ahhhh drilling joists, used to first fix timber frame new builds in the 90's, have spent many a cold day drilling hundreds of holes in joists, we would drill through the outside timber frame skin and poke copper through, it was all copper back then. looks like a good job, good luck wiv it.
@@plumbingFC so what we did feeding it through wall is nothing new then by looks of it 😂 I bet it was a lot harder all in copper…also did you find you was pulling wood chipping out your hair for bloody days after 😂👍
I let the smoke out of my core drill, plumber I was working with had the Milwaukee hole hawg, we used that to drill a couple core holes and they drilled quicker than the core drill would. Monster drill, dunno if i could justify the expense but it’s a proper drill bruv
@ I’m a chippy by trade, don’t have much call for it. Ripped a 110mm core through that 9” wall tho! Could buy a 36v mitre saw for same sort of price, that’d make its money a lot quicker
Fascinating video, especially feeding copper through joists, I don’t know how you remember what each pipe does is have to put labels and red tape on to remember
22mm pipe is radiator feed and return. Most radiators are bi-directional valves. The 2 smaller ones are hot and cold water Gas supply is always 22mm too and identified easily 👌
@@michaelbolt4530 it can get confusing, the hot is easy as that’s the copper pipe, it can get confusing but honestly when your on the site and working with the pipes you start to learn which is which. By pass is for boiler so when the zone valves shut down and the pump overruns, it can return to the boiler on a loop
Thanks for the insight into first fixing Luke, but I still don’t understand how you keep track of what pipe is what, do you have to know which pipe is which at every radiator? I’m looking forward to the underfloor heating going in. 👍
@@alshore6168 it can hurt your head but we have tape on hot and cold pipes and when your working on it all day you start learning the routes and what’s what..suppose it helps I’ve filmed it as well
So it's ok to drill holes through studs to run pipework,i was thinking of doing this in my bathroom. but was advised against by a plumber, saying it weakens the framework.
How ya doin luke, up against it as usual i see. Im not on the tools now as im a site manager for a principal contractor but i still have most essential tools required, sometimes its just about having the extra hands.Listen, i dont wanna piss other plumbers off (which i used to be) but im offering my services for nothing mate....maybe a pint after? Im on annual leave starting the 16th December untill the new year and id like to help if possible...just point and click and ill do it i promise you. This is just a genuine offer to help someone out as much as possible. Im a local to walsall so let me know if i can be any help bud. Love the channel and keep up the great work.
@@joebrown5967 amazing offer mate really appreciated, I’ve managed to get the lads together on this one for more than what they normally charge for day rate, there will be 3 of us for 2 days to fit all the underfloor which should be doable if it’s all ready to go 👌👍👍
I know the grumpiest plumber in the world who’ll come do that underfloor run for about £300 a day. He got 49 years at it so knows his shizz, just zero social skills
@ yess as h until he speaks to ur customer! Honestly, they plan days out if he’s round! In all serious tho, he’s a good guy. I’m not a plumber so I get him to 1st fix my bathrooms so I can get them fitted nice
14:09 yeah it’s a body warmer, since when did people start calling them gillets? It’s like flip flops and sandals become sliders? Wtf mate, people’s be calling the bog the ‘John’ next 😂
@@bluebulldog_uk yeah u say body warmer now and people don’t know what ur on about! If you orders a body warmer you’d get something different to a ‘gillet’
Thanks for sharing this Luke good luck with it!!
@@barryl.2688 thanks Barry 👌👍👍
ahhhh drilling joists, used to first fix timber frame new builds in the 90's, have spent many a cold day drilling hundreds of holes in joists, we would drill through the outside timber frame skin and poke copper through, it was all copper back then. looks like a good job, good luck wiv it.
@@plumbingFC so what we did feeding it through wall is nothing new then by looks of it 😂 I bet it was a lot harder all in copper…also did you find you was pulling wood chipping out your hair for bloody days after 😂👍
I let the smoke out of my core drill, plumber I was working with had the Milwaukee hole hawg, we used that to drill a couple core holes and they drilled quicker than the core drill would. Monster drill, dunno if i could justify the expense but it’s a proper drill bruv
@@benchippy8039 yeah I’ve heard the Milwaukee one is a monster as well but again it’s justifying the cost
@ I’m a chippy by trade, don’t have much call for it. Ripped a 110mm core through that 9” wall tho! Could buy a 36v mitre saw for same sort of price, that’d make its money a lot quicker
Fascinating video, especially feeding copper through joists, I don’t know how you remember what each pipe does is have to put labels and red tape on to remember
22mm pipe is radiator feed and return. Most radiators are bi-directional valves.
