Now you have scared me... I've been interested in watches and watch repair/building since watching quite a few of wristwatchrevival's videos, and I just threw everything for this watch in the cart and clicked buy. I know nothing personally about watches, nor have I ever worked on one, let alone built one. I hope this goes OK...
I've built a lot of watches using Seiko movements. I agree with not using a Seiko marked dial if I'm building it. One tip I can offer is have wooden toothpicks in your toolbox. Wooden toothpicks won't scratch anything on the watch, can be used for lining up the hands, and removing the stem and crown.
A word of advice, always whenever possible use a piece of rodico to move/ pick up/ place delcate objects like hands etc.. Without scratching the item.. A great looking homage.. Nice work.
4:40 that's exactly what you want to do as far as I know. Sometimes there are some extra feet on the dial for different crown positions of the movement (like 3.8 o clock or 4 o clock position of the crown) so it can be used for different movement/case combinations.
Love the build. Something I learned from a buddy of mine who services Omegas - when setting the hands, after you set the date and place the hour hand at 12, you can rotate the hour hand to the 3 o clock position to set the minute hand back at 12. Then do a full rotation and let the date change over again just to make sure all is well. Then you can set the seconds hand on back at 3 o clock. From my understanding, it’s a bit easier to set the hands this way, and this is the way Omega authorized service centers set the hands.
Not sure how many people actually went ahead and purchased the parts and also put one of these together but I ended up doing so and this was my first watch build. Turned out great on my first try! Thanks, Elliot!
I build these as a hobby and I can tell you that you did the exact right thing using the flush cutters to get rid of the extra legs on the dial. They're meant to be there just in case your case has a 3 or 4 o'clock position. The only bit of advice I could give you other than to get a proper case back tool is that you absolutely need to get yourself a loop or handheld magnifier with 30-40x magification so that you could set the hands properly. I've found it way easier to set the movement on the cushion at the edge of the table and look at the movement through the magnifier on my knees, that way you could stack one hand on top of the other and see exactly how far you need to press before you go too far.
@@saintofstreets I learned mostly from my dad, but also from TH-cam. There are tons of videos out there of specific things like how to measure and cut crown stems, how to stack hands and install crystals.
I do HO model trains as a hobby. My eyes aren't what they used to be. So, I use a ring lit magnifier. It clamps to my work bench, can rotate 360 degrees and has a collapsible arm. I can position it in a variety of ways and then let it go, freeing up my hands to put small parts on.
Quick tip, when taking off dial feet, grip the foot with a needle nose plier and twist until the foot pops off and you won't have to file anything down!
Thank you, after years of watching Nekkid, Wristwatch, etc.. You're the first TH-camr to give me confidence to build my own! Will order the parts after this.
I've made about a dozen scratchbuilds. A tip - I use a pair of plastic tweezers for all dial & hands work. I've scratched a dial or two with metal ones.
I’d like to see a video where you build the fanciest/most elaborate watch possible. Maybe loaded with as many features as possible or make it as high end as possible.
I've recently began my obsession as a watch collector. And i must say- out of all the luxury brands I've been researching, for me the amzwatch's watches are the most intriguing.
Put the hand set on with Rodico, it’s the easiest way. Need to get yourself brass or plastic tweezers, get yourself a NH35/36 movement holder also. Also get a magnifying glass so you can see the gaps between the hands while you are putting them on / before you rotate them
Cool series, on the vintage watches I work on I generally polish the hands if they’re scratched up. You could give it a try on your first set after your replacements come. I usually use a polishing stick with something like 1000-3000 grit (depending on how bad they’re scratched) to start then work up to 7000 and follow with a quick metal polish on a Q-tip like polishing stick. Afterwards I use Renaissance wax to keep them from oxidizing. It’s a cool hobby, glad you’re enjoying it!
Hey man! Loved this video as well as the past two watch building videos. I would love to see more videos in this direction but maybe doing something different? Maybe a digital watch? A G-Shock mod? Big fan, keep going!
