It is way way overpriced I wish I could see one I would copy it a little and sell it for 250.00 this company need put out of business and I might do it
I love the pride you have in you have in your product. I just picked up a used Wilco but I already am thinking of getting rid of it. The pin that you need to pull to open the "gate" is a total pain and worse, there is still some wobble from left to right. I think this is the replacement.
@@billybritt5334 It's not lost on me that this costs simlar to a replacement bumper, however, a replacement bumper is permanent and resale depends on the buyer appreciating my taste. The detachable "tire holder" can be resold to people with the savy to understand that fact.
Have you made or can you make one to fit a '07 Toyota Sienna. I'd love to get to my spare tire easily without having to crawl underneath to get the spare out when having a flat.
Hello. I need this item for the tire of my 2019 Toyota Rav Four. I will travel to San Antonio Texas. I'm from Mexico City. I also need the ladder. Do you have a distributor in San Antonio Texas? If he sells it to me, is it installed? Thank you! Antonio Balderas
You guys should really look into making this for hitches that are not open towards the front of the vehicle. If you flipped that bolt to tighten from the front for the anti rattle, it'd make the product pretty perfect. That's what stopping me from getting one.
That has it's own issues - the hitch pin obstructs the long socket extension, tightening the wedge w/o the pin shifts the insert making hole alignment challenging. th-cam.com/video/Of0qxOw_sBw/w-d-xo.html
I just happened to come across this video, that’s my trek in the video lol. I just pulled power from the passenger side tailight. So when the headlights are on, the license plate light kicks on.
Made in America, I support that. If you have a vehicle that don't have much aftermarket support. You probably won't find anything else other than this product or the other two, Ridgid and Wilco. For example, I have a 2014 f150. Even though they have a good aftermarket or front bumper they don't have any swing out solution for your rear bumper.
@@traviskimbrell1209 ahhh you need the exact question because you couldn’t understand what I might be asking! So here it is! Will this hold a 38x12.5 nitto ridge grappler that I am considering for my gladiator 😉 try to figure my options 😎 let me know if it’s cleared up Travis! I can go slower if needed 👍
Companies will put the maximum capacity or capability for liability as I have understood in the past! Looking for people who may have found it will work fine???? Or know of a larger option and might point me in that direction?
Very nice unit , it's unfortunate that you don't reply to my email sent to your technical support address on your site . I cannot have any answer to a few questions , and it make me uncomfortable about your customer service .
The astronomical price and the 8 week lead time is absolutely ridiculous. Went with Wilco and couldn’t be happier
$1800!? That’s absolutely nuts!!!
It is way way overpriced I wish I could see one I would copy it a little and sell it for 250.00 this company need put out of business and I might do it
@@billybritt5334 " I would copy it" Free labor from the man that put in the time and effort to engineer this is just theft.
What else is out there with all the features, USA made, replaceable parts and transferable lifetime warranty?
@@CorkKNIFE Still over priced
@@rdgld2008 For you, also for me, but is it overpriced to the user that has a $90,000-$200,000 truck?
The market will decide.
I need one of these for my Outback Wilderness.
My thoughts exactly lol, but I'll need to add in the extra arm and extension for my bike rack.
The website states tthat I have to contact them for pricing. I really hate that, I'd rather be shocked without going thru an additional work.
TOTALLY agree with this statement. And it's kind of weird that the manufacturer is different than the company doing the selling.
1800 for the smallest they kiss my ass I'll copy that and make it for less then 300.00
The smaller one will carry up to a35 inch tire is only 1800 😂😆
I love the pride you have in you have in your product. I just picked up a used Wilco but I already am thinking of getting rid of it. The pin that you need to pull to open the "gate" is a total pain and worse, there is still some wobble from left to right. I think this is the replacement.
I give you 100.00 for your used one that you don't like then you can put 1700 with the 100 I gave you and buy this fine tire holder. 😆 But really
@@billybritt5334 It's not lost on me that this costs simlar to a replacement bumper, however, a replacement bumper is permanent and resale depends on the buyer appreciating my taste. The detachable "tire holder" can be resold to people with the savy to understand that fact.
