“clean and oil” grandfathers clock (with out taking everything apart) 100% synthetic oil liberty

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 154

  • @RADone65
    @RADone65 11 หลายเดือนก่อน +3

    ONE THING I NOTICED:
    When you wound the clock, you pulled on BOTH sides of the chain...UP...AND...DOWN!
    My grandfather taught me this a long time ago and I have caught many people NOT doing it this way several times and corrected them.
    I am glad you showed doing it that way!
    Thank you!

  • @billbell2311
    @billbell2311 2 ปีที่แล้ว +9

    Thank you! My Dad built a grandfather clock from an Emperor clock kit in 1989. I inherited it when he passed away. Your video helped me get the clock running and chiming again!

  • @jimw1615
    @jimw1615 11 หลายเดือนก่อน +2

    Jan 14, 2024 I've watched your video on grandfather clock mechanism cleaning and oiling (along with a host of other TH-cam videos on the subject). Today, I took the movement (which I had earlier removed from the clock) and cleaned and oiled it. I took my time and the work progressed without a hitch. Upon completion, I reinstalled the movement, face, weights, and pendulum. The clock now chimes all three tunes, gongs and accurately keeps time without any problems. Most of my time spent on this project involved watching TH-cam videos and taking notes on the subject before I started anything else. The cleaning and oiling work really is very straight forward. Oh, and I did find using toothpicks would work but the force required to clean old oil out of the pivot holes caused the toothpicks to splinter or break. Toothpick wood seems to be too soft for this work. A sharpened, small-diameter wood dowel with small pieces of old T-shirt worked great for me doing this cleaning work.
    My clock is a 1982 Ridgeway Grandfather 3-chime, 3-weight, chain-driven Clock with a Urgos UW 32 570 D movement. My clock movement uses a single 6.2-pound weight along with two (2) 4.6-pound weights and a 35" long pendulum with 6.5" dia. bob. I've taken the movement out of the clock case to clean and oil it with the intent of restoring the gong and chime functions. The process of removing the movement from my clock case was straight forward and uses tapered pins to hold the clock face to the movement. Thank you for the straightforward, nicely shot video (great lighting, angles and audio) on clock cleaning, oiling and operation.

    • @thomasgriffin8269
      @thomasgriffin8269 10 หลายเดือนก่อน +1

      I have a ridgeway from the same time period.. I have 3 weights.. does the heaviest weight go on the right chain..??

    • @jimw1615
      @jimw1615 10 หลายเดือนก่อน

      @@thomasgriffin8269 Hi Thomas - Yes, the heaviest weight goes on the right as you look at the clock.

    • @casper471
      @casper471 9 หลายเดือนก่อน

      Clock has to be removed and cleaned properly before ANY oil is used. This is a great way to ruin your clock.
      DO NOT DO THIS

    • @jimw1615
      @jimw1615 9 หลายเดือนก่อน

      @@casper471 It's funny how after decades of the chimes not working and the clock keeping time slowly, after my removal of the clock works, its cleaning, and oiling, the clock now works just like it did when it was new, however. Do you have any other "scare messages" you wish to share that are more specific than the generalization you offer? Thanks in advance.

    • @Cobesclocks
      @Cobesclocks 5 หลายเดือนก่อน +1

      @@jimw1615putting a small tooth pick in the pivots is getting less than half of the actual gunk out which is lodged in between the pinion and coats the pivot from the other side the new oil and old oil becomes a sand paper mixture over a few years and actually causes more wear

  • @anitadecourval433
    @anitadecourval433 2 ปีที่แล้ว +5

    Unbelievable! I got my grandfather clock running again thanks to your instructions and Liberty oil! Thanks a bunch!

  • @kevinfox3875
    @kevinfox3875 2 ปีที่แล้ว +5

    The chime on the left of the 4 is miles off frequency...suspect it's been shortened as it's at least a half tone too high

    • @precinct1baltimorecountyre588
      @precinct1baltimorecountyre588 2 ปีที่แล้ว +1

      I noticed that to the pitch used to be adjusted with set screw to adjust length of the bell

  • @SumProject18
    @SumProject18 4 ปีที่แล้ว +4

    Wow!! Did the exact same to my grandma's clock and now it's working! Chimes are slow, but works

  • @xfireamg417
    @xfireamg417 ปีที่แล้ว +2

    Thanks for the video. I picked up some synthetic clock oil and got a friend's clock working again. The main issue seemed to be with that upper fast spinning flywheel which began working as soon as I oiled those bearing. Many thanks

  • @douglaspond907
    @douglaspond907 ปีที่แล้ว +1

    Best grandfather clock video ever!!