Keep the watch content coming! Especially seiko! You can also use rodico to pick up the hands while setting them rather than tweezers. It is a moldable putty that can also be used to pick up dust on the dial.
Hell yes! I loved the last watch video. Thinking about buying myself one and trying to put it together. I hope you do some in depth stuff about how the movement works and stuff
This is awesome. I just got the sje093 and the real only difference is the case back, movement, and big crown (which is dependent on the 62MAS reissue/reinterpretation you have and/or prefer). Very nicely done!!
Hi elliot, very cool videos. I would love to see the process of how u select all of the parts to make sure that everything works together when you assemble it.
I am so thrilled to see you building watches, Elliot! I've been wanting to get into the custom mod watch game for a while, it's so cool that you're doing it, and in turn, getting me into it as well!! I was stoked when you restored your Seamaster 300 and I'm even more excited now!!! Much love
Until watching a few of your videos, ( and discovering your channel ) it has never crossed my mind to build a watch. That's all about to change now though. Gone through your parts list and I'll be building my own watch as soon as they arrive. Wish me luck! 😁
Awesome that you started doing this! I’ve been in this hobby for a while. You should try a build with a 2824/PT5000 movement. The higher beat rate is beautiful. Just don’t but the one that has blue screws…
I purchased the same hands this week and noticed in the description it said With S Logo. I asked the seller and they said the dial only comes with the Seiko logo. I wasnt happy about that but I bought it anyway. Great tip about using ceramic tweezers. Im buying them today. Im building my first watch. Your videos are so helpful
Hey man, just wanted to thank you for this video! I was inspired by this build to buy and build my own dream watch. It was very helpful, and I appreciate it!
very cool format of content, i was very surprised when i saw this video today in the morning bc yesterday i watched you building rolex and wanted to see smth like that and this is very good. Go for another build)
I'm really keen on building a watch after watching this video! Really helpful to see all the links to the parts you can buy. Could someone be kind enough to list the set of basic tools I need to buy for this please considering I'm a beginner?
i have a tissot t-touch solar...love it...over 1 year now and the watch is fenomenal...went thru sea water,wearing it at work and i am a bike mechanic....no scratches,no dents nothing..the watch is fantastic
I followed your videos, ordered all the tools and built my first watch. What a great experience. Thank you. I have 1 request. Could you build a watch with an upgraded Swiss movement? I have love to try 1 as well.
Hello sir. I know it's kinda late but for future reference: the dials with extra feet are perfectly normal. They give you more options for installing on different types of movements, different crown positions (especially seiko with some models with the crown at 4 o'clock). You did everything right so far. You should cut the extra feet, file them flush. Also some dial feet are friction fit to the movement, like in this instance they go in the plastic movement holder holes. Some other movements have screws that grab the dial feet and secure it really well. Also when installing hands. You can use plastic tweezers, wood tip tweezers, or rodico putty. Rodico putty is a tool every watchmaker uses for many things. Hope this helps, welcome to the watch rabbit hole 😁
can you also include all the tools which you used in order to build the watch as that would be very helpful for beginners who have no idea where to begin!
Wow! I never knew this hobby was a thing… reminds me of my first job in a jewellery store… changing batteries on some fine watches Thank you Do you sharing a link to get started? 👍😎
Jewellers aren't trained and don't (well hardly ever) work on watches - WATCHMAKERS / HOROLGISTS do. I'm a watchmaker and only do watches and a few clocks - not jewellery. Correctly define your terms and your trade (if you are actually a jeweller).
