Kutzall Burr Kits: kutzall.com/?aff=22 Use Promo code for 5% off certain Kutzall products: CCREATIONS • Get my FREE Woodcarving eBook ➡ howtowoodcarve.com • Woodcarving Project Idea Guide eCourse: corneliuscreations.gumroad.com/l/inqzE • Carving Templates: www.howtowoodcarve.com/shop
I've ordered a ball nose rotary burr and a coarse shaping disc. Everyone that has used those tools is super satisfied so i can't wait to try them out myself. Your review was quite helpful thanks
Late to the party, Matt, but I see you've taken some flack on this video. You're such an upstanding guy. You model the very best in handling negativity. I may not be here because I'm going to run out and buy the tools you obviously love, but you deserve all the support in the world. The internet would be a much safer and productive place if everyone could answer the hurtfullness the way you have/do. All the props to you.
I have found wearing a leather glove on my non carving hand will keep the burr from making hamburger meat out of your fingers and hands, should you accidentally slip. The burr tends to scuff and run over the leather, saving your hand and keeps the shaft from breaking since it doesn't get caught. 👍
I'm very pleased with this model… th-cam.com/users/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR great addition to my existing Dremel arsenal of tools and accessories. The convenience of portability is great and makes me wonder why I waited so long to go cordless.Plenty of power, battery longevity is fine. It's a bit large and feels a little bulky at first...especially since I normally use my corded models with the flexshaft accessory), but it's really not a problem. I got used to the larger size pretty quickly and haven't experienced any fatigue while using it (have only used it for about 10 minutes per "session").I'm impressed with this unit and can confidently recommend it for both light and heavy-duty tasks. Seems to be high-quality and on par with my corded models as far as performance is concerned.
Hi! I've only had the dremel 4250 for two months and it's already broken. I've tried to repair it but it's not possible. i'm asking myself to buy new one (or different model and which one ?) but after this 1st experience i'm not confident. What do you think/any advice for wired one ? 🙏🙏 I work mainly with solid wood, only on small pieces like dry flowers vases, plates, spoon and contemporary sculpture.
@@CorneliusCreations I make dolls. I could send a picture if you are interested. Eventually, when my husband retires, (it's his name on this account) we will be doing more furniture and I especially want to make a carved Art Nouveau mirror.
@@CorneliusCreations 👌🏻 That’s why I asked, your so passionate about their products and it’s good to know that’s because you rate the products and the quality rather than they are giving you sponsorship to say it. Always means more to me anyway if it’s because you love the product, if that makes sense?
It makes total sense. Only a few products makes its way into my channel. I get many emails everyday! This video was from a content perspective and passion perspective. Thank you so much for your support!
@@CorneliusCreations to me, that’s the ONLY way it should be. Because you love the product. Maybe include that in the video in future? “I’m not being sponsored I’m telling you about this because I love it.” And being affiliated and sponsored are two very different things. I only asked because you were so passionate about it in how you talked about the items! Good to know it’s because you are!! Rob
Why call someone a liar. Wheres your evidence? Not very honourable to be saying that in public. Your opinion on the content is your opinion fair enough. But the quality of the video didnt happen by accident or in a couple of spare minutes. Maybe one of those times when its better to apologise and be a man.
Thank you, I thought my video was transparent, I definitely wasn’t paid for this video. It was honest content for my channel I thought others would find valuable. I appreciate your support!
I have watched many of your vids. All for free! I appreciate that you let me access your knowledge, as a complete stranger. For no charge. You deserve a thank you and some respect in my opinion. I have a few kutzall burrs after watching yourself & others. They take the bulk of wood away PDQ. Saves me a lot of time making my kindling. :)
Kutzall Burr Kits: kutzall.com/?aff=22
Use Promo code for 5% off certain Kutzall products: CCREATIONS
• Get my FREE Woodcarving eBook ➡ howtowoodcarve.com
• Woodcarving Project Idea Guide eCourse: corneliuscreations.gumroad.com/l/inqzE
• Carving Templates: www.howtowoodcarve.com/shop
"OMG! Thank the heavens for Kutzall and it's ingenious invention of this radical cutting edge pine-cone shaped design!!" *Sarcasm is over 9000*
Do you need a hug? Come here big guy!!! 🤗
I've ordered a ball nose rotary burr and a coarse shaping disc. Everyone that has used those tools is super satisfied so i can't wait to try them out myself. Your review was quite helpful thanks
Late to the party, Matt, but I see you've taken some flack on this video. You're such an upstanding guy. You model the very best in handling negativity. I may not be here because I'm going to run out and buy the tools you obviously love, but you deserve all the support in the world. The internet would be a much safer and productive place if everyone could answer the hurtfullness the way you have/do. All the props to you.
Transparency Notice* I wasn’t paid for this video. I love Kutzall products and I stand behind them 100% :)
I'm considering trying my hand at carving some chunky floral designs into some posts/pillars and this has me wanting to practice power carving!!
I have a few of them plus shaping discs awesome tools and this new combo packs looks absolutely 👌 great . Thank you Sir 🙏
Glad you like it! Hopefully I will get to a tutorial soon!