  • @129stacey
    @129stacey ปีที่แล้ว

    Those chimes sounded beautiful, thank you so much

  • @en2oh
    @en2oh ปีที่แล้ว +1

    the Hermle Service manual recommends using pegwood sticks to dislodge dried lubricant etc. Oiling alone won't address that problem, will it?

  • @jimmyhuesandthehouserocker1069
    @jimmyhuesandthehouserocker1069 3 ปีที่แล้ว +6

    If the chimes don't work, you may have the wrong weight. On some grandfather clocks, the chime weight is heavier than the movement weight. One weight drives the chimes, the middle weight drives the movement and the third weight drives the strike

    • @shericreates
      @shericreates 2 ปีที่แล้ว +1

      I’m stuck. I just was given a Tempus Fugit grandfather clock and the chimes don’t sound. I weighed each one of the weights and they were basically all the same - 4.12 lbs. one was 4.4 lbs. Can’t figure out if there is maybe a silent button.

    • @j.r.kormanik8172
      @j.r.kormanik8172 ปีที่แล้ว

      Bare hands on brass weights is a no no. Wear gloves when touching or handling brass.

  • @alfakilla1
    @alfakilla1 2 ปีที่แล้ว +1

    Thank you....my grandfather is operating as it should, thanks to ur video

    • @precinct1baltimorecountyre588
      @precinct1baltimorecountyre588 2 ปีที่แล้ว

      Your grandfather is a doctor? What kind of surgery's does he do when he operates??¿

    • @alfakilla1
      @alfakilla1 2 ปีที่แล้ว

      @@precinct1baltimorecountyre588 haha...grandfather clock lol

  • @donnamurphree4840
    @donnamurphree4840 ปีที่แล้ว +1

    How do I get the chains back on the gears

  • @denniswright6134
    @denniswright6134 ปีที่แล้ว

    Thanks for the great video and helping me get our grandfather clock working again!

  • @kesterbanker2980
    @kesterbanker2980 ปีที่แล้ว +1

    Very helpful. I've got the same clock & clock movement so will be cleaning and oiling mine soon. Thank you.

  • @Alan-jx7uk
    @Alan-jx7uk 4 หลายเดือนก่อน

    LOL please move the hour hand. It's like 15 minutes off.
    I recently acquired a chain driven tall clock and the first time I wound it I thought wow that takes a lot of effort to pull the chain down so I lifted up on the weight to make it easier. Also I believe that winding it by lifting on the weight as you pull the chain prevents a lot of wear to the barrel pivots and the chains.

  • @Samhain2323
    @Samhain2323 2 ปีที่แล้ว +3

    My exact model !!! Thanks so much 🙏 I just inherited it from my mom 😊

  • @michaelweiss9219
    @michaelweiss9219 ปีที่แล้ว

    I believe you are supposed to turn the clock hands counter clockwise to set the time, could be just to prevent the chimes from activating, also avoid hand movement during the five minuets before a chime would trigger...

    • @casper471
      @casper471 9 หลายเดือนก่อน +1

      Never turn your clock backwards

    • @abf2813
      @abf2813 หลายเดือนก่อน

      My howard miller owners manual says hands should only be moved counterclockwise

  • @visteobman4202
    @visteobman4202 4 ปีที่แล้ว +17

    Title should be, "how to get a clock working with just some oil". When properly cleaning a clock you can test the movement with no oil after all the pivots and bushings are clean. It will run without oil if everything is good. Dust has terrible things in it, like silica. If you don't remove all the dried-up oil and dirt, you are slowly eating away at the bushings and pivots. Eventually the orientation between the gears changes and you are looking at a very expensive repair. If you only run the clock rarely, there is nothing wrong with what you are doing. I hope you consider a complete disassembly at some point, if you value your clock and want it to last.

    • @Michael.Chapman
      @Michael.Chapman 2 ปีที่แล้ว +1

      Thanks for that information. Do you recommend for greatest longevity that vintage and antique clocks not be constantly run or only be periodically run? It is very hard these days to find people of extensive experience to maintain a small collection of superb clocks.

