot, then trim.
Been doing this for years also. I learned from a video of Mark from Rivendell doing it. At least I think it was him. Anyway, it’s been a while since I’ve seen a demo, thanks for the refresh. The further you move the camera back, the more I can se what’s on the display wall behind you, lol. Gotta come visit!
I like using a waxed twine. It locks itself into place and it's somewhat weatherproof. I've never used shellac on tape, so it might cause some trouble there.
Cool video, Chris. I will definitely need to use this if I change out my handlebar as I have been contemplating. Don't sweat the different cameras; I didn't notice a quality difference. I was focused on the wrap. Now I can tell my sisters and cousins that I know something they don't: how to finish cloth handlebar tape with hemp twine. 🤗
Nice demo. Thanks for taking the time to demystify this finishing method. You are right, a little practice and it's a pretty simple process. Hope you have a great one!! ✌🏼, Rob
Thanks for the demonstration. I look forward to your "Monday Micro Dose" offerings. I remember learning this technique in Boy Scouts (a long time ago) to finish the end of a rope to keep it from unraveling. BTW, I was in SW FL at the end of January and hoping to visit your shop, but it just didn't work out. Next time!
Very intriguing! Never knew twine on the handlebars was a thing!! Looks…cool! C’mon people, hit the 👍 and subscribe !!! We gotta keep him from doing an “Everesting” episode.
It was/is(?) still a TH-cam trend amongst the road cycling crowd. Cyclists from all over TH-cam’s ’reach were attempting to “climb” Everest by doing the total feet of the summit as a timed event. It caught on, strangely enough, with the elite cyclist community that gave it additional momentum. I think some did it as a means to attract viewers…which I thought was a mistake. How do you maintain that level of viewer expectation?!! (See Phil Gaimon’s efforts on his TH-cam channels for reference). In my opinion it’s a jump-the-shark-tank move for content creators. Similar to the comely-girl-in-a-bikini move. Not sustainable…unless if you’re Heidi Klum. A trap for those desperately in need of content. I don’t think you have that problem…but if you do AND you’re really desperate for more eyes, watch Gaimon’s prepping for Everesting videos. It’s a hoot!
A timely video for me. I adopted a neglected Rivendell Hunqapillar that has the original tape, twine, and cork on the bars. I will be stripping it down to the frame and rebuilding it from there (no paint needed). I already have the tape, grips and twine, but question of how to re-twine the bars has been on my mind. Can you recommend a specific brand of shellac? Thanks…
Bullseye. Most home stores have it. Foam brushes. I’ve tried to use expensive shellac brushes but it’s a pain keeping them good. The little foam brushes cost less than a dollar. Wrap it in a plastic bag if the job is going to take more than a day. Pitch it when you’re done.
I’m considering using cotton bar tape/ shellac method on my drive side chain stay as a chain stay protector. Green cloth, clear shellac finished with hemp twine to match the handlebar. Is this something that is recommended. Thanks for the video.
Thanks for the helpful video...twine comes in different sizes...which is preferable for this? maybe 2 mm? I can see if it is too small, it might break.
I never looked at the size-if there was one. I just bought hemp twine from a crafts store. Newbaums also sells a kit with, to my eyes, the same size twine. Have fun twining!
Yeah, the stuff you get in the ball really varies. Some sections will be really thin, and others really fat. Once it’s all together-and especially if you shellac it-it’s not really noticeable. To me anyway.
You are one classy son of a gun. Never even thought of this. So simple yet nice touch.
Great demo. To ensure the ends don’t come loose you can pull the tag all the way through so that the loop end and tag end exit at the same point, then tie those into a small square knot, then trim.
Been doing this for years also. I learned from a video of Mark from Rivendell doing it. At least I think it was him. Anyway, it’s been a while since I’ve seen a demo, thanks for the refresh. The further you move the camera back, the more I can se what’s on the display wall behind you, lol. Gotta come visit!
Yep. That was Mark. I learned from that video too! I look forward to your visit.
You have 1000 subscribers! One milestone achieved.
Hi great idea I really dislike the tape at the end of the wrap . Off to the craft store so I can play with my parts bin gravel bike again !
I like using a waxed twine. It locks itself into place and it's somewhat weatherproof. I've never used shellac on tape, so it might cause some trouble there.
