The RS3M 2020 is a good cube with great performance. I like dry cubes. Corner cutting is good. And the turns are fast. The Monster Go EDU is like a Meilong 3M.
"The EDU was so fast that I had to focus much more on accuracy to the point that some solves I'd overturn and have a sloppy rest of my solve, where as the RS3M is just able to turn through whatever without any problems even when I feel like it shouldn't have... but since I spent more money on the EDU I'm gonna give that the point for turning flow."
I just purchased the EDU - my first cube since owning the original Rubiks Cube decades ago when i was a kid. I never even came close to solving that one - LOL. Now with the help of the internet, i hope to finally solve my first cube!
I've retired my RS3's in favor of the EDU. But then, I'm addicted to fast cubes. The only cubes faster are gonna cost a pretty penny with the GAN 11, 12, or 13.
I believe Monster Go EDU killed Gan 11 Air (if we consider that "alive"). Having magnets is much more preferred over customization. Even RS3M people have to add magnets.
Hey Cameron is the maru magnetic core kit coming to your shop? There are kits for the tornado v2, tengyun v1, yulong v2, wrm 2021, and the rs3m. I see it on a different shop but I would like to buy it from scs instead since shipping is fast.
I always go back to moyu cubes. I tried the gan 356m and the dayan tengyun v2 but i still prefer the wrm. Well that's untill i got the rs3m, which is more stable for the same corner cutting
the rs3m is better. literally every category rs3m won except in the "general feel" and "turning flow". What does that even mean?!? i feel like speedcubeshop is just trying to sell another cube. And i still dont understand how the weight of the cube is supposed to change the stability. Ive used both and the monster go is way too fast which makes the magnets feel weaker.
Hey…is there a possibility of the Zettaminx coming to your store I’ve been saving up but I’ve only found it on a competitors store but I’d prefer to buy it from you guys
Edu cost $12 and the swift block cost $13, they are targeted for beginners. Swift block is more blocky than the edu. Swift block has a tensioning system but not the edu, edu only has a screw only. Swift block has visible magnet but no magnet settings. They are both magnetic. I think the swift block is strong magnet than the edu because they are visible.
The EDU isnt really that bad. The magnets are amazing, its just that the cube is too fast lol but youll get used to it the more you use it though. Or, you can adjust the cube too.
I have both and many many more cubes so I can give my opinion on them. They are VERY different cubes. They are on like opposites. The EDU is the second fastest cube Ive used ever. Its faster than all but one of my maglev puzzles. The speed is comparable to the MoYu RS3 M Super V2 Maglev (my fastest cube). Because of this, it is a very unique cube. It feels like a maglev cube. On the other hand the MoYu RS3 M 2020 was very dry and sandy out of the box. It felt like it had a lot of friction and quite honestly was one of the worst feeling cubes out of the box for me. I immediately had to lube it (used lunar) and loosen it a bit (it was on tightest setting out of the box), which to me, is a bad thing since a bottle of lube is only a little cheaper than the cube itself, and begginer cubers probably dont want to lube and adjust a cube. After lubing it felt very average. I think moyu messed up by not including factory lube. Without lube, the sandy dry frictiony feeling will probably go away. The momster go EDU has stronger magnets while the MoYu RS3 M 2020 has rather weak magnets. One major thing for the monster go not discussed in the vid is the texture. I found the plastic on the monster go to be very slippery. Its probably the the cube with the least grip I own. The MoYu RS3 M is pretty standard with grip. The RS3 is probably better for cubers who are extremely new and dont know finger tricks since it will give more controll. The monster go might be better for someone whe can do basic tricks and already has some muscle memory.
Hy i feel a bit unsatisfied that scs has less price if rs3m and other puzzles than CUBELELO an Indian cube store. What can I say? A puzzle in your own country is more costly than a foreign country.
Wait so is a GAN a MoYu or is a MoYu a GAN. I’m confused lol. Edit: ohhh a fan is a MoYu rs3m killer lol Edit 2: Ok I’m confused again lol. So the rs3m is a gam killer?? I’m very confused. If I made anyone else confused I’m sorry lol I am a no brain.