@@bschuske 😂
They come down to a realistic price yet?
What about the back up cam?
great demo, thanks!
For that price, you could buy a complete bumper with swing out tire carrier!
On certain platform that has a strong following. I couldn't find any for the 2014 f150. This was the only solution.
2006 Nissan Xterra off-road, how much boss for tire carrier thank you
Have you made or can you make one to fit a '07 Toyota Sienna. I'd love to get to my spare tire easily without having to crawl underneath to get the spare out when having a flat.
Hello.
I need this item for the tire of my 2019 Toyota Rav Four. I will travel to San Antonio Texas. I'm from Mexico City. I also need the ladder. Do you have a distributor in San Antonio Texas? If he sells it to me, is it installed? Thank you!
Antonio Balderas
Camera relocation?
But I can't mount a dual Jerry can?
Would you guys ever ship to the UK?
How does that effect the reverse camera?
You guys should really look into making this for hitches that are not open towards the front of the vehicle. If you flipped that bolt to tighten from the front for the anti rattle, it'd make the product pretty perfect. That's what stopping me from getting one.
That has it's own issues - the hitch pin obstructs the long socket extension, tightening the wedge w/o the pin shifts the insert making hole alignment challenging. th-cam.com/video/Of0qxOw_sBw/w-d-xo.html
Love this. Gotta have one!!!!
Ordered one for my CrossTrek, how did you wire the license plate light?
I just happened to come across this video, that’s my trek in the video lol.
I just pulled power from the passenger side tailight. So when the headlights are on, the license plate light kicks on.
Will this fit a 2006 Honda Element?
I like it
NICE!!!!!!. Do this will fit a toyota sequoia?, how much it cost?
I’m pretty sure it will. But contact the company to make sure. And it’s around $1,800
What if you have a rear view camera? Doesn't it interfere?
It will yes interfere.
I better be able to drive that tire holder for 1800 😂😆
even more expensive than rigd... wow. that morse code tax is crazy.
Really cool. But, $1750? Come on.
Right
Made in America, I support that. If you have a vehicle that don't have much aftermarket support. You probably won't find anything else other than this product or the other two, Ridgid and Wilco. For example, I have a 2014 f150. Even though they have a good aftermarket or front bumper they don't have any swing out solution for your rear bumper.
@@UnfiItered I run the RigD UltraSwing now. Love it.
Way way way overpriced I would not give a dime over 300
Why did I think this product was priced right. It cost more than the most popular tire swing. Okay, cool.
I ordered one, months later, still never shipped and blocked. No refund or anything. DO NOT BUY
Will it handle a 38” gladiator tire?
@@traviskimbrell1209 ahhh you need the exact question because you couldn’t understand what I might be asking! So here it is! Will this hold a 38x12.5 nitto ridge grappler that I am considering for my gladiator 😉 try to figure my options 😎 let me know if it’s cleared up Travis! I can go slower if needed 👍
Companies will put the maximum capacity or capability for liability as I have understood in the past! Looking for people who may have found it will work fine???? Or know of a larger option and might point me in that direction?
@@jimmierpadgettjr th-cam.com/video/BfhDSZsu7m0/w-d-xo.html
Very nice unit , it's unfortunate that you don't reply to my email sent to your technical support address on your site . I cannot have any answer to a few questions , and it make me uncomfortable about your customer service .
Go to website it's only 1800 lot of purebred idiots will pay that not mebI'm going to make my own and save 1600 lol lot of you idiots out there 😂
Is this thing made of pure titanium? Some other rare exotic material? You’re awfully proud of this at $1800
It’s nice but $1750 + tax + possibly shipping…
For rich people
So why the Morse code ??
Fare price for this is tops 400.00 not 1800
Overpriced junk, waited over 10 weeks to get and then fitment issues.
overpriced metal