Waxed twine. Huh. Interesting. Never thought of that.
Cool video, Chris. I will definitely need to use this if I change out my handlebar as I have been contemplating. Don't sweat the different cameras; I didn't notice a quality difference. I was focused on the wrap. Now I can tell my sisters and cousins that I know something they don't: how to finish cloth handlebar tape with hemp twine. 🤗
Outstanding!
100% will do this next time - Thanks!
Well done (and subscribed)! I always put the “tag end” underneath the bar so it’s not so visible.
Appreciate that!
Nice demo. Thanks for taking the time to demystify this finishing method. You are right, a little practice and it's a pretty simple process. Hope you have a great one!! ✌🏼, Rob
Thank you Rob
Congratulations on 1000 subscribers and great video! Was that the bridge club?
The bike in the video? No. It was my LHT with the Clydesdale fork.
Thanks for the demonstration. I look forward to your "Monday Micro Dose" offerings. I remember learning this technique in Boy Scouts (a long time ago) to finish the end of a rope to keep it from unraveling. BTW, I was in SW FL at the end of January and hoping to visit your shop, but it just didn't work out. Next time!
I look forward to it.
Surly have some bloody funny names for their products!!. Whats the arm tattoo?. Stay Safe! love from England xxx
They’re nothing if not…..creative. It’s a mermaid. Her name is Wanda. 🧜♀️ Thanks!
@@ThePsychicDerailleur Nice!!
Very intriguing! Never knew twine on the handlebars was a thing!! Looks…cool! C’mon people, hit the 👍 and subscribe !!! We gotta keep him from doing an “Everesting” episode.
Everesting?
It was/is(?) still a TH-cam trend amongst the road cycling crowd. Cyclists from all over TH-cam’s ’reach were attempting to “climb” Everest by doing the total feet of the summit as a timed event. It caught on, strangely enough, with the elite cyclist community that gave it additional momentum. I think some did it as a means to attract viewers…which I thought was a mistake. How do you maintain that level of viewer expectation?!! (See Phil Gaimon’s efforts on his TH-cam channels for reference). In my opinion it’s a jump-the-shark-tank move for content creators. Similar to the comely-girl-in-a-bikini move. Not sustainable…unless if you’re Heidi Klum. A trap for those desperately in need of content. I don’t think you have that problem…but if you do AND you’re really desperate for more eyes, watch Gaimon’s prepping for Everesting videos. It’s a hoot!
@@sdmike1141 If you’ve seen even one of my videos you know I’m no climber 🤣. I have, however, considered taking my top off.
A timely video for me. I adopted a neglected Rivendell Hunqapillar that has the original tape, twine, and cork on the bars. I will be stripping it down to the frame and rebuilding it from there (no paint needed). I already have the tape, grips and twine, but question of how to re-twine the bars has been on my mind. Can you recommend a specific brand of shellac? Thanks…
Bullseye. Most home stores have it. Foam brushes. I’ve tried to use expensive shellac brushes but it’s a pain keeping them good. The little foam brushes cost less than a dollar. Wrap it in a plastic bag if the job is going to take more than a day. Pitch it when you’re done.
I’m considering using cotton bar tape/ shellac method on my drive side chain stay as a chain stay protector. Green cloth, clear shellac finished with hemp twine to match the handlebar. Is this something that is recommended. Thanks for the video.
Sure. You wouldn’t be the first to do that. Easier without the chain on, but do able none the less.
Thanks for the helpful video...twine comes in different sizes...which is preferable for this? maybe 2 mm? I can see if it is too small, it might break.
I never looked at the size-if there was one. I just bought hemp twine from a crafts store. Newbaums also sells a kit with, to my eyes, the same size twine. Have fun twining!
Thanks for the timely reply. @@ThePsychicDerailleur
How many watts of drag does using hemp twine save vs other types of twine?
It’s 27% faster
I see what I did wrong - too thin of twine. It looks ok but way more work!
Yeah, the stuff you get in the ball really varies. Some sections will be really thin, and others really fat. Once it’s all together-and especially if you shellac it-it’s not really noticeable. To me anyway.
Why would someone NOT like and subscribe? Be Well.
It’s a mystery James 😉