I had the same issue with a logo, I removed it with a little alcohol on a qtip. It went completely of. This works only on glossy dials though, be carefull not to ruin the dial.
it's super common for aliexpress (and similar) sellers to photoshop off the logos in listings to prevent copyright takedowns, especially with the popularity of "unauthorized" or duplicates of luxury watches. always check the reviews to see what customers say about logos. you can also message sellers and ask, theyd much rather answer your question than risk getting a return for inaccurate pictures
suggest blowing into the small hole in the green caseback tightening ball to re-inflate. Avoid shaking and blowing the filed particles all over the work surface as eventually one or more will end up inside the watch/movement
Absolutely love the concept! Would 100% recommend getting a UV flashlight to really show off the loom on the dials !! Will certainly make a good thumbnail and engage people !😄
It came out looking great. Ive been meaning to do a build too. I think you are missing the movement spacer between movement and case back so i doesn’t flop around and you can add (if you want) the chapter ring which makes the dial look biger inside of the case. All fyi of course you build what you love and love what you build
My favorite 2024 is the Prospex Limited Edition 1965 Recreation European Exclusive in Gradation Island Blue. The dial is stunning and the contrast when on a white strap is to die for. I will get my hands on one from MAMACOO
Hey, I would love to eventually give it a go myself it looks incredible. I would love to have a complete guide that explains how to do it that also includes the shopping part (how to find matching parts) and also all the tools needed to do this
I just ordered my first bunch of parts, I did a search based on the movement - nh35 case, nh35 dial, nh35 hands etc. I also ordered a tool kit but when I got it realised it was missing some stuff so had to order more - hand press, hand lifters, back removal ball and cushion.
There are extra sticks on the dial if you want the crown at 3.8 oclock position, so ali express makes it accessible for you to choose and remove which ones
I absolutely love watches, the high end watch brands are out of my budget but the AMZWATCH has literally an almost duplicate of every single watch on the market . Always a great but no matter your budget.
They are easy to polish! Just use a piece of toilet paper (one square) a car polisher paste (headlight polisher is the best for this), rub the hands on that paper and use a ear stick to clean after that.
hi Elliot you need to add a dial washer it's quite important.it goes between the dial side of the watch and the dial .it looks like a double bent washer .also a dab of thread lock on the crown thread to prevent it unscrewing. And also the movement needs either a retaining ring or screws to hold the movement in position, at the moment all that's holding the weight of the movement to the case is the crown stem. If your going to do more watch builds it's best you fix the ones you have done first. Otherwise you could ruin a more expensive build later on. There are a few good watch build channels on TH-cam just watch the assembly processes and you will see what you missed.
He doesn't need any of that. Ive been building watches for years and the nh35/36 dont need (washers) 💩. As for a retaining ring the case back is the retaining ring. Some case backs are made for the nh35 and nh36. You can always swap the grey ring on movement to suit case back. These grey rings on the nh35 and 36, one is slightly bigger than the other.
Hello, how did you do with the letters on the dial to write Seiko? The page you gave is just normal dial, or did you talk to the Chinese to write it! Thank you!
I don't think ceramic tweezers will stop scratching. I've used them for bending hot wire and they scratched the surfaces I worked on, maybe teflon or some sturdy plastic tweezers may work?
You can put a piece of tape on the end that you're cutting off so that it doesn't fly crazy far. If you use painters tape it will also be easier to find if it does fly too far.
nothing needs to change about this channel's format in my mind. you're clearly having a good bit of fun trying out new things with these watches :)
Agree
i agree
You've got yourself into watches?
You're done, mate.
Absolutely done. This rabbit hole just doesn't end.
😂😂
Yeah I have all the parts for an aquanaut in my AE basket. It is hard not to just click buy. Who the hell needs an orange watch??! I just can't stop.
So damn true😂
facts i wanna build a watch for the channel
Now you have scared me... I've been interested in watches and watch repair/building since watching quite a few of wristwatchrevival's videos, and I just threw everything for this watch in the cart and clicked buy. I know nothing personally about watches, nor have I ever worked on one, let alone built one. I hope this goes OK...
i NEVER thought i would enjoy watching someone builds a knockoff watches so much man keep it up u found your succes formula on yt
I've built a lot of watches using Seiko movements. I agree with not using a Seiko marked dial if I'm building it. One tip I can offer is have wooden toothpicks in your toolbox. Wooden toothpicks won't scratch anything on the watch, can be used for lining up the hands, and removing the stem and crown.
