Press and hold arrows up and down + menu (EMG)button all while keying the PTT and power unit on. Service menu. Scroll to PL for power low. Then use the up or down arrow buttons to adjust. There you have it
A 203P with the CB-500 in low power works GREAT here. You can lower the carrier, and it can "swing" to around 18W. But you have to know what you are doing (test equipment needed).
Menu has selection of low and high power. 4w and 10w. I'd never run more than 2w into a 203p. Maybe there's another way to adjust low power parameter that someone will post.
![[UNCUT]"ทนายตั้ม" แฉยับ! ความลับสวรรค์ ใครคือ "บิ๊กเทวดา" ของบอสพอล l คนดังนั่งเคลียร์ l 15 ต.ค. 67](http://i.ytimg.com/vi/ru9fpSaUwdA/mqdefault.jpg)
This is gonna be the new PRO 510 of the era
Man everyone getting this radio
Press and hold arrows up and down + menu (EMG)button all while keying the PTT and power unit on. Service menu. Scroll to PL for power low. Then use the up or down arrow buttons to adjust. There you have it
A 203P with the CB-500 in low power works GREAT here. You can lower the carrier, and it can "swing" to around 18W. But you have to know what you are doing (test equipment needed).
I'm assuming you have to go through the usb to change power parameters
@@slickwillybudgetking no, it's all in the menu.
Menu has selection of low and high power. 4w and 10w. I'd never run more than 2w into a 203p. Maybe there's another way to adjust low power parameter that someone will post.