    • @tonyedwards6369
      @tonyedwards6369 2 ปีที่แล้ว +1

      Given the cost of horological overhauls usualy a new replacement movement is offered this costing less on reproduction longcase clocks. A flushdown clean,clock oiling, maybe slightly heavier weights then required is another DIY option lower in cost,the old less heavy weights can be sold on ebay to partialy defray costs

  • @varapornn.3380
    @varapornn.3380 ปีที่แล้ว

    Many thanks for vedio, I have the problem which I couldn't put the medle chain back on the gear, any vedio please

  • @MegaMindyLou
    @MegaMindyLou 4 ปีที่แล้ว +5

    Excellent video! Thank you for taking the time to video your work and share it.

    • @jerejohnston5384
      @jerejohnston5384 4 ปีที่แล้ว +1

      Mega, please use Cotton gloves and only move the minute hand in a counter-clockwise direction. The hour hand can be moved either direction. Good luck.

  • @aliceaten1428
    @aliceaten1428 2 ปีที่แล้ว

    My husband had my oldest son make me one in 1997. Its almost 25 yrs old. The year my oldest grandchild was born.🥰

  • @TheSoonerbruce
    @TheSoonerbruce 3 ปีที่แล้ว +2

    It looked like you had a uniform on like mine. I used to drive package cars too. Thanks for the video. Maybe I can fix my 140 year old clock now.

  • @b.walker930
    @b.walker930 2 ปีที่แล้ว

    Wonderful video! And the clock! The works and the cabinet are exactly like my 'kit' I ordered and assembled in 1994 from the Emperor Clock Company. I will clean and oil my clock as the chimes are not slow or not starting....

  • @catfish24
    @catfish24 2 หลายเดือนก่อน

    Why are these clocks so dam delicate a speck of dust can stop it that's crazy.

  • @charlesfuentes3695
    @charlesfuentes3695 2 ปีที่แล้ว +1

    To rid of access oil can i use q-tips to absorb too much?

  • @latindragon363
    @latindragon363 ปีที่แล้ว

    Would like to know how I can purchase a video on how to remove the movement on a howard miller 3 weight cable grandfather clock.

  • @Layarion
    @Layarion ปีที่แล้ว

    question, some clocks just let you "pull" on a string to get a weight back to the top, instead of winding. i want to make a pendulum and weight powered clock from scratch. how is the pulling of a string part achieved.

    • @casper471
      @casper471 9 หลายเดือนก่อน +1

      That's a cable drive movement

  • @angelgkd
    @angelgkd 3 หลายเดือนก่อน

    Excellent!!! Learned a lot. Much appreciated!

  • @ToyotaKTM
    @ToyotaKTM 3 ปีที่แล้ว +8

    The teeth of brass gears should NOT be oiled. If you watch the videos from clock repair shops, they all agree NOT to oil brass gears. Error 1 at 2:40

    • @EVRose60
      @EVRose60 3 ปีที่แล้ว +2

      I'm sure he was oiling the shaft that gear was on.

  • @ThreePhaseHigh
    @ThreePhaseHigh ปีที่แล้ว

    When you say air blown out, do you mean start with an air compressor and get some of the dust blown out?

  • @flyingarrow7955
    @flyingarrow7955 ปีที่แล้ว

    Just moved my parents Grandfather Clock to my house. It hadn't ran in a couple of years. When I go to start the pendulum it will only go for about 10 seconds and stop. sounds like something is rubbing??? Could this just be from it not being level or is there something else that could be the problem? Great video!

  • @jdprice3043
    @jdprice3043 3 หลายเดือนก่อน

    THANK YOU FOR YOUR HELP

  • @IH1940HAY
    @IH1940HAY 3 ปีที่แล้ว +2

    I have a Ridgeway model 225 and all of the sudden it stopped running, I gave the pendulum a swing and the tick/tock was very uneven. Searched YT and one recommendation was to slightly turn the anchor escapement. I touched it and discovered that there wasn’t and resistance between it and the shaft, it rotated freely on the shaft. I played with it and got the tick/tock sounding and measuring good and it runs, but I’m sure it’s just a matter of time before it slips and rotates out of position and stops running.
    What to do? I’m thinking of shielding the area below the loose anchor and cleaning the shaft and side of the anchor and applying a small spot of very thick glue hopefully securing the anchor, not using and this glue that would seep into the gaps but only on the outer surface.
    What do you think? Any suggestions?