Tooth picks all day baby!
Where do you buy the parts?
Do you have a Tipp for putting down the second Hand?
Thanks for the tip!
A word of advice, always whenever possible use a piece of rodico to move/ pick up/ place delcate objects like hands etc.. Without scratching the item.. A great looking homage.. Nice work.
4:40 that's exactly what you want to do as far as I know. Sometimes there are some extra feet on the dial for different crown positions of the movement (like 3.8 o clock or 4 o clock position of the crown) so it can be used for different movement/case combinations.
Yup, its so you can use for several feet positions. Prolly shouldve used something sticky like blue tack to get all the metal dust after filing.
Rodico is best for that, it doesn't have a greasy residue.
Yo a question for you, if I buy a 28.5mm nh35 dial then can I use the same movenment as the one he used. I’m very new to this!
@@Illeeegalpretty sure you can as he is using nh35 movement
@@gk7CodM cool
Love the build. Something I learned from a buddy of mine who services Omegas - when setting the hands, after you set the date and place the hour hand at 12, you can rotate the hour hand to the 3 o clock position to set the minute hand back at 12. Then do a full rotation and let the date change over again just to make sure all is well. Then you can set the seconds hand on back at 3 o clock. From my understanding, it’s a bit easier to set the hands this way, and this is the way Omega authorized service centers set the hands.
Let’s watch Elliot build another watch! 👀
Not sure how many people actually went ahead and purchased the parts and also put one of these together but I ended up doing so and this was my first watch build. Turned out great on my first try! Thanks, Elliot!
ive just ordered part to give it a shot myself! there are a few of us out there on the same learning curve
@bazilboyle8240 Nice! Let me know how it turns out
I build these as a hobby and I can tell you that you did the exact right thing using the flush cutters to get rid of the extra legs on the dial. They're meant to be there just in case your case has a 3 or 4 o'clock position.
The only bit of advice I could give you other than to get a proper case back tool is that you absolutely need to get yourself a loop or handheld magnifier with 30-40x magification so that you could set the hands properly. I've found it way easier to set the movement on the cushion at the edge of the table and look at the movement through the magnifier on my knees, that way you could stack one hand on top of the other and see exactly how far you need to press before you go too far.
Is there a website or resource for people who are interested in building affordable watches as a hobby?
@@saintofstreets I learned mostly from my dad, but also from TH-cam. There are tons of videos out there of specific things like how to measure and cut crown stems, how to stack hands and install crystals.
I do HO model trains as a hobby. My eyes aren't what they used to be. So, I use a ring lit magnifier. It clamps to my work bench, can rotate 360 degrees and has a collapsible arm. I can position it in a variety of ways and then let it go, freeing up my hands to put small parts on.
Keep these builds coming absolutely love them!
Quick tip, when taking off dial feet, grip the foot with a needle nose plier and twist until the foot pops off and you won't have to file anything down!
These skin divers case have such a classic design, I love it!
Shout out to you for branching out and succeeding, most youtubers do new content and it just flops. Nice job.
Keep these videos coming! Youre getting alot of people into watches AND retro stuff. Youre too cool
Thank you, after years of watching Nekkid, Wristwatch, etc.. You're the first TH-camr to give me confidence to build my own! Will order the parts after this.
Hey mate, loved the last few videos, do you mind linking the tools you brought too?
I've made about a dozen scratchbuilds. A tip - I use a pair of plastic tweezers for all dial & hands work. I've scratched a dial or two with metal ones.
I’d like to see a video where you build the fanciest/most elaborate watch possible. Maybe loaded with as many features as possible or make it as high end as possible.
Id love to learn more on how to figure out parts compatibility!! How do you make sure all the parts you order are gonna fit?
I've recently began my obsession as a watch collector. And i must say- out of all the luxury brands I've been researching, for me the amzwatch's watches are the most intriguing.
Lololol your assessment of the finished product is hilarious. It is a handsome watch. Nicely done.