@@rax1899 lol sorry if I confused you but here’s what I mean. I thought gan had released a new cube called the rs3m killer and they partnered up with MoYu to make it. But I just found out that what they are trying to say is that the gan KILLS the rs3m. Lol
Notice how SCS does the review differently than the cubicle. For the cubicle they just judge based on first impression while Cameron actually dives into more stuff about the cubes. That is why I love SCS way more than the cubicle.
doesnt it happen to you, that you buy a new phone, and emidietly in youtube theres videos about why youre phone sucks? WELL I JUST BOUGHT A FUCKING RS3M
@@SpeedCubeShopOfficial The corner cutting on the EDU is bad. It requires way too much force at normal angles and since most people aren't Clark Kent, it locks up a lot. Combine this with the insane speed of this cube and it's an even bigger problem. Why so fast by the way, what exactly is the benefit of being able to do a 360 by blowing on the top layer ? Totally useless. So why do I think you went soft on the EDU ? Because you didn't explicitly mention the corner cutting and because you considered the requirement for a "careful turning style" something good when it actually isn't. Being unforgiving is never good for a cube. With that said, I agree that these opinions are subjective. The EDU gets some criticism for being too rigid though, it's not just me...
I have the first edition of the monster go. And I kinda liked it with the ges system better. Always even tensions. On the other hand: screws are more difficult to take apart. So maybe a better choice for beginners. I don't know. It's a bit of a dilemma. Feel better soon!! 🙌🙌❤️
The RS3M is still the cube to beat, "turning Flow" ..making up new categories to make your unbiased opinion seem even More unbiased ..? Bad .CubeShop...... GAN is by far the maker of the best fastest most customizable cubes on the market ...That is True .... but ... It seems that your assessment of the EDU is wayyyyyyy more biased than you probably think it is .... I know. Because I have an original Monster Go, which is by no means an RS3M killer, But neither is this New Version .... that looks remarkably like my one ... although the internals my have changed slightly ... your assessment of needing to be more precise in your turning ... as a positive !!??? Is a flawed one .... Corner cutting ...every reviewers 'go to' feature (pardon the pun) is Never mentioned here ..... a must have !! ...according to Every reviewer i've seen ...... the RS3M is pretty good at corner cutting for a $9 cube .... how is the GO ?? if its anything like the earlier version ...and it appears so in your video .... Then No ... corner cutting is absent, because, in your own words ..... You need to be accurate with your turning ... !! unfortunate title for a review that shows it really really is Not, any kind of killer... Still love all you guys at Speedcubeshop .... just Not the EDU .... 🙂
@@SpeedCubeShopOfficial I understand it's your opinion 🙂...... But as i said ...you never mention Corner cutting, and use a completely new random category of "turning Flow" ..... two things you have never done in any previous 3 X 3 review .... so that seems to me ...My opinion 🙂.....that you are trying ....all be it in an incredibly subtle manner ...... to show the EDU in a brighter light than it really deserves .... "EDU a bit sloppy sometimes".... probably due to the "Precise" nature needed to turn it accurately ..... On the Economic side ... I'm sure it's a marginal profit (RS3M over the EDU) but a profit none the less ..... As always really love your store, your guys, and your very professional business acumen ...I know it appears i have an axe to grind over the EDU .....But, I am baffled by all the incredibly high praise it gets from people ( you tube reviewers and other sellers of cubing products) who seemingly know a great deal more than I about all aspects of cubing......but being the consumer, I feel i have to call out what ..To Me ..... seems unwarranted praise for an almost throw back feeling cube ....NOT up to even the lowest of GAN's quality control.....
@@SpeedCubeShopOfficial Oh! Hi Cameron!😁 ya i preferred the Rs3m cause its Cheaper, has Flagship Performance, and have a tensioning system for $9! it's currently my main😅 but i'm happy to see GAN/Monster Go made a budget cube cause GAN is known as Apple of Cubing! and having this Cube in the market for $11 is pretty good! Nice Video Cameron!👌 but i don't think the EDU is an Rs3m Killer more like a Rs3m Contender and i agree with u Cameron!💙 Now we have more Choices when picking a Budget Cube! (I know i commented "Rs3m is Better no need to explain" but i haven't try the EDU yet🤣 i just commented that cause the Rs3m it's my main and that's it🤣 and I just said "No need to explain." but i just explained it all lol🤣)
Hope those headaches go away Cameron! The video is good quality as always
4:24 I never want to hear a cube described as "wet" ever again 😂
The RS3M 2020 is a good cube with great performance. I like dry cubes. Corner cutting is good. And the turns are fast.
The Monster Go EDU is like a Meilong 3M.
"The EDU was so fast that I had to focus much more on accuracy to the point that some solves I'd overturn and have a sloppy rest of my solve, where as the RS3M is just able to turn through whatever without any problems even when I feel like it shouldn't have... but since I spent more money on the EDU I'm gonna give that the point for turning flow."
You can always slow down a fast cube, which isn't always the case for a slow cube.