  • @precinct1baltimorecountyre588
    @precinct1baltimorecountyre588 2 ปีที่แล้ว +2

    Btw that's a hat pin not a sewing needle.

  • @dazzfromaus4797
    @dazzfromaus4797 7 หลายเดือนก่อน

    Good job for just getting the chimes going again .
    For oiling use a seringe with a needle as an oiler.
    Once again OK for just getting them going again.
    Just next time leave it to the professional clock service person.

  • @Adil14912ali
    @Adil14912ali ปีที่แล้ว

    Can you please tell me which blower is it that you used?

  • @aaproductstutorialsbyallra8608
    @aaproductstutorialsbyallra8608 2 ปีที่แล้ว

    How can you get we 40 off the movement if we messed up

  • @Woody21369
    @Woody21369 ปีที่แล้ว

    Would this apply to to the clock time as well? My two chimes work great but I have to remove the pendulum to ge tthe time to run and that is way to fast.... :(

  • @tommowreyhomewerksllc685
    @tommowreyhomewerksllc685 10 หลายเดือนก่อน

    How did you get the back panel off?

  • @bobwiley6221
    @bobwiley6221 2 ปีที่แล้ว

    You mentioned using ammonia to clean a very dirty clock works. Ammonia will weaken brass. When vibrating brass cases you can add a non=ammonia cleaner to help with the shining of the brass, but never ammonia based stuff like Brasso.

  • @jorgecaleromoya738
    @jorgecaleromoya738 10 หลายเดือนก่อน +1

    TENGO UN RELOJ DE CARRILLON PERO DOS PESAS DE ELLAS NO BAJAN DE QUE PODRIA SER GRACIAS DESDE ESPAÑA🕰🕰

  • @ABCGE100
    @ABCGE100 ปีที่แล้ว

    Mine chimes a lot faster after lining it up. I think too fast. Any advice on how to find that sweet spot in the tempo?

  • @paultennis9569
    @paultennis9569 4 ปีที่แล้ว +1

    Wish you lived in PA to look and teach on how to maintain gf clocks

  • @faythomas3914
    @faythomas3914 7 หลายเดือนก่อน

    I oiled mine way too much and now not holding the weight what should I do?

  • @johnc8112
    @johnc8112 3 ปีที่แล้ว

    Great video few questions
    1. Grandfather clock stopped working many years ago.
    2. Chimes not working.
    3. When start clock works for 2 or 3 minutes then stops. May someone please help me.

    • @MrAquinas1
      @MrAquinas1 3 ปีที่แล้ว +1

      Watch the video. The axles and bearings need lube every so often. It not, the clock stops. You can repair it yourself with TLC lubing. Just be patient.

    • @johnc8112
      @johnc8112 3 ปีที่แล้ว

      @@MrAquinas1 thanks, will do as you say lube it till it works. When I get it to work will get in touch with you. Thanks again John

    • @johnc8112
      @johnc8112 3 ปีที่แล้ว

      @@MrAquinas1 Hi Ed, this afternoon work on grandfather clock about 2.5 hours to get clock to work just like new. Thanks again John

    • @MrAquinas1
      @MrAquinas1 3 ปีที่แล้ว +1

      @@johnc8112 Good for you. I saved a lot of money buying a non-working Ethan Allen GFC for a small fraction of its original price guessing it was repairable. I hired a serviceman the first time, who didn't charge much, and watched him. All he did is pinpoint lubrication and got it going, although I rarely use the chimes because it's too close to my bedroom. It drove my late wife crazy. I just use the chimes on rare ocassions like Christmas.

    • @johnc8112
      @johnc8112 2 ปีที่แล้ว

      @@dperry428 Thank you, for one year with lubrication of all points running after one year. Now on and off running have lubricant twice lot of lub.

  • @patrickcasey330
    @patrickcasey330 2 ปีที่แล้ว

    so you lubricate the back. How about the front (behind the face)

  • @williamhutton1945
    @williamhutton1945 2 ปีที่แล้ว

    What if I’ve been using wd40. The chimes on my clock are stiff. How do I loosen them up? Will the Liberty oil loosen them up?