MAMACOO Stunning watches stunning video you are special i love it keep it up
Put the hand set on with Rodico, it’s the easiest way.
Need to get yourself brass or plastic tweezers, get yourself a NH35/36 movement holder also.
Also get a magnifying glass so you can see the gaps between the hands while you are putting them on / before you rotate them
Cool series, on the vintage watches I work on I generally polish the hands if they’re scratched up. You could give it a try on your first set after your replacements come. I usually use a polishing stick with something like 1000-3000 grit (depending on how bad they’re scratched) to start then work up to 7000 and follow with a quick metal polish on a Q-tip like polishing stick. Afterwards I use Renaissance wax to keep them from oxidizing. It’s a cool hobby, glad you’re enjoying it!
Wonderfully done. Thank you for taking my suggestion from the last video and listing the parts!
The passion you put into everything you do, makes every video wonderful.
You are always a great inspiration.
Good for you, that is a great result, well done. I really fancy having a go myself.
Hey man! Loved this video as well as the past two watch building videos. I would love to see more videos in this direction but maybe doing something different? Maybe a digital watch? A G-Shock mod? Big fan, keep going!
Good job,this watch is actually the nicest so far on your Chanel
would love to see this become a series
Keep the watch content coming! Especially seiko! You can also use rodico to pick up the hands while setting them rather than tweezers. It is a moldable putty that can also be used to pick up dust on the dial.
Great video, definitely don't change anything about the way you make and present your videos. The comments speak for themselves. Nice build Elliot.
Hell yes! I loved the last watch video. Thinking about buying myself one and trying to put it together. I hope you do some in depth stuff about how the movement works and stuff
love that you're into this now, looking forward to seeing more!
This is awesome. I just got the sje093 and the real only difference is the case back, movement, and big crown (which is dependent on the 62MAS reissue/reinterpretation you have and/or prefer). Very nicely done!!
Hi elliot, very cool videos. I would love to see the process of how u select all of the parts to make sure that everything works together when you assemble it.
I am so thrilled to see you building watches, Elliot! I've been wanting to get into the custom mod watch game for a while, it's so cool that you're doing it, and in turn, getting me into it as well!! I was stoked when you restored your Seamaster 300 and I'm even more excited now!!! Much love
This is amazing!!! More watch videos plz! Love the new change in tech from handheld, to wrist worn!
Elliot as a Wristwatch Revival subscriber I really enjoyed this video. I am going to binge watch your other videos now. Cheers!
Your tries are so inspiring. My mats will be arriving in May and I am so hyped after watching your video.
Until watching a few of your videos, ( and discovering your channel ) it has never crossed my mind to build a watch. That's all about to change now though. Gone through your parts list and I'll be building my own watch as soon as they arrive. Wish me luck! 😁
Awesome that you started doing this! I’ve been in this hobby for a while. You should try a build with a 2824/PT5000 movement. The higher beat rate is beautiful. Just don’t but the one that has blue screws…
I purchased the same hands this week and noticed in the description it said With S Logo. I asked the seller and they said the dial only comes with the Seiko logo. I wasnt happy about that but I bought it anyway.
Great tip about using ceramic tweezers. Im buying them today. Im building my first watch. Your videos are so helpful
Hey man, just wanted to thank you for this video! I was inspired by this build to buy and build my own dream watch. It was very helpful, and I appreciate it!
very cool format of content, i was very surprised when i saw this video today in the morning bc yesterday i watched you building rolex and wanted to see smth like that and this is very good. Go for another build)
The channel is amazing! I’d love to see an aliexpress Cartier-like watch
my god Elliot yes come to the world of watches!! love this
Subscribed off the first watch video! Absolutely love these, never thought I'd build a watch but I've now got a huge part list for the first 2!
I'm really keen on building a watch after watching this video! Really helpful to see all the links to the parts you can buy. Could someone be kind enough to list the set of basic tools I need to buy for this please considering I'm a beginner?
