Repair your Mazda CX 7 power window motor
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2024
- How to crack the motor casing open and install the new gear inside the motor. To remove the door panel and get access to the motor please watch this video........ • Mazda CX7 Window Regul... . He has a detailed explanation on door panel removal.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
We bought the kit with the motor. My husband was convinced that it was the gear so he only replaced the motor and gear box and sure enough it worked! We could have saved more than $100.00 by just buying the gear. Also, the complete set is half the price online.
Found one tooth broken off and jammed . Removed works fine (for now )
Thank you
Thank you so much. I used your video and others to repair our window. Your mother raised you right. Good job!
Thank you! I'm glad it was helpful for you.
Great advice on using a wood chisel to pry the casing apart. Thanks for posting.
Thanks! I have replaced the gears on every window on my Mazda CX 7 this way. They all stripped out within a 10 year time period. The 1st one broke just after the warranty ran out. The dealer cost was outrageous.... Never again. Now I can fix my own for roughly $7.00 to $8.00. And you can too! Good luck!
@@Galb1BlueLeader Ours failed on the drivers door - dark blue car exposed to the harsh Australian sun always parked outside for 12 years. There is a lot to be said for light coloured cars! Regards.
This was really helpful. I fixed this for my wife today. Thanks.
Finally I receive the part , and replaced successfully
Thanks you very much
Thank you for this video. It was very helpful!
Thank you. That was great !
Thank you for posting this!
Thank you for the video. I’d like to give some info. There are 2 tabs that you can pull so you can break the motor apart without brute force. Just saying lol
I found that in almost every case I cracked open the 2 tabs snap off from plastic dry rot anyway. But the bolts that attach the motor to the door frame also hold the casing together so it doesn't matter. Thanks for the tip though 👍😁.
Great video what is that part called
Since i have not torn it apart yet I would like to know is it usually or always the gear you showed needing replacing? Do the other gears ever strip? So if the others don't i would just need the one gear, correct? thanks
In every single motor I've taken apart this far it is ALWAYS the large gear teeth that are stripped out. I have yet to find a small gear that is stripped..and I've never spent a penny on buying the package with the smaller gears in them. Hopefully yours is the same, but they are all easily replaced if there's more than one. The larger gear is thinner and therefore is usually the culprit when the window stops working. Hope this helps.
@@Galb1BlueLeader thanks for this video. I finally got my part in and tore my door apart and the broken gear looked exactly like your broken gear. I replaced it like you showed and the rubber didn't seat as well with the new part so used the old part to sit on the rubber to sit on the new gear and it seated perfectly. Up and running. Thanks for the tips on opening the motor gear cause I can guarantee I would have broken it without seeing your video..
It seems unlikely that the regulator would break before the gear strips out.
I screwed mine up. I had no idea how brittle the plastic was going to be. One of the tabs broke completely off. I tried looking for the plastic cover and I don’t know of it exists. Now, I’m going to have to purchase a new one.
I'm sure that just the two tabs will be enough to hold the motor to the door frame, of course still use all 3..it may still be helpful. As long as you replaced the stripped out gear inside I would definitely try it before purchasing a whole new motor. It's worth a shot!
@@Galb1BlueLeader Thank you! I was thinking about that. I don’t think this requires a lot of force to get it to stay in place. I might be able to place the broken tab back over the hole and then place a washer over that with just enough pressure to keep it snug . 👍
@@Galb1BlueLeader It was a success! I just used the 2 bolts to hold both the top & bottom part of the case and the third is holding the bottom half of the case & the window is rolling up and down just fine. Is actually moving a little faster than the passenger front window. Thanks
Do you have a link to where you purchased the gear?
www.amazon.com/dp/B07MH496QS/ref=cm_sw_r_other_apa_i_a.4HDb4G0893F
www.amazon.com/dp/B00VYTDD3C/ref=cm_sw_r_other_apa_i_J44HDb4SVS0C4
How long is it broken again?
Once I fixed all of my windows they'll last 2 or 3 years of heavy use. Obviously longer if you use your air conditioner alot and don't roll your windows up and down all of the time. It's worth fixing.. DON'T TAKE IT TO A DEALERSHIP. THEY WILL RIP YOU OFF! My first broken window motor cost me almost $500 at a dealership. After that nightmare I've fixed all my other motor gears myself. It's really easy. Save your money 😁.
Is it equal to cx5?
@@bayurizkylintangaditya5221 I don't own a CX 5 but other people are telling me that yes.. the repair is the same on the CX 5 as well as the CX 7.
@@Galb1BlueLeader i mean the gear, is it equal to cx 5?
Thank you bro
Where can i get the GEAR
plz?
Power Window Lift Regulator Motor Gear Repair Kit Set Replacement for Mazda 3 Sport 5 6 CX-7 CX-9 RX-8 (1 Set - 6 Pcs) www.amazon.com/dp/B07MH496QS/ref=cm_sw_r_other_apa_i_a.4HDb4G0893F
www.amazon.com/dp/B00VYTDD3C/ref=cm_sw_r_other_apa_i_J44HDb4SVS0C4
It's usually only the bigger gear that strips out so that may be the only gear you need. But they have the entire set in case you find more damaged ones inside.
Thank You very much
Below are the links used to purchase the single gear or gear set!
Camera angle didn't show what you were described most of the time.
www.amazon.com/dp/B00VYTDD3C/ref=cm_sw_r_other_apa_i_J44HDb4SVS0C4
www.amazon.com/dp/B07MH496QS/ref=cm_sw_r_other_apa_i_a.4HDb4G0893F