  • @precinct1baltimorecountyre588
    @precinct1baltimorecountyre588 2 ปีที่แล้ว

    So what oil for wood movements??

  • @DarrellJr2
    @DarrellJr2 3 ปีที่แล้ว

    My chain drive grandfather clock needs to be oiled hasn’t been since I got it

  • @joexeon
    @joexeon 4 ปีที่แล้ว +3

    One of the best Live Free Videos yet! Love the DIY details on this very expensive service! Great advice and technique not to over oil a clock. 'A little, goes a long way!' How often do you oil your clocks-recommended. I would imagine it depends on environment. Every year, quarter?

    • @livefree6878
      @livefree6878  4 ปีที่แล้ว +1

      👍👍 all the recommendations so five years, in the right environment 10 years 👍👍

    • @firealarm2903_
      @firealarm2903_ 4 ปีที่แล้ว +1

      @@livefree6878 wait is the clock yours?

    • @mariajesusroman3606
      @mariajesusroman3606 ปีที่แล้ว

      Cómo hacer que suene el carrillon

  • @markusn707
    @markusn707 3 ปีที่แล้ว +2

    I'll give you a good tip ...
    Remove the clockwork, clean it ultrasonically (with a little grease cleaner), dry it and oil it again. You will see that Hermle then runs and hits perfectly.
    Warm greetings from Germany

    • @thupham-nw5tp
      @thupham-nw5tp 2 ปีที่แล้ว

      My grandfather clock runs very good, but it doesn't chime. Please show me how to make it to chime.
      Thanks so much !

    • @NubianP6
      @NubianP6 2 ปีที่แล้ว

      I had my grandfather clock made in the Black Forest when I lived Germany. I’d love to be able to take the clockwork out to clean it as you’ve described, but in all honesty, I’d be nervous about breaking something.

    • @markusn707
      @markusn707 2 ปีที่แล้ว

      @@NubianP6 is a Hermle, Kieninger or another Movement?

  • @davidwilcox9110
    @davidwilcox9110 ปีที่แล้ว

    My chime wont stop. Where do I look?

  • @sc-to4uf
    @sc-to4uf 3 ปีที่แล้ว

    *My grandmother clock suddenly stop chiming. I don;t know what to do. The last time I sent to a shop for maintenance, it costs me an arm and a leg. Any suggestions? There is a lever inside the box that has a piece of transparency wrapped over a lever that reads "Ferma Souneria". I raised it up and down but nothing happens. In all other respects, the clock is functioning ok.*

  • @latindragon363
    @latindragon363 ปีที่แล้ว

    How do I remove the movement

  • @MB-ou9wi
    @MB-ou9wi ปีที่แล้ว +3

    This is not the way it's done. It needs to be taken out, disassembled, cleaned, check for worn pivot holes. I do this correctly.

  • @judyfrasca7923
    @judyfrasca7923 3 ปีที่แล้ว

    I have a different question. The swing on my pendulum has become very shallow. How and/or can this be corrected? When it was new it had a nice wide side to side swing. Now you really have to look at it to see it's moving side to side.

    • @moreandmoreclocks9781
      @moreandmoreclocks9781 3 ปีที่แล้ว

      It means the clock isn’t running give the pendulum another swing

    • @judyfrasca7923
      @judyfrasca7923 2 ปีที่แล้ว

      @@moreandmoreclocks9781 No, it is running.

    • @judyfrasca7923
      @judyfrasca7923 2 ปีที่แล้ว

      @@dperry428 Thank you for the information. I'll have somebody come out and take a look.

  • @debabratabiswas9696
    @debabratabiswas9696 4 ปีที่แล้ว

    I have a very old seth Thomas wall clock USA..watching red colour liquid inside of spring barrel from a glass area , what liquid is Red mercury !? Plz ans

    • @maxwellmark
      @maxwellmark 4 ปีที่แล้ว

      Marvel mystery oil is red...

  • @wanderingkurt
    @wanderingkurt 4 ปีที่แล้ว +6

    this is a bit like "servicing" your car engine by just topping the oil up. This clock needs a full strip down and clean before assessing if any bushes or pivots need attention. Only then should you apply new oil.

  • @showandgo
    @showandgo 4 ปีที่แล้ว +1

    I have the same clock, after oiling and rechaining my clocks is now running backwards, any thought?

