The Stator Wrecker is a machine. Between Steve on the air chisel and you on the jaws, you need to find more motors. Small transformers are good, but you make more per hour on the motors. Great job!
Holly shit, That was one a different way to heat up your workshop. Pyro mania at a new level. Man you and Steve are different, most of the time we don’t know what to expect in your videos. This video should get your viewers talking. Good on you fellas.
It’s amazing how different people are. You freak out when temps get down to 70 and I deal out when they get up to 70. I’m a cold weather kinda guy but live in northwest Georgia. If I can talk my wife into it we’re going to Alaska lol
We used to have a thing that heated em up without fire and the glue would get soft and we could pull it. We had a press to deal with smaller stators and we used pressure to break all that shit loose but we wasn’t saving anything from em either
That big ass blue rotor has a key way that held on the small one you cut off with the torch. The large section is also held on with a key way. Remove the key will help get it off the shaft you want to keep.
It's amazing how powerful hydraulics are. The copper drum is filling up nicely. Really enjoy watching the wrecker in action. The fans look like they're doing their job to pull out all the smoke and fumes. Do you have another fan by the garage door pulling in fresh air? Looking forward to Part 5. Nice job fellas.
I think that a faster/bigger pump on the hydrologics would be nice to get a little faster turnaround time on getting the copper out of the rotors and stators. Keep up the awesome work 👍🤙🏾 From Hawaii
What part of Florida do you stay at I stay in Duval county I know you guys are south of me I just don't know what part and I know you say you go to Miami a lot to
Why couldn't you use your impact hammer to put a sharpened punch through the copper, thin loop a chain around it or make a double-hook to hook on each side of it.
What monster did this come out of? Or did you just pick it up already out of its home😂 My new honey hole is a mobile MRI repair shop. You should check into it! They have massive generators ! Transformers copper galore! Being your in south Florida I bet they are everywhere!
Good job overall.Me personally,I would have stood the unit up vertically,soak the shit out of with PB Blaster and let it sit overnight.The stuff is awesome for this kind of application and would have broke down the rust and provided lubrication.
I don't think I would be posting the insulation burning on TH-cam with big brother and the EPA watching, just saying. Great job getting the wire out of the motors.
Getting into the holiday spirit I see! Stators roasting on an open fire, steel slag nipping at your toes. NICE!!
😂😂😂 Thanks
Cant wait for part 4
Thanks
Pulling Copper , PayDay a Comin , Hell Yeah . Cool Video men .
Thanks
Fantastic video. I like your enthusiasm. That hydrological tool you built to pull copper windings is genius
Thank you very much!
hello project shop fl it's is randy and i like yours video is cool thanks project thanks friends randy
Thanks Randy
I just love you pulling out the copper with that machine. Cant get enough of it.Keep it up . Ken
Thanks Ken! 👊👍
You got this system down pat. Now you just need a copper wire bailer.
I've been looking for one.
The Stator Wrecker is a machine. Between Steve on the air chisel and you on the jaws, you need to find more motors. Small transformers are good, but you make more per hour on the motors. Great job!
Thanks for the suggestion
that was a great video on puling all that copper and the mill is looking great too thank you for shareing and keep the faith
Thanks 👊
love it
Thank you!
great job and video
Thanks
I GOTS TOO HAVE MEONE OF THESE!!!!!!!!!!!!!
😂😂👍👍
Great video my friend
Thank you 👍
I got a little tingle! 😂😂😂
😂😂😂
Where's the marshmallows? Remember when Donny lit the bonfire at my party?!! Whoosh!!
Yes! That was awesome. lol
Holly shit, That was one a different way to heat up your workshop. Pyro mania at a new level. Man you and Steve are different, most of the time we don’t know what to expect in your videos. This video should get your viewers talking. Good on you fellas.
😂😂😂 Thanks
It’s amazing how different people are. You freak out when temps get down to 70 and I deal out when they get up to 70. I’m a cold weather kinda guy but live in northwest Georgia. If I can talk my wife into it we’re going to Alaska lol
We used to have a thing that heated em up without fire and the glue would get soft and we could pull it. We had a press to deal with smaller stators and we used pressure to break all that shit loose but we wasn’t saving anything from em either
😂😂😂 Funny thing I'm from New Jersey. lol
My other son used to live up in Rome Ga.
Great video Buddy, jeep doing it. Progress Progress Progress
Thanks
Love the copper scrapping 👍
Thanks
Hey Derek, Great video! Please be careful when you're burning - all those chemicals are nasty!! Thumbs up! Jim
Thanks for the concern
That mill looks amazing!!! I can't wait to see the awesome shit you are going to make with it!!! 👍👊
Thanks! Got some good stuff in the works
cant wait to see you building the hammer mill
Me too! lol
nice copper
Thanks
That's a big M.F. Nicely done sir.