@@CorneliusCreations ❤️
I have found wearing a leather glove on my non carving hand will keep the burr from making hamburger meat out of your fingers and hands, should you accidentally slip. The burr tends to scuff and run over the leather, saving your hand and keeps the shaft from breaking since it doesn't get caught. 👍
I'm very pleased with this model… th-cam.com/users/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR great addition to my existing Dremel arsenal of tools and accessories. The convenience of portability is great and makes me wonder why I waited so long to go cordless.Plenty of power, battery longevity is fine. It's a bit large and feels a little bulky at first...especially since I normally use my corded models with the flexshaft accessory), but it's really not a problem. I got used to the larger size pretty quickly and haven't experienced any fatigue while using it (have only used it for about 10 minutes per "session").I'm impressed with this unit and can confidently recommend it for both light and heavy-duty tasks. Seems to be high-quality and on par with my corded models as far as performance is concerned.
yep!
I really injoy watching your video.. take care buddy
Glad you enjoyed
I’ve been looking at these for my mum as she does carving but they are stupid expensive, do cheeper rotary rasps work ok?
I like the BIG gold set.
Yeah it is amazing!
Great video as always buddy!
Thank my man!
Hi! I've only had the dremel 4250 for two months and it's already broken. I've tried to repair it but it's not possible. i'm asking myself to buy new one (or different model and which one ?) but after this 1st experience i'm not confident. What do you think/any advice for wired one ? 🙏🙏
I work mainly with solid wood, only on small pieces like dry flowers vases, plates, spoon and contemporary sculpture.
Awesome video brother!
I got a 2 in 1 special from you haha. Thank you bro!
Hallo from Greece.. all sizes do for dremel???
what size should i get??? Thanks you
Is it suitable for dremel? And do i need a y special stuff?
Might have to get me a foredom just to use that giant sphere burr.🤣. Almost got the whole range of 1/8s they are awesome 👌
Haha right on!
Will these burrs work with Dremel Lite 7760 4V? Does the shaft size matter (1/8" vs. 1/4")?
Oddly enough....no one ever seems to answer this question.
Hello Matt, sure is some mean bits. It wouldn't take much time cutting away unwanted wood. Thank you and Bless you Matt
Good to hear from you, Ed!
Can these burrs be used with deer antlers?
I probably would use a carbide cutter instead of these…
How to order
Sir iam from India ....me and my father coconutshell tea cup designers ...which rotary best for coconut shell work sir ...please tell me sir
What carver are you using? Would it work with bone?
Thxs
I am using the Foredom, I don’t recommend these bits for bone unless you need deep cuts!
I use mine on hardwoods like walnut or maple.
I would love to see some of your work!
@@CorneliusCreations I make dolls. I could send a picture if you are interested. Eventually, when my husband retires, (it's his name on this account) we will be doing more furniture and I especially want to make a carved Art Nouveau mirror.
how much
Kutzall is some nice shit. Any of their burrs would make a great gift
They are very nice!
Hola amigo. Dónde se puede comprar esa caja??
Hello my friend! Check the links above!
Великолепно ! 👍🙏
Thank you!
It looks like you are using a flex shaft with a Dremel but it is 1/4". am I right and if so, a link?
Can’t order I live in Austria😢😢😢
There are these kutzall or sabertooth but the cheap Chinese ones are not very good in my opinion
✌️👷♂️super
Thank ya!
Ordered my burrs, but didnt use the code because when i did, free shipping disappeared. Sorry.
This is an advertisement for the product not a review.
I been using Kutzall products for years, Adam. I stand behind them 100% I wasn’t paid for this video.
No dude, this is a straight forward review of fantastic carving burrs.
Kutzall is known far and wide as a must-have tool for power carvers. I'd be more surprised if he DIDN'T use them.
Is this a sponsored video?
No, I promote a lot of different brands I use. I hold affiliation with Kutzall, but this isn’t a sponsored video.
@@CorneliusCreations 👌🏻
That’s why I asked, your so passionate about their products and it’s good to know that’s because you rate the products and the quality rather than they are giving you sponsorship to say it. Always means more to me anyway if it’s because you love the product, if that makes sense?
It makes total sense. Only a few products makes its way into my channel. I get many emails everyday! This video was from a content perspective and passion perspective. Thank you so much for your support!
@@CorneliusCreations to me, that’s the ONLY way it should be. Because you love the product.
Maybe include that in the video in future? “I’m not being sponsored I’m telling you about this because I love it.” And being affiliated and sponsored are two very different things.
I only asked because you were so passionate about it in how you talked about the items! Good to know it’s because you are!!
Rob
@@robjustaguy great advice!
Awesome review! Question please: can the "golden sphere" burr be used for hard wood?
Thank you! It sure can!
Why is the "free" e-book $14.95?
Go to howtowoodcarve.com and put in your email.
@@CorneliusCreations Thank you. The site was a bit confusing to an old man like me. 🙂
@@CorneliusCreations By the way. I really enjoy your channel. You make it very easy to follow along.
They're too expensive...theres plenty of cheaper options that work perfectly
Why call someone a liar.
Wheres your evidence?
Not very honourable to be saying that in public.
Your opinion on the content is your opinion fair enough.
But the quality of the video didnt happen by accident or in a couple of spare minutes.
Maybe one of those times when its better to apologise and be a man.
Thank you, I thought my video was transparent, I definitely wasn’t paid for this video. It was honest content for my channel I thought others would find valuable. I appreciate your support!
I have watched many of your vids.
All for free!
I appreciate that you let me access your knowledge, as a complete stranger.
For no charge.
You deserve a thank you and some respect in my opinion.
I have a few kutzall burrs after watching yourself & others.
They take the bulk of wood away PDQ.
Saves me a lot of time making my kindling.
:)