Good ol' pot noodle and a Elliot Coll watch video.
I was in a bad mood until I watched your video. Now my spirits are uplifted. Your commentary is brilliant! 😂
Wow😊😊😊 Bravo, très très beau travail et de sang froid 😊
i have a tissot t-touch solar...love it...over 1 year now and the watch is fenomenal...went thru sea water,wearing it at work and i am a bike mechanic....no scratches,no dents nothing..the watch is fantastic
Is it a self build? would love to see the parts list for that
One of my favourite brand of watches lovely build 👍
I followed your videos, ordered all the tools and built my first watch. What a great experience. Thank you.
I have 1 request. Could you build a watch with an upgraded Swiss movement? I have love to try 1 as well.
Hello sir. I know it's kinda late but for future reference: the dials with extra feet are perfectly normal. They give you more options for installing on different types of movements, different crown positions (especially seiko with some models with the crown at 4 o'clock). You did everything right so far. You should cut the extra feet, file them flush. Also some dial feet are friction fit to the movement, like in this instance they go in the plastic movement holder holes. Some other movements have screws that grab the dial feet and secure it really well. Also when installing hands. You can use plastic tweezers, wood tip tweezers, or rodico putty. Rodico putty is a tool every watchmaker uses for many things. Hope this helps, welcome to the watch rabbit hole 😁
Congrats, you've pulled me into this hobby as well. I've ordered the parts and can't wait until I get to build my own watch now
how'd it go??
@cw.captures badly. I now have a collection of 50 watches, most of which I built
Awesome! Very interesting and ironically your watch videos are the first watch build videos ive ever seen! Nice! 👌
can you also include all the tools which you used in order to build the watch as that would be very helpful for beginners who have no idea where to begin!
Have you thought about making a video describing the process of looking for parts that match?
Lol. The case back says 300m and the dial says 200m. Just adds to the coolness of the project. Keep 'em coming
Mate, slowly taking over the retro future as the main channel. Last videos have been top notch mate!! 🎉
Wow!
I never knew this hobby was a thing… reminds me of my first job in a jewellery store… changing batteries on some fine watches
Thank you
Do you sharing a link to get started?
👍😎
One thing I’d recommend is getting some decent spring bars for your strap, the ones you get with the cheaper cases tend to bend quite easily
Awesome build! Planning to get one for myself! What hinders me is just bought a watch yesterday
Please make more videos of you making watches. It’s super fun and just ordered parts for my first custom build
I would love to watch you build a cartier esk watch, something like the tank, or a santos : )
18:09 the rotate and the sound >>>
I have never been disappointed since I became a customer of MAMACOO. Their watches are of exceptional quality.
I’m a jeweller so I do this all day! watching you do it reminds me when I first did it.
Keep this shit up.I love it!
Jewellers aren't trained and don't (well hardly ever) work on watches - WATCHMAKERS / HOROLGISTS do. I'm a watchmaker and only do watches and a few clocks - not jewellery. Correctly define your terms and your trade (if you are actually a jeweller).
@@irenewieringa4634calm down man, stop crying
You have to use wood tweezers too for placing the hands (avoid scratches )
I had the same issue with a logo, I removed it with a little alcohol on a qtip. It went completely of. This works only on glossy dials though, be carefull not to ruin the dial.
it's super common for aliexpress (and similar) sellers to photoshop off the logos in listings to prevent copyright takedowns, especially with the popularity of "unauthorized" or duplicates of luxury watches. always check the reviews to see what customers say about logos. you can also message sellers and ask, theyd much rather answer your question than risk getting a return for inaccurate pictures
Nice build video but did u screw the dial legs? And not contain the movement screws to the case?
More of this, assembling modern versions of vintage styles for everyday wear.
suggest blowing into the small hole in the green caseback tightening ball to re-inflate. Avoid shaking and blowing the filed particles all over the work surface as eventually one or more will end up inside the watch/movement
Absolutely love the concept! Would 100% recommend getting a UV flashlight to really show off the loom on the dials !! Will certainly make a good thumbnail and engage people !😄
that was incredible. what a beautiful watch and what great work you did on it!MAMACOO
Would like a video about your tools, what you decide to upgrade, what you need, what you don’t, how much you should spend etc.