@@DesmondKarani ...that wasn't quite the issue with the statement.
Brother Speedcubeshop is a multi million dollar business, they are not going to care about 3 measly dollars for a cube.
But a million dollar company such as SCS wont care about the extra 3 dollars
@HannaAndHanzCombined switch around the two numbers in the sentence, and you got there.
0:19 lol two big ass lockups during the cinematic intro
I just purchased the EDU - my first cube since owning the original Rubiks Cube decades ago when i was a kid. I never even came close to solving that one - LOL. Now with the help of the internet, i hope to finally solve my first cube!
Why didn't you show a corner cutting comparison? Also I wanted to see an edge piece interior comparison.
Great video though it would be better if the monster go was compared to rs3m 2021 since they are much closer in price
Cam… can we plz get more scs podcast episodes! They were super epic…
I've retired my RS3's in favor of the EDU. But then, I'm addicted to fast cubes. The only cubes faster are gonna cost a pretty penny with the GAN 11, 12, or 13.
Nice choice!
Just got my Monster go Edu and it turns amazing! Although rs3m is better and smoother but i still like the monster go because of the 56mm size
But the rs3m is also 56mm…
I believe Monster Go EDU killed Gan 11 Air (if we consider that "alive").
Having magnets is much more preferred over customization. Even RS3M people have to add magnets.
I used to have the 11 air
Centers breaking on my gan 11 m pro, so I get a Gan 11 Air to harvest parts from lmao
This is why I now have a cube addiction. So many new cubes to try. I'll be picking one up soon.
I just recently got my MonsterGo EDU. I got it about 7 dollars or 400 PHP, at first it's really fast but you'll get used to it. Effortless turns :D
Great review. Definitely something I can look forward to get someday
3:50 wait what!?!?!?! Over here in the philippines it has accesories its only how to solve the cube and cfop tutorial
I recently bought an Monster GO EDU
Thank you for the video 😊
Hey Cameron is the maru magnetic core kit coming to your shop? There are kits for the tornado v2, tengyun v1, yulong v2, wrm 2021, and the rs3m. I see it on a different shop but I would like to buy it from scs instead since shipping is fast.
Hy cameron , which should I get?
Moyu rs3m 2020 or 2021
@AFlightlessBird TØP i do prefer 2020. But i just hate the spring noise problem of 2020.
Which is the best Speedcube in the budget mid-range ?
I am going to get a new speedcube very soon.
Pls share your suggestions.
@AFlightlessBird TØP i want a smooth cube which do not pops.
@AFlightlessBird TØP faster and flexible.
Nice review but missing two important categories:
1. Spring noise
2. Center caps poping
Also corner cutting and an edge piece interior comparison.
Thanks Cameron for this review.
How does it compare to the WuWei? It looks like it could be a similar feeling cube
I always go back to moyu cubes. I tried the gan 356m and the dayan tengyun v2 but i still prefer the wrm. Well that's untill i got the rs3m, which is more stable for the same corner cutting
Hey cucumber , you should change the t-shirt from staff to boss 😎
I dont understand whats the difference betwen Gan MG3 and MG3 EDU
edu is faster and smoother along with better corner cutting than the mg3 but mg3 uses gan spring system whereas edu uses screw
the rs3m is better. literally every category rs3m won except in the "general feel" and "turning flow". What does that even mean?!? i feel like speedcubeshop is just trying to sell another cube. And i still dont understand how the weight of the cube is supposed to change the stability. Ive used both and the monster go is way too fast which makes the magnets feel weaker.
A signature rs3m 2022 like the yoo cube echo will be better than the gan, but with that the price will be higher
Swift block or rs3m?
Hey…is there a possibility of the Zettaminx coming to your store I’ve been saving up but I’ve only found it on a competitors store but I’d prefer to buy it from you guys
Sweet! Glad I waited!
people buy those???
@@vinesthemonkey Yea the minx series is my favorite to solve and if I can find bigger ones I'd love to get them.
More expensive for reason
But still bought rs3m
I love you polo shirt where can I get that😭❤️
the Monster Go EDU kinda reminds me of the Meilong, just from the exterior though not sure how the cube actually feels when turning
Feels like shit
You guys are the best speed cube shop out here
I was gonna watch this the first time it got posted but got deleted ;-;
Now I can watch video in peace
can you help me whats better EDU or swiftblock 355s?
Edu cost $12 and the swift block cost $13, they are targeted for beginners. Swift block is more blocky than the edu. Swift block has a tensioning system but not the edu, edu only has a screw only. Swift block has visible magnet but no magnet settings. They are both magnetic. I think the swift block is strong magnet than the edu because they are visible.
