Valance panel install 68-74 GTO A-body
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- in this video I install a valance panel on the 68 GTO. I show you how some of the brackets then bolts come together to support the valance panel. I show you how everything comes together on the 68 and 69 GTO. The core support is different than the other GTOs. please let me know if you have any questions and leave a comment, please like,share and subscribe.
![[TH] 2024 PMSL SEA Finals D3 | Fall | รู้ผลทีมแชมป์ พร้อมตั๋วสู่ PMGC](http://i.ytimg.com/vi/7NxsN0Ch6vk/mqdefault.jpg)
Thanks, Classic Rewind ❤️ for sharing !! This is invaluable help on my '68 LeMans
I hope you enjoyed the video. Thanks for watching. All the best
@@classicrewind2715 and yes, I enjoyed the video very much. Thank you for your time and hard work !!
Oh yes , now I understand what you are talking about
I hope I can help you in the future. Let me know, sometimes my explanation isn't clear. my apologies..
i bought OER fenders and fender extensions and a OER valance panel for my 1968 firebird the turn signal housing and lens would not fit! a 1/4 inch to small was not going to spend a month refabricating a new part bought the same parts from AMD and they fit perfect it still is a ratchet strap job but its done. i cant even sell the OER panels to anyone because they wont work lesson learned AMD only like all of the rest of my replacement panels good video Sr.
Hi, I had some bad panels as well. My doors for the GTO were horrible. I cut up the new doors and patched my old doors. The cowl panel I bought from eBay years ago was horrible to. I should have stuck with Original Parts Group. When I bought it from eBay. All the holes were too big. it didn't fit my plastic vent covers for the wiper blade area. Thank you for watching. All the best.
Looking good, I love when a project starts looking like a car again .
Thanks. When I'm done fitting everything together, I have to take it all apart again to do the body work. It takes so much time, I was not expecting it to be this big of a project. covid-19 really took me back. I was not able to get parts. I have been waiting a year for my motor
the fine threaded bolt goes at the top of the center bracket and threads into the core support . goes in pointing to the firewall. There should be a welded nut inside the core support.
Hope this helps
Thank you for the information. For some reason I think that was of course threaded Bolt . There was one of those u-bolt clips that the bolt went to. I will check again, thank you so much. All the best
Appreciate the video’s, very nice job! Would you happen to have a video on the core support replacement? I’m trying to figure out the core support bushing install. I’m thinking my male/female bushing are swapped. Thanks
Thanks. I'm glad you're enjoying the videos. I am using polyurethane bushings for my core supports. I had to lift them up a 1/4" I couldn't get my front end to line up properly. I don't recall what video that was. I think it was lining up my fenders. if I find the video, I will send it to you.
th-cam.com/video/lXwHhfpjrZw/w-d-xo.html
I like what you’re doing on that GTO but according to the Manuel and according to AMK fasteners it’s a course threaded bolt that goes into a cage nut
There are two types of bolts. I'm probably not explaining it correctly. There's five bolts that go to the inner Fender to the fender that screw into plastic clips. Then there are the bolts that hold the fender to the valance panel to the inner fender. Those are different. They're all coarse threads. But one is more coarse. The coarser of the two, if that's even a word. lol. Goes to the inner fender to fender with the plastic clips.
If you have not thrown out valance I would like to buy it from you. I am having difficulty in obtaining one for my 70 Lemans. I would like to see how I could modify it to work before buying a new one. Very good work you have done to that car.
Where do you live? I don't think the 70 LeMans Valance panel is the same as the 70 GTO. There's one on eBay for a GTO. I would do some research to see if they're the same. You will spend more time modifying the 68 valance panel because of the lights on the side they're not on the face. Let me know all the best.
I live in the same town you bought your GTO from in NJ. Your car was for sale in 2016 as a roller with a 389 on Craigslist. Unfortunately the 70 Gto valance won’t work because the fenders around the bumper area are recessed on the Lemans
Hi. I'm working in Old Bridge tomorrow. Right off of Route 9. if you like I could swing by and take a look at your car after work.
I think you have to use the other nuts when it comes to the front valence
Thanks for commenting. There's two different types of nuts. One has a coarse thread, one has a fine thread. The fine thread goes into a cage nut . The coarse thread goes into a plastic clip. All the best.
Yes I have them I’m asking about how to place them the video seems a little dark , maybe I’ll put it on the wide screen
They fit a certain way or else it'll bind the fender. You want to make sure it's placed where there's less stress when you bolt it together. I think they both have the same angle on them so it's just making sure it fits properly. Sorry I didn't see this message till late.
@@classicrewind2715 ok thanks
Hello again , I am having a problem figuring out what’s up or down or how to connect the bracket that holds the inner fender to the radiator core support, anyway you can clarify that ,, diagrams ?
What year GTO do you have? The only brackets. There about 2" long and bent slightly. They only go on a 68 and 69 lower radiator core to Outer fender. Are those the brackets that you're talking about?
@@classicrewind2715 I’m sorry yes 68
Yes. there is a little piece of metal about 2 inches by inch and a half with two holes in it very simple. (Original Parts Group.)
- Fender brackets 1968-69 GTO front lower-
Search that term it'll pop up
What brand valance panel
I bought mine on eBay. You could get it from a bunch of different suppliers NPD, OPGI, Ames. They're all pretty much the same quality
Thanks man
Looking great!! Do you plan to assemble the car then paint? I'm having my jambs all painted first, then assembling doors, fenders, etc. Then shoot the exterior. Thanks
Hi Wayne. I hope you're doing well, thank you for the kind words. I'm going to make sure I get everything fitting properly then doing my body work. Then taking it apart again to paint firewall, jams, xcetera. Painting everything and then assembling it. All the best
That's basically what I'm doing. Keep them videos coming!!! @@classicrewind2715
@@waynebauer2770 Thanks..