It came out looking great. Ive been meaning to do a build too. I think you are missing the movement spacer between movement and case back so i doesn’t flop around and you can add (if you want) the chapter ring which makes the dial look biger inside of the case. All fyi of course you build what you love and love what you build
My favorite 2024 is the Prospex Limited Edition 1965 Recreation European Exclusive in Gradation Island Blue. The dial is stunning and the contrast when on a white strap is to die for. I will get my hands on one from MAMACOO
If you plan on anything close to serious measurements, get an analog caliper. Make sure it has the thumb rolly thing.
Hey, I would love to eventually give it a go myself it looks incredible.
I would love to have a complete guide that explains how to do it that also includes the shopping part (how to find matching parts) and also all the tools needed to do this
I just ordered my first bunch of parts, I did a search based on the movement - nh35 case, nh35 dial, nh35 hands etc. I also ordered a tool kit but when I got it realised it was missing some stuff so had to order more - hand press, hand lifters, back removal ball and cushion.
There are extra sticks on the dial if you want the crown at 3.8 oclock position, so ali express makes it accessible for you to choose and remove which ones
What parts & case to choose to be more sure that watch is waterproof, at least for swimming? Or its just a matter of carefull asembling?
brings back a lot of memories builing my own watches with china parts. good stuff man.
I absolutely love watches, the high end watch brands are out of my budget but the AMZWATCH has literally an almost duplicate of every single watch on the market . Always a great but no matter your budget.
I believe the dial you have is make for two Different Movements. Depending on your movement. You have to clip the dial post.
They are easy to polish! Just use a piece of toilet paper (one square) a car polisher paste (headlight polisher is the best for this), rub the hands on that paper and use a ear stick to clean after that.
this is such a bad idea lmao
Rodico putty instead of new pliers are more of a priority IMO. Useful for holding hands and picking up specs of dust off dial faces and such!
Is this build waterproof? Not for diving but for example pool and regular beach?
hi Elliot you need to add a dial washer it's quite important.it goes between the dial side of the watch and the dial .it looks like a double bent washer .also a dab of thread lock on the crown thread to prevent it unscrewing. And also the movement needs either a retaining ring or screws to hold the movement in position, at the moment all that's holding the weight of the movement to the case is the crown stem. If your going to do more watch builds it's best you fix the ones you have done first. Otherwise you could ruin a more expensive build later on. There are a few good watch build channels on TH-cam just watch the assembly processes and you will see what you missed.
Any advice on a channel to learn from the very basics and also which tools to buy?
wristwatchrevival is a really good watch making channel
He doesn't need any of that. Ive been building watches for years and the nh35/36 dont need (washers) 💩. As for a retaining ring the case back is the retaining ring. Some case backs are made for the nh35 and nh36. You can always swap the grey ring on movement to suit case back. These grey rings on the nh35 and 36, one is slightly bigger than the other.
Nh movements don't require washers.
The plastic movement ring holds the movement in the case.
All dat amzwatch watches sssssoooooooo gorgeous！
Hello, how did you do with the letters on the dial to write Seiko? The page you gave is just normal dial, or did you talk to the Chinese to write it! Thank you!
I don't think ceramic tweezers will stop scratching. I've used them for bending hot wire and they scratched the surfaces I worked on, maybe teflon or some sturdy plastic tweezers may work?
Yeah this has definitely motivated me to build my own watch. Great video!
Because they need to support many types of movements, they have more legs than needed. Just remove and file down the ones you do not need.
Can you put the links to the tools you used in the desciption? I would like to try and do this myself 😁
You can put a piece of tape on the end that you're cutting off so that it doesn't fly crazy far. If you use painters tape it will also be easier to find if it does fly too far.