  • @shawnsanborn2057
    @shawnsanborn2057 3 หลายเดือนก่อน

    One thing for certain. I will just call the clock man!

  • @sheilalarkins6759
    @sheilalarkins6759 2 ปีที่แล้ว

    what to do when the clock won't keep running stops every 5 minutes?

  • @sandraevans9510
    @sandraevans9510 3 ปีที่แล้ว

    My pendulum stops after a few minutes.can you help me.

  • @precinct1baltimorecountyre588
    @precinct1baltimorecountyre588 2 ปีที่แล้ว

    And is sister from computer good to clean out dust????

  • @jonasmarucha
    @jonasmarucha ปีที่แล้ว

    Where did you get the oil?

    • @wayner806
      @wayner806 10 หลายเดือนก่อน

      Amazon has it

  • @DanKunkel-ff1kq
    @DanKunkel-ff1kq 7 หลายเดือนก่อน

    Great info!

  • @bread2032
    @bread2032 4 ปีที่แล้ว

    thank you

  • @williamgould5916
    @williamgould5916 2 ปีที่แล้ว

    Damn, didn't show me nothing. I'm not much on sign reading, nevered learned it.

  • @MrRoger507
    @MrRoger507 9 หลายเดือนก่อน

    Great info.

  • @mosfet500
    @mosfet500 3 ปีที่แล้ว

    I bought Liberty oil for clocks and I bought general purpose Liberty oil. I sent an email to Liberty and said, "hey these are both the same!" Liberty never got back to me. Also I use several different oils and greases on clocks just like I do on watches - everyone should.
    I think I may have fixed a couple of clocks you worked on, then again lots of people use your method....

  • @leonpatterson7192
    @leonpatterson7192 4 ปีที่แล้ว

    How do you get side glass out

    • @shawnmcnece2368
      @shawnmcnece2368 4 ปีที่แล้ว

      I think it varies by model what type of grandfather clock you have. I’ve seen some with a little cloth than glass. But to remove the glass panels, I there’s little clips on the inside of the clock where the glass panel is held in place.

    • @shawnmcnece2368
      @shawnmcnece2368 4 ปีที่แล้ว

      Here’s a little video on how to remove glass panels from grandfather clocks. This might be for Howard Miller, but I know that this would also work for other models of grandfather clocks. th-cam.com/video/71UtTybSS6c/w-d-xo.html

  • @jimswanny1193
    @jimswanny1193 3 ปีที่แล้ว +1

    Don’t listen to the comment about the WD40, it is a really good agent to break down the old oil that was probably put in 20 years ago or your clock would still be running , adding new oil without cleaning the old grime out will not help your clock run. WD40 used correctly will clean then you must wipe away any old residue, after its clean from old grime use clock oil to keep your clock running perfectly. Don’t forget, you must clean it every 4 to 5 years and reapply oil.

    • @deanlapinel3985
      @deanlapinel3985 2 ปีที่แล้ว

      Never Never Never use WD-40 on a clock. It is not a lubricant. It dries hard and ruins our clock cleaning solutions in one shot. So again...please do not use WD-40.

  • @bijankumar2922
    @bijankumar2922 3 ปีที่แล้ว

    Liberty oil-------where shall I get it. In India it is not available.

  • @-MOS-
    @-MOS- 2 ปีที่แล้ว

    Your two videos on this were a gift! Thank you!!

    • @mariav4288
      @mariav4288 2 ปีที่แล้ว

      Can you link to the other video? I can’t find it

    • @-MOS-
      @-MOS- 2 ปีที่แล้ว

      @@mariav4288 here you go and good luck! th-cam.com/video/dDTqYsYqFSM/w-d-xo.html

  • @anthonycardenas9177
    @anthonycardenas9177 ปีที่แล้ว

    Too bad, many (recommended) lube 'points' can't be seen or are 'blocked' by a human hand? Now they still remain a mystery? Also failed to specify what NOT to lube?

  • @vintagesimplexfirealarmsof6440
    @vintagesimplexfirealarmsof6440 4 ปีที่แล้ว

    i got a e ingrahm 1879 gengerbread clock thats covered in dust

  • @scrunchymacscruff1244
    @scrunchymacscruff1244 2 ปีที่แล้ว

    Very intuitive, but 'intuitive' is scary if you don't have a road-map. Thank you.