@@jonathansalvador981 thank you! i will buy the swift block
The EDU isnt really that bad. The magnets are amazing, its just that the cube is too fast lol but youll get used to it the more you use it though. Or, you can adjust the cube too.
i got it a year ago and it is my main since then
I have both and many many more cubes so I can give my opinion on them. They are VERY different cubes. They are on like opposites. The EDU is the second fastest cube Ive used ever. Its faster than all but one of my maglev puzzles. The speed is comparable to the MoYu RS3 M Super V2 Maglev (my fastest cube). Because of this, it is a very unique cube. It feels like a maglev cube. On the other hand the MoYu RS3 M 2020 was very dry and sandy out of the box. It felt like it had a lot of friction and quite honestly was one of the worst feeling cubes out of the box for me. I immediately had to lube it (used lunar) and loosen it a bit (it was on tightest setting out of the box), which to me, is a bad thing since a bottle of lube is only a little cheaper than the cube itself, and begginer cubers probably dont want to lube and adjust a cube. After lubing it felt very average. I think moyu messed up by not including factory lube. Without lube, the sandy dry frictiony feeling will probably go away. The momster go EDU has stronger magnets while the MoYu RS3 M 2020 has rather weak magnets. One major thing for the monster go not discussed in the vid is the texture. I found the plastic on the monster go to be very slippery. Its probably the the cube with the least grip I own. The MoYu RS3 M is pretty standard with grip. The RS3 is probably better for cubers who are extremely new and dont know finger tricks since it will give more controll. The monster go might be better for someone whe can do basic tricks and already has some muscle memory.
Wait I thought you already posted this video is that just me edit: I did not hear the first part lol
My skill:
Like accurate turning style
No customization
Like smooth feeling
Already set-up
How about Rs3m 2021?
Ohh I might have to pick one up soon!
You reposted it, why?
Give us a qiyi m pro review.
Reupload?
Cameron ... see a doctor dude ....random headaches could be absolutely anything ...!! (Military Paramedic Retired)
Great review tho, def something that ill keep in mind
Are you all the way moved in
Hy i feel a bit unsatisfied that scs has less price if rs3m and other puzzles than CUBELELO an Indian cube store.
What can I say? A puzzle in your own country is more costly than a foreign country.
Hope cubelelo realise this and lower the price of the puzzles.
@@Harrysun7 main problem is the shipping cost from getting it from the brand factory
the rs3m 2020 is incredible, after 2 years, he still one of the best budget cube (if not the best)
@@SpeedCubeShopOfficial thanks for the reply!!!
It's only been 2 years not 3 years🤦🤣
@@swaruplangthasa6888 sorry, i will edit
@@Airton2 Tnk u
The edu is like the meliong
Like the Meilong 3m ? No it's not, it's a completely different cube.
Imagine if Gan gives ges system for monster go
Wait so is a GAN a MoYu or is a MoYu a GAN. I’m confused lol.
Edit: ohhh a fan is a MoYu rs3m killer lol
Edit 2: Ok I’m confused again lol. So the rs3m is a gam killer?? I’m very confused. If I made anyone else confused I’m sorry lol I am a no brain.
What?
@@rax1899 lol sorry if I confused you but here’s what I mean. I thought gan had released a new cube called the rs3m killer and they partnered up with MoYu to make it. But I just found out that what they are trying to say is that the gan KILLS the rs3m. Lol
Scs i swear to god i saw this thumbnail a long time ago
i clicked on the vid and it didnt load
you forgot to mention that the rs3m is a 2 year old cube
Bruh I can't even afford any cubes and I don't even have a working 3x3
The only Rs3m 2020 killer is the Rs3m 2022
I have the new monster edu like u
Rs3m is the real flagship 😅
idk is it?
monster go EDU team yeahhh
Notice how SCS does the review differently than the cubicle. For the cubicle they just judge based on first impression while Cameron actually dives into more stuff about the cubes. That is why I love SCS way more than the cubicle.
he is always on the side of gan cubes....even when moyu is better
the thumbnail is the 2 cubes i got today
(im blind i tought it was cubehead)
Enjoy them! Hopefully you got them from SpeedCubeShop!
the gan is more of a bigener cube and the mo yu is more of a cheap advanced cuber cube
Very good video
doesnt it happen to you, that you buy a new phone, and emidietly in youtube theres videos about why youre phone sucks? WELL I JUST BOUGHT A FUCKING RS3M
nah the rs3m is fantastic, you made a good choice
It's the other way around actually. I own both and I can tell you that the reviewer is going very soft on the EDU. The rs3m is miles better.
