Dude. You are a lifesaver. My wife’s Audi had the same issue.. I’d been putting it off for about 3 months now. After I watched your vid about 5 times, I took the plunge. Worked BEAUTIFULLY.. thank you
Very helpful video, took me a while to find the broken wire. The wire had become very brittle and had completely snapped I'm guessing this is quite a common problem with the wires aging and constantly moving with screen.
I followed this video a few years back, It worked perfectly. This week it happened again with another part of the wire. I tried this video again and it worked again, except, this time when I turned my car back on the ac didn’t work. The ac center vent got plugged back in like normal and now my ac is blowing really hot. Did anyone else experience this?
I know this an old question but as nobody answered it I thought I'd chip in! The MMI screen cannot be coded by VCDS (or any OBD2 diagnostic tool) to stay out permanently. The only way you can do this is by removing the screen housing with the screen out (ignition on) and removing the small black connector in the back that powers the little motor which operates the screen movements. Simply put it back together and the screen will always stay out. There is a very good vid detailing the process here: th-cam.com/video/0CPT72FqNEo/w-d-xo.html Credits for the above video naturally go to its' uploader/creator.
My issue is that screen works as it comes out, horizontal position, and then once it start pivoting (going vertical) screen goes black!? Is this the same problem?
Good idea to check the 5amp fuse before pulling it apart.
Easier than splicing in new wire! I’ll try this first!
thanks for the video, this fixed my screen. I had two breaks in the brown wire and one in the pink and blue, fuse was blown as well
Dude. You are a lifesaver. My wife’s Audi had the same issue.. I’d been putting it off for about 3 months now. After I watched your vid about 5 times, I took the plunge. Worked BEAUTIFULLY.. thank you
Thanks friend. That was the exact issue. The wires around that crack were hard as a rock.
Thanks for this video. Had precisely this problem and your video nailed it perfectly!
Thanks for the video, saved me a bunch of time chasing other thoughts of the problem
Very helpful video, took me a while to find the broken wire. The wire had become very brittle and had completely snapped I'm guessing this is quite a common problem with the wires aging and constantly moving with screen.
Thanks, it's worked. Now need to fix the problem.
Thank you
Welcome back. Missed your content
Thank you for watching !
Thx I have to check it tomorrow as it also stopped working😊
I followed this video a few years back, It worked perfectly. This week it happened again with another part of the wire. I tried this video again and it worked again, except, this time when I turned my car back on the ac didn’t work. The ac center vent got plugged back in like normal and now my ac is blowing really hot. Did anyone else experience this?
What size socket do you need
8 mil
Thank you for this video. Great job.
thanks you helped me solve the problem
thank you worked for me
Yoo my A6 mmi wont come out and i don’t find problem. Radio aint working and cannot find on internet what is problem
How can i make setup that display does not fold in?I want that display always stay out.I have vcds but i need instructions to code it.
I know this an old question but as nobody answered it I thought I'd chip in!
The MMI screen cannot be coded by VCDS (or any OBD2 diagnostic tool) to stay out permanently. The only way you can do this is by removing the screen housing with the screen out (ignition on) and removing the small black connector in the back that powers the little motor which operates the screen movements. Simply put it back together and the screen will always stay out. There is a very good vid detailing the process here:
th-cam.com/video/0CPT72FqNEo/w-d-xo.html
Credits for the above video naturally go to its' uploader/creator.
Спасибо !) твое видео помогло !))
Good job
Instead of taking everything apart, you should have checked and replaced the fuse first😅
You din’t watch the video, because of the shorted ground and positive wires the fuse was blown. After you fix the wires you change also the fuse.
Where’s the fuse box?
@@islamarafa7455 passanger side, on the dash side
My issue is that screen works as it comes out, horizontal position, and then once it start pivoting (going vertical) screen goes black!?
Is this the same problem?
Yes
Thanks to you, I have learned what not to do 😅
Can u show where fuse brother
Fuse A2 , 5amp , passenger side it’s in the video 4:26
@@amperugarage tnx lot bro I done my car coz of ur vidio
Fiz tudo isso mas o meu nao aperece nada
What’s that tool called
What tool ?
I miss your old videos with music 😢
I miss them too..i don’t have time anymore to create audio.. maybe in the future
@@amperugarage I hope too.
good luck !