  • @theray2009
    @theray2009 4 ปีที่แล้ว

    Your clock?

  • @garyballard723
    @garyballard723 4 ปีที่แล้ว +4

    WD 40 is not really a lubricant

    • @SumProject18
      @SumProject18 4 ปีที่แล้ว +1

      So I've noticed...

    • @funmygy
      @funmygy 4 ปีที่แล้ว +1

      Thanks again for the first time in the UK. we have to do it for the first to see the 50th birthday party.

  • @alexoshhh
    @alexoshhh 4 ปีที่แล้ว

    Its still very slow but good job on getting it to go

  • @ThreePhaseHigh
    @ThreePhaseHigh ปีที่แล้ว

    Wait a minute you mean I should’ve use STP

  • @Cobesclocks
    @Cobesclocks 5 หลายเดือนก่อน

    That compressed can of air did absolutely nothing all the gunk is hidden and that oil will mix in with the gunk and create a sand paper mixture to sand down the pivots causing more damage to the clock just take your clock to a clock shop!

  • @TH3_ST4ND4RD
    @TH3_ST4ND4RD 2 ปีที่แล้ว +1

    Thanks for that. Going to do that shortly on my clock, and was great to see how to disassemble this. One thing I'll add is make sure when you adjust time that you rotate the minute hand COUNTER-clockwise always. That's per the manufacturer if memory serves.

    • @johnjones600
      @johnjones600 2 ปีที่แล้ว +4

      The paperwork for my 1980 Ethan Allen Grandfather clock says to only turn the hands clockwise.

  • @firealarm2903_
    @firealarm2903_ 4 ปีที่แล้ว

    Is that your clock?

  • @ronaldspencer547
    @ronaldspencer547 2 ปีที่แล้ว

    Thats the problem with the old genuine grandfather clocks. They need oil about each year. Its cheaper and more reliable to get a quartz movement with simulated chimes but its not the real thing even though its hard to tell the difference.

    • @ronaldspencer547
      @ronaldspencer547 2 ปีที่แล้ว +1

      @@dperry428 I have a Howard miller nicea mechanical clock with a kieninger sks 15 movement with 116 cm pendulum I bought in 2017. I have had to replace the movement twice in 5 years. I bought the clock to replace a Chinese crosley small grandfather clock with an electric movement that had the same movement for 15 years before I donated the clock after buying the mechanical one.

  • @winterhalder_9801
    @winterhalder_9801 ปีที่แล้ว

    It isn't enjoyable when the same note of chime rods is being stroked hard by the hammers.

  • @nigeldean7269
    @nigeldean7269 3 ปีที่แล้ว +2

    A good way of wearing the clock out especially when he mentions WD40

    • @roninscholar4515
      @roninscholar4515 3 ปีที่แล้ว +1

      he said NEVER use wd-40

    • @judyfrasca7923
      @judyfrasca7923 3 ปีที่แล้ว

      @@roninscholar4515 I used WD without knowing not to, but my clock is fine.

  • @bobloblaw7879
    @bobloblaw7879 3 ปีที่แล้ว +20

    sorry, but that's a hack job. You cannot properly clean or lubricate a watch or clock without disassembly. You actually shorten the life of it because all the dirt crud that settles on it gets turns into a nice lapping paste with the new oil. Read a 101 book on clock servicing or leave to those who know.

    • @ericnorteman5341
      @ericnorteman5341 ปีที่แล้ว

      I fully agree anyone thinking of using wd40 on a clock works should stick to cattery

  • @derekr7814
    @derekr7814 ปีที่แล้ว +1

    PLEASE FOLKS DO NOT FOLLOW THIS ADVICE. IT IS WRONG AND HE IS NOT A PROFESSIONAL!!!!

  • @lydiaahubbell8545
    @lydiaahubbell8545 11 หลายเดือนก่อน

    sounds out of tune, still! that one closest to the face

  • @niemolens
    @niemolens 9 หลายเดือนก่อน

    Stupidity has no borders, this is an insult to any real clock-restorer / repairer

  • @ClockFixer
    @ClockFixer 4 วันที่ผ่านมา

    Terrible!

  • @MrBothandNether
    @MrBothandNether ปีที่แล้ว

    Watches as this guy winds the second hand, clock wise

  • @arslanahmed8504
    @arslanahmed8504 3 ปีที่แล้ว

    Thank you