Thanks
Have you ever tried to use a log splitter to Crack the casings then pull the copper
No, but thanks for the suggestion
Love the channel my man
Thanks
You'll be scrapping them fans next after you cook em up like that
😂😂😂
Hey brother, maybe you could make the jaws on your puller adjustable like a big set if channe locks.Great videos, man.
Thanks I've thought about that.
That big ass blue rotor has a key way that held on the small one you cut off with the torch. The large section is also held on with a key way. Remove the key will help get it off the shaft you want to keep.
I don't think you could remove the key without cutting or pressing the plates off.
Thank you for posting late at night, it makes the perfect content for us dumbass insomniacs to watch
😂😂 No problem
💪💪💪👍👍👍
👊👊👍👍
It's amazing how powerful hydraulics are. The copper drum is filling up nicely. Really enjoy watching the wrecker in action. The fans look like they're doing their job to pull out all the smoke and fumes. Do you have another fan by the garage door pulling in fresh air? Looking forward to Part 5. Nice job fellas.
The fans pulling the air out the back door are pulling fresh air in the front door.
I think that a faster/bigger pump on the hydrologics would be nice to get a little faster turnaround time on getting the copper out of the rotors and stators. Keep up the awesome work 👍🤙🏾 From Hawaii
Thanks
Gittin it
👍👊
You need a overheard crane, if Andrew Camarata can build 1 so can you😂
I plan on having one soon
Woodruff key comes out before you knock the small motor
I don't think it would come out that easy.
I know you probably already thought about this but it looks like if you just had multiple grabbas it would be easy
I don't think it would pull more than one.
Limit switches are inexpensive and wise to install on the table .
Thanks for the suggestion
keyway holding it
Thanks for the info
What part of Florida do you stay at I stay in Duval county I know you guys are south of me I just don't know what part and I know you say you go to Miami a lot to
West Palm Beach
Copper Scrablegs
😂😂😂
You need to make like a tater rake cat claw. Pooler for small
Thanks for the suggestion
I live in Alberta we get down to -40 degrees in the winter with the wind chill . Way to cold for me
Wow! Thats why I love south FL. lol
Why couldn't you use your impact hammer to put a sharpened punch through the copper, thin loop a chain around it or make a double-hook to hook on each side of it.
That might work
You need to turn that stator around and then pull the shaft out just using the chain.
Thanks for the suggestion
That green glue is crazy. I had 2 big motors with it and they are the worst to try and get out.
Yea we cooked some of them in a fire.
@ProjectShopFl wish I could do that here in Cali. They won't take burnt copper
Gas cutter + air chisel works great. Bigger puller + WD40 could be faster and better.
Thanks for the suggestion
What monster did this come out of? Or did you just pick it up already out of its home😂
My new honey hole is a mobile MRI repair shop. You should check into it! They have massive generators ! Transformers copper galore! Being your in south Florida I bet they are everywhere!
I picked up 9 transformers all copper 617 pounds of it I tore out!
Giant generator, Nice I will look in to that we probably have a lot down here.
Maybe pulling would be easier if you just cut pulls day into 4-6 sections.
Maybe lol
If you go through Simple Man’s videos he has a set of pullers he used to extract copper similar to your setup.
Thanks for the suggestion
@@ProjectShopFl also loved the video 😍
@@jennypennyridesagain5599 I'm glad you enjoyed it.
It's pretty sad when you get more money from the steel than you do from the copper.
I got way more for the copper than the steel.
Try a hook of some kind
Thanks for the suggestion
Good job overall.Me personally,I would have stood the unit up vertically,soak the shit out of with PB Blaster and let it sit overnight.The stuff is awesome for this kind of application and would have broke down the rust and provided lubrication.
Thanks for the suggestion
No subtitles 😭😭😭
I did not know I ever had them. lol
burning will a lose of .30 to .33333 depends on how hot it gets
Yea I don't like burning them.
I don't think I would be posting the insulation burning on TH-cam with big brother and the EPA watching, just saying. Great job getting the wire out of the motors.
Thanks for the suggestion
Wie könnt ihr ein offenes Feuer in der Werkstatt machen? No,No
Warum nicht? Es war im Stator enthalten. lol
Melting concrete = clown lol
Thanks for the clarification
The ads on your videos are a joke not even 5 mins in and and 2 watch 3 20 sec ads 😂
Where do you think the money comes from youtube pays Derek?
He not responsible for the timing or length of the advert
I haven’t had a single ad come up.
Get TH-cam premium or whatever it's called. I've never seen a advertisement.
He doesn’t control the ads TH-cam does
What a joke
Really how is it a joke?