The spring tang is in the wrong location... that causes the battery door to want to stay closed, when it is supposed to spring open. You need to flip the spring around so that top part is on the other side, then when you install the door and the pin into the camera, make sure that tang sits against the visible part of the battery compartment. I checked with another BMPCC OG I have, and then it sprung open properly.
You’re welcome 😉 I don’t know I’m afraid but I don’t think it would be a tough job to get them made by an electronics PCB manufacturer but it won’t be cheap. You might be able to get replacements if you talk to blackmagic support.
niceee. the ubs port is quite easy to replace. also by seeing how the sensor cooling is done, u can see it depends on the alloy case. so i m sure its better off without the rubber black cover..
I didn’t look at the USB port but I don’t think it’s a major problem for most owners, the Micro HDMI is the biggest issue with these cameras. I haven’t heard of over heating problems but people are of course welcome to modify their own in any way they like.
Just lost the hdmi port on mine after many years of good work. Just pushed too hard and the micro hdmi port broke free of the board. This makes it obvious that you can't get it fixed unless you have a high end micro-soldiering technician to reattach those legs. Bummer b/c it makes a great 3rd camera for streaming. But alas it's better to just buy a new one for any output needs. Well done though.
Thanks i did this with first one ...it never worked again i just wanted to get the rattling hdmi port out...i ha second one and the port broke again i want get the port out but i may brake that monitor connector i have big hands i wait for the part 2 i can live without hdmi
Hello ! I wish I could replace the dc plug into a D TAP, I love this camera so much but the powering solution is so bad. Do you have any idea for this ?
@@neilhester-tech Completelly agree, but believe me, once you get an overheating alert from a mirrorless for recording 5 minutes in a radio studio, you take it as a heavy issue.
Sorry I do not offer a repair service, this video is for information only.
Nicely done. I wish all tear downs were this well made.
Thank you 😊
The spring tang is in the wrong location... that causes the battery door to want to stay closed, when it is supposed to spring open. You need to flip the spring around so that top part is on the other side, then when you install the door and the pin into the camera, make sure that tang sits against the visible part of the battery compartment. I checked with another BMPCC OG I have, and then it sprung open properly.
Thanks for spotting that, I've now swapped mine around too, I'll pin your comment to the top for other viewers too ;)
Thank you for this tear down. Do you know if there's any extension ribbons available for the rear buttons & screen?
You’re welcome 😉 I don’t know I’m afraid but I don’t think it would be a tough job to get them made by an electronics PCB manufacturer but it won’t be cheap.
You might be able to get replacements if you talk to blackmagic support.
niceee. the ubs port is quite easy to replace. also by seeing how the sensor cooling is done, u can see it depends on the alloy case. so i m sure its better off without the rubber black cover..
Also looks better
I didn’t look at the USB port but I don’t think it’s a major problem for most owners, the Micro HDMI is the biggest issue with these cameras.
I haven’t heard of over heating problems but people are of course welcome to modify their own in any way they like.
@@neilhester-tech sorry u are right i was mistaken for hdmi port
Just lost the hdmi port on mine after many years of good work. Just pushed too hard and the micro hdmi port broke free of the board. This makes it obvious that you can't get it fixed unless you have a high end micro-soldiering technician to reattach those legs. Bummer b/c it makes a great 3rd camera for streaming. But alas it's better to just buy a new one for any output needs. Well done though.
i wish there was some soldering techs around cuz i really wanna fix mine
Thank you for the advice 👍
You're welcome !
Can i send it to you for for repairs? How much does it cost?
Thanks i did this with first one ...it never worked again i just wanted to get the rattling hdmi port out...i ha second one and the port broke again i want get the port out but i may brake that monitor connector i have big hands i wait for the part 2 i can live without hdmi
i guess im living without hdmi
I have a bmpcc og that needs to brought back to life it recently just gave outon me any help?
Where i can buy the lcd bmpcc og, please need help!
Thank you!
I hope it’s useful to you 👍🏻
☺☺👍👍❤❤
Hello ! I wish I could replace the dc plug into a D TAP, I love this camera so much but the powering solution is so bad. Do you have any idea for this ?
i would just run power from v mount to the camera with a dtap-to-bmpcc power
@@MagieLamp I meant about the plug. This is so cheap i loose power randomly
Anyone know where I can buy a replacement screen?
No. But the model number is display module Ts7235u. I can't find any online, but that's the model.
I would totally put thermal paste on the copper holder, that acts as a cooler.
I would only disturb this if there was actually an overheating problem , which I haven’t seen.
Easy to do if that ever becomes an issue in the future.
@@neilhester-tech Completelly agree, but believe me, once you get an overheating alert from a mirrorless for recording 5 minutes in a radio studio, you take it as a heavy issue.
Sensacional
Hi my HDMI broke do you offer repairs?
Hi, Sorry I dont.
Has anyone ever had a problem with the dc socket? Mine ist not working anymore. Camera is doing fine with internal battery, dc socket is dead.
Probably a broken solder joint from the connector to the PCB
Im having issues with my bmpcc og can i contact you via email ?