@@SpeedCubeShopOfficial The corner cutting on the EDU is bad. It requires way too much force at normal angles and since most people aren't Clark Kent, it locks up a lot. Combine this with the insane speed of this cube and it's an even bigger problem. Why so fast by the way, what exactly is the benefit of being able to do a 360 by blowing on the top layer ? Totally useless. So why do I think you went soft on the EDU ? Because you didn't explicitly mention the corner cutting and because you considered the requirement for a "careful turning style" something good when it actually isn't. Being unforgiving is never good for a cube.
With that said, I agree that these opinions are subjective. The EDU gets some criticism for being too rigid though, it's not just me...
i like edu
i think moyu rs3m 2020 is much better than edu
In phillipines in the box of the edu
The cube, the CFOP tutorial and the card
In the Amerika in the box of the edu
The cube and the card
Strange right?
Noob RS3M But Still 804 Views and 61.2K Subscribers how that's possible
I am faster with rs3m at the moment.
I have the first edition of the monster go. And I kinda liked it with the ges system better.
Always even tensions.
On the other hand: screws are more difficult to take apart. So maybe a better choice for beginners. I don't know.
It's a bit of a dilemma.
Feel better soon!! 🙌🙌❤️
BROOOOOOOOOOOOOOOOOOOO NOOOOOOOOOOOOOOOOOO
RS 3M IS THE GOD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Wow
theres 777 views lol
I'm Here Early ;)
The RS3M is still the cube to beat, "turning Flow" ..making up new categories to make your unbiased opinion seem even More unbiased ..? Bad .CubeShop...... GAN is by far the maker of the best fastest most customizable cubes on the market ...That is True .... but ... It seems that your assessment of the EDU is wayyyyyyy more biased than you probably think it is .... I know. Because I have an original Monster Go, which is by no means an RS3M killer, But neither is this New Version .... that looks remarkably like my one ... although the internals my have changed slightly ... your assessment of needing to be more precise in your turning ... as a positive !!??? Is a flawed one .... Corner cutting ...every reviewers 'go to' feature (pardon the pun) is Never mentioned here ..... a must have !! ...according to Every reviewer i've seen ...... the RS3M is pretty good at corner cutting for a $9 cube .... how is the GO ?? if its anything like the earlier version ...and it appears so in your video .... Then No ... corner cutting is absent, because, in your own words ..... You need to be accurate with your turning ... !! unfortunate title for a review that shows it really really is Not, any kind of killer... Still love all you guys at Speedcubeshop .... just Not the EDU .... 🙂
@@SpeedCubeShopOfficial I understand it's your opinion 🙂...... But as i said ...you never mention Corner cutting, and use a completely new random category of "turning Flow" ..... two things you have never done in any previous 3 X 3 review .... so that seems to me ...My opinion 🙂.....that you are trying ....all be it in an incredibly subtle manner ...... to show the EDU in a brighter light than it really deserves .... "EDU a bit sloppy sometimes".... probably due to the "Precise" nature needed to turn it accurately ..... On the Economic side ... I'm sure it's a marginal profit (RS3M over the EDU) but a profit none the less ..... As always really love your store, your guys, and your very professional business acumen ...I know it appears i have an axe to grind over the EDU .....But, I am baffled by all the incredibly high praise it gets from people ( you tube reviewers and other sellers of cubing products) who seemingly know a great deal more than I about all aspects of cubing......but being the consumer, I feel i have to call out what ..To Me ..... seems unwarranted praise for an almost throw back feeling cube ....NOT up to even the lowest of GAN's quality control.....
!
:)
Rs3m is better no need to explain.😐
@@SpeedCubeShopOfficial Oh! Hi Cameron!😁 ya i preferred the Rs3m cause its Cheaper, has Flagship Performance, and have a tensioning system for $9! it's currently my main😅 but i'm happy to see GAN/Monster Go made a budget cube cause GAN is known as Apple of Cubing! and having this Cube in the market for $11 is pretty good! Nice Video Cameron!👌 but i don't think the EDU is an Rs3m Killer more like a Rs3m Contender and i agree with u Cameron!💙 Now we have more Choices when picking a Budget Cube! (I know i commented "Rs3m is Better no need to explain" but i haven't try the EDU yet🤣 i just commented that cause the Rs3m it's my main and that's it🤣 and I just said "No need to explain." but i just explained it all lol🤣)