I kept tightening and Un tightening it and was wondering wth was the problem after watching your video I felt dumb and remembered what I had to do lol Thanks !
Dude, You can lower the rear of your hood on this car by putting a washer between the hinge and the hood at the front hole. Seems counterintuitive but what this does is it lets the hood hinge rotate farther forward and lowers the back of it which is setting the height. You can also get some side to side alignment by loosening all four hood bolts and then pushing it to the side you need it moved and then tightening them. Provided you have enough slop in your holes.
Hey guys ... I have a 99 mustang I’m having that same exact problem he just showed in the video, only i replaced the hinges twice and cant get it even, she closes fully but its uneven and higher on one end,,., any help pleaseeeeee !!!!
If the car has been in any form of an accident it may keep it from lining up. I also have more to do on this car because I aligned the door and fender and need them actually both aligned to the hood
Well I pulled a mustang move and hit a curb; lesson learned and bent my lower part of the radiator core and has the exact alignment issues you have. Any advice?
It will have to be straightened on the frame area where it’s bent. If you can find the area you might be able to use ratchet straps to yank it back, but it may need to go to a body shop
I've hit 4 deer with my '03. (Iowa.) Everything but the front bumper cover is aligned, the side mounts where it bolts to the fender are broken off. Is there any way to re-attatch those brackets? It's got me stumped.
It might be difficult if they’re completely broken off, but you could see how I epoxy’d them back on for this bumper th-cam.com/video/e7kZ03hPyx4/w-d-xo.html
this isn't going to help me any. i've got a car that was in a crash twice before and the hood hinges are off, the fenders are off, and i have no initial starting point/measurements for anything. the old hood hinges and fenders were bent and taken off the car and the car was sitting for 3 months, to make things worse this type of car, the fender cowls cover up the hood hinge bolts, so you cannot tighten or adjust them without removing the fenders first, which then defeats the whole point of aligning everything. i dont even know how or where to begin.
Man I’ve been looking for hood hinges for my 92’ Buick Riviera, and I have had zero luck. Any suggestions would be greatly appreciated. No I do not want to sell or junk this car.
I do have a front bumper video, but it’s the part that’s fixed. Other panes align to it. If the car has been in an accident it may be hard to get it to all line up again th-cam.com/video/e7kZ03hPyx4/w-d-xo.html
Awesome video saved me from pulling my hair out with frustration on aligning with hood clip lock ... thanks for that video
Thank you! All this time I thought my hood was bent after a minor fender bender
I kept tightening and Un tightening it and was wondering wth was the problem after watching your video I felt dumb and remembered what I had to do lol Thanks !
Dude,
You can lower the rear of your hood on this car by putting a washer between the hinge and the hood at the front hole. Seems counterintuitive but what this does is it lets the hood hinge rotate farther forward and lowers the back of it which is setting the height. You can also get some side to side alignment by loosening all four hood bolts and then pushing it to the side you need it moved and then tightening them. Provided you have enough slop in your holes.
Thanks. I’ll have to move everything around with a second set of hands
I'm slowly restoring you're sisters old 03 gt and I've watched soo many of you're videos too and they've helped so much😅😅
for people who speak English, fender is a wing and a hood is a bonnet 😊
Amazing video! I'm doing this for my Avalon and I didnt even know that you need to adjust the hood, thank you!
Well done..doesn't look to hard..really appreciate the video..
Yes mine too on toyota camry 2011 thank you for the video
awesome money savings here!!!!!!
Thanks to you ❤
Very helpful video, similar on the 05 Jags
Thanks I’m getting some new ones ..
Did getting new ones work for your hood?
Its crazy what can get bent and damaged from hitting a deer...I know all to well.
Hey guys ... I have a 99 mustang I’m having that same exact problem he just showed in the video, only i replaced the hinges twice and cant get it even, she closes fully but its uneven and higher on one end,,., any help pleaseeeeee !!!!
If the car has been in any form of an accident it may keep it from lining up. I also have more to do on this car because I aligned the door and fender and need them actually both aligned to the hood
if the hinges and the base of them are a little up, how can I fix it? Any video?
Legend saved me 💪💪!!
Well I pulled a mustang move and hit a curb; lesson learned and bent my lower part of the radiator core and has the exact alignment issues you have. Any advice?
It will have to be straightened on the frame area where it’s bent. If you can find the area you might be able to use ratchet straps to yank it back, but it may need to go to a body shop
I have the same exact problem but on my Chrysler 300 one side is higher then other. Where do u buy ur hinges ?
Salvage yard
My hood flew off my car pulling out the stud bolts leaving a hole on the frame don't know how to go about it to fix it
You’ll need someone to weld on and bolt on a new strip of steel for the new hood hinges to bolt into
I've hit 4 deer with my '03. (Iowa.) Everything but the front bumper cover is aligned, the side mounts where it bolts to the fender are broken off. Is there any way to re-attatch those brackets? It's got me stumped.
It might be difficult if they’re completely broken off, but you could see how I epoxy’d them back on for this bumper th-cam.com/video/e7kZ03hPyx4/w-d-xo.html
this isn't going to help me any. i've got a car that was in a crash twice before and the hood hinges are off, the fenders are off, and i have no initial starting point/measurements for anything. the old hood hinges and fenders were bent and taken off the car and the car was sitting for 3 months, to make things worse this type of car, the fender cowls cover up the hood hinge bolts, so you cannot tighten or adjust them without removing the fenders first, which then defeats the whole point of aligning everything. i dont even know how or where to begin.
Where can we get the part?
At a salvage yard or eBay is probably you best bet
Man I’ve been looking for hood hinges for my 92’ Buick Riviera, and I have had zero luck. Any suggestions would be greatly appreciated.
No I do not want to sell or junk this car.
RockAuto, or junkyards I suppose. It’s hard finding parts for the early 90s GM stuff these days. At least in my experience owning a ‘94 Cutlass
👌👌👌👌👌
Do you recommend buying used oem or new aftermarket for a Cobra?
I had tried getting second set of oem but they seem bent too.
I would think they are discontinued by now unless you find them on eBay or something.
i love you danny
Do you have a video on the front bumper? how to make a perfect fitment the aline the bumper with the headlights. Thanks
I do have a front bumper video, but it’s the part that’s fixed. Other panes align to it. If the car has been in an accident it may be hard to get it to all line up again th-cam.com/video/e7kZ03hPyx4/w-d-xo.html
thanks but mine wasn't an accident.
Just wondering. Do you know what that ground is for?
It’s just to ground the hood. The car runs without it
@@dannyjohnsonsgarage i would think it's for the light but I guess not lol. I wonder why the hood would need to be grounded?
Watching this after my hood came up and broke my windshield
Yank crap car