no problem, i will always explain how i do something because i dont like it when people post a video and dont explain how they did it, they just show rhat they did it
@jeffdedrick2312 i got them from a hobby store in next town over but you can find factory spacers on any axial rc extra parts trees and you can very easily find a assorted pack of aluminum spacers like the ones i used on Amazon/Ebay
I used to watch Lee Majors in the Fall Guy. Great show and the blonde girl was beautiful too. Heather Graham was her name if I'm remembering correctly. Never saw her do any other TV shows or films again after that. Colts truck was a GMC though. Strange I remember that but here in Australia as a kid I had never heard of GMC. It was General Motors Chevrolet wasn't it? Yeas this build from Jesse Bussinger looks awesome 👌👍
@@yvesstocky9936 I got the girls name wrong from the show "The Fall Guy " with Lee Majors as the stunt man. The blonde girl she was gorgeous her name is Heather Thomas . She says she had to leave acting because of stalkers breaking into her home and had to relocate to a new town and quit acting because she wanted to start a family and needed some privacy. Quite understandable too. The paparazzi are bad enough but random stalkers and psychopaths are even worse.
Beautiful truck Jesse i love it man. Ive got the exact same truck in metallic brown although i fitted the 1.9 inch wheels from the Landrover Defender. Do you know if the Traxxas titan 12 or maybe 14 turn brushed mitor will work to get a little bit extra speed? When Traxxas says the stock 21 turn titan is reversed rotation is that just reversed wiring? Like if i got a normal motor thats not reversed rotation and then reversed the polarity can it be made to work? I believe this is because the portal axkes reverse the direction of axle rotation so a reversed rotation motor was required to remedy this. Thats a really nice great looking truck Jesse 👍👌
as far as i know you can run any motor but youll have to play with reversing the wires, all though i would have to say ghe hobby wing fusions work really well with the trx4s especially on 3s. hope this helps and thanks for the comments 😊
Not really that hard to do though. If Traxxas used just normal Lexan paint it's only a matter of using some Tamiya polycarbonate Lexan cleaner to remove the pain carefully without scratching the Lexan. It might require a few tries but should work. Then simply remove the decals. But then you probably will have to make up a scale interior too. Otherwise your just going to be looking at the chassis and battery and electronics. I don't think the black windows look that bad though.
Very nice and you did an excellent job detailing what it took to move the servo to the axle.
Best looking F150 I’ve seen yet
thank you ill have to do a video showing it with the new tires and wheels
Thanks for explaining the SOA properly. It’s definitely something I’d like to do 👍
no problem, i will always explain how i do something because i dont like it when people post a video and dont explain how they did it, they just show rhat they did it
Looks good! Yes brown for the win. I shoulda gone with that cream decal on mine too. I got a few cool upgrades done to mine as well you might like.
Good stuff! Loked and subbed brother! I have the K10 but just ordered the brown f150 for my wife.
Nice job! Showroom Hobbies is the name for the decals btw.
really?! ill have to check that out, thanks
Excellent video
The build looks incredible.
thanks! ill have a video soon showing the wheel/tire combo on it
This is beautiful 👌💪
I copied your paint scheme because I love it so much
Nice 💯👍🏾
Nice looking ford truck
Thanks 👍
Very Nice, that's spectacular!
thank you, got the new wheels and tires on so ill post a short soon to show what it looks like now
Great job, where did you get the spacers?
@jeffdedrick2312 i got them from a hobby store in next town over but you can find factory spacers on any axial rc extra parts trees and you can very easily find a assorted pack of aluminum spacers like the ones i used on Amazon/Ebay
Honorable mention is in Your Future🎉
Looks good
Another question, are the 2 speed and diff servos rated for 7.2 also or is that eventually gonna cause a problem having the esc turned up to 7.2?
im not sure honestly but ive seen people run the big 2.6 monster truck tires on trx4s with no issues
What number is that? Wanna try it on my K10.
Did the stock micro servos work ok with 7.4 volts?
i never tried that actually, but im sure it still wouldn't perform as well as a decently powered aftermarket servo. ill have to test that one day.
Looks good. I don't think the cheyenne comes with a roll bar only the ford comes with it. The k10 has to be bought for the cheyenne.
The 1/10 K10 doesn’t but the 1/18 K10 does have the bar. I’m deleting it from my TRX4m
Nice set up… Just a little fyi…
One Mil = .001
One MM = .0394 👍🏻
Colt Seavers!
I used to watch Lee Majors in the Fall Guy. Great show and the blonde girl was beautiful too. Heather Graham was her name if I'm remembering correctly. Never saw her do any other TV shows or films again after that. Colts truck was a GMC though. Strange I remember that but here in Australia as a kid I had never heard of GMC. It was General Motors Chevrolet wasn't it? Yeas this build from Jesse Bussinger looks awesome 👌👍
@JimbobJames-n2p thank so much man happy crawling😊
@@yvesstocky9936 I got the girls name wrong from the show "The Fall Guy " with Lee Majors as the stunt man. The blonde girl she was gorgeous her name is Heather Thomas . She says she had to leave acting because of stalkers breaking into her home and had to relocate to a new town and quit acting because she wanted to start a family and needed some privacy. Quite understandable too. The paparazzi are bad enough but random stalkers and psychopaths are even worse.
Beautiful truck Jesse i love it man. Ive got the exact same truck in metallic brown although i fitted the 1.9 inch wheels from the Landrover Defender. Do you know if the Traxxas titan 12 or maybe 14 turn brushed mitor will work to get a little bit extra speed? When Traxxas says the stock 21 turn titan is reversed rotation is that just reversed wiring? Like if i got a normal motor thats not reversed rotation and then reversed the polarity can it be made to work? I believe this is because the portal axkes reverse the direction of axle rotation so a reversed rotation motor was required to remedy this. Thats a really nice great looking truck Jesse 👍👌
as far as i know you can run any motor but youll have to play with reversing the wires, all though i would have to say ghe hobby wing fusions work really well with the trx4s especially on 3s. hope this helps and thanks for the comments 😊
Thank you!!!!
windshield glasses and side windows have to be transparent !
Not really that hard to do though. If Traxxas used just normal Lexan paint it's only a matter of using some Tamiya polycarbonate Lexan cleaner to remove the pain carefully without scratching the Lexan. It might require a few tries but should work. Then simply remove the decals. But then you probably will have to make up a scale interior too. Otherwise your just going to be looking at the chassis and battery and electronics. I don't think the black windows look that bad though.