The 2 smaller ones are hot and cold water
Gas supply is always 22mm too and identified easily 👌
@ he mentions a by pass pipe, what’s that for?
@michaelbolt4530 I'll have a look back. If I'm not mistaken it's the full loop for the boiler but a general bypass is for if there's a fault
@ ok
@@michaelbolt4530 it can get confusing, the hot is easy as that’s the copper pipe, it can get confusing but honestly when your on the site and working with the pipes you start to learn which is which.
By pass is for boiler so when the zone valves shut down and the pump overruns, it can return to the boiler on a loop
Thanks for the insight into first fixing Luke, but I still don’t understand how you keep track of what pipe is what, do you have to know which pipe is which at every radiator? I’m looking forward to the underfloor heating going in. 👍
@@alshore6168 it can hurt your head but we have tape on hot and cold pipes and when your working on it all day you start learning the routes and what’s what..suppose it helps I’ve filmed it as well
MLCP,for the win 🤘😎🤘
@@SuperWayneyb next one defo looking into it mate 👌👊👍
@ Been using it for decades great stuff in its place 👍👍
Luke did you know you can turn an angle grinder into a right angle drill by fitting a 1/2" chuck in place of a grinding disc.
@@anwah100 I didn’t know this, will have to have a look into it 👌👍
Screwfix has started selling wavin Mclp and the jaws now all next day I think. 👍
@@lmcremin didn’t know that. Good to know thou
So it's ok to drill holes through studs to run pipework,i was thinking of doing this in my bathroom. but was advised against by a plumber, saying it weakens the framework.
@@bazmawhirk1134 depends on size of joist, you can only put a certain size hole through a joist at set places
@@bazmawhirk1134 www.labc.co.uk/news/how-get-it-right-notches-holes-solid-timber-joists
@@bluebulldog_uk Hi. thanks very much for the reply,where would i get regs on this stuff
If they get that done in 3 weeks I would be amazed lol
3 weeks my arse 😂
@@TomChapman-wv9iq he’s pushing hard mate fair play to him, he’s got a deadline so hopefully he gets there for us to do the underfloor
How ya doin luke, up against it as usual i see. Im not on the tools now as im a site manager for a principal contractor but i still have most essential tools required, sometimes its just about having the extra hands.Listen, i dont wanna piss other plumbers off (which i used to be) but im offering my services for nothing mate....maybe a pint after? Im on annual leave starting the 16th December untill the new year and id like to help if possible...just point and click and ill do it i promise you. This is just a genuine offer to help someone out as much as possible. Im a local to walsall so let me know if i can be any help bud. Love the channel and keep up the great work.
@@joebrown5967 amazing offer mate really appreciated, I’ve managed to get the lads together on this one for more than what they normally charge for day rate, there will be 3 of us for 2 days to fit all the underfloor which should be doable if it’s all ready to go 👌👍👍
@bluebulldog_uk no worries mate, but if you need it the offers there and I'd be more than happy to help. Let me know if you need a hand.
I know the grumpiest plumber in the world who’ll come do that underfloor run for about £300 a day. He got 49 years at it so knows his shizz, just zero social skills
@@benchippy8039 rather have a grump who knows what he’s doing than a very social guy who knows nothing 😂😂👍
@ yess as h until he speaks to ur customer! Honestly, they plan days out if he’s round! In all serious tho, he’s a good guy. I’m not a plumber so I get him to 1st fix my bathrooms so I can get them fitted nice
14:09 yeah it’s a body warmer, since when did people start calling them gillets? It’s like flip flops and sandals become sliders? Wtf mate, people’s be calling the bog the ‘John’ next 😂
We'll be celebrating Thanksgiving Day soon.
@@bled83 I think you are trying to lead us up the garden sidewalk!
@@benchippy8039 honestly only reason I said is t is because Chris said he had a “gillet” 😂😂
@@bluebulldog_uk yeah u say body warmer now and people don’t know what ur on about! If you orders a body warmer you’d get something different to a ‘gillet’