Just ordered this board since most boards are sold out. Doing my first build in 20 years. Pairing with a 3600, 16gb DDR 3000 MHz memory, 1660 Ti GPU. Building a virtual pinball with a Vizio 4K 39” tv. Think I will be ok? Great video and thank you.
Nice review - I'm doing a build tonight with this board. I love the lazy susan with frame stand - that actually looked pretty pro. I'wish I had one of those fancy lighted magnifiers too. I'm getting to old to read these instructions and the print on the board!
Yeah some MB's have the Front Panel connectors in big print so it's easy to see, but not many, I have issue's every time, even though I know where they go...got the lazy susan from Amazon, and the stand from the dollar store lol...it works well though...Thanks and have fun with your build...
✌️✌️ Thank you so very much for making it by my channel, Dennis. Bits of Real Panther here, returning you the love with a play *_in full_* (11.5 minutes) and a partying-down like #52! ✌️✌️ Here's wishing you and yours all the very best for your new year, dude! May it be your best one yet!
@@banana8988 Not sure why you'd want it but every MB Box has the same thing inside. If you need it for a project of some kind a local computer shop would likely be able to give you one.
So that point in the video is the HD Audio, gratz on getting two 3080's I can't find any of the newer GPU's...if there is something else let me know...have a great day...
My pc came with this mother board installed, and the instructions say I need to remove it to add the cpu, etc., the screws the instructions show aren’t in the same place as they are on the mother board?
So if you have this motherboard, you don' t need to remove it to install the CPU, it can make it easier but that depends on your level of skill and knowledge. If your using a CPU Cooler that needs the Brackets but there not there you can buy them on Amazon for about $7.00 Hope that helps. If you need help with the install of the CPU I've done a few videos on installing CPUs that will help you out. Good Luck
It would be nice to understand on a mb like this, how should be physically installed a thunderbolt interface and which other interfaces stop to work as a consequence.
@@JemsKomang Touch call on these two boards, there both great boards so it'll boil down to preference, I do like MSI and there software so might pick it for that reason...hope that helps...Thanks...
Sorry did I hear correctly, this has two gen4 M2 SSD slots? If yes great coz ye first slot may be an issue for your gpu to fit proper. Read a review on amazon uk that the gpu could not fit if the m2 nvme has simple heat sink
It has M.2 PCI Express module up to Gen4 x4 & and M.2 SATA3 6.0Gb/s module M.2 PCI Express module up to Gen4 x4 so unless I got it wrong yes...Yeah the way it's situated using the M.2 with a raised Heatsink on the M.2 would not allow the GPU to go in, I used a M.2 with just the heatsink from the MB and it worked great though...
That's a huge question with way to much to put here so to put it in a nutshell, It'd be a 3% loss from the x16 to the x8 on the other slot...however with a GPU that can do PCIe 4.0 you'd see as high as a 11% loss, it would be very difficult to notice to the eye for the most part though...a loss of about 40FPS in general though...
How's it going my friend another nice upload appreciate the information I ever attempt to build a computer I'll be calling you! That'll be a while for sure but thanks again. Hope you had a nice Thanksgiving, Merry Christmas. Hope all is well God bless bye for now your friend Ken
It's going well Ken, I'm always here to help if you ever decide to build one, we have a different Thanksgiving they you all, ours was in Oct...but it was very nice...hope you had a great Thanksgiving as well and a very Merry Christmas and New Year to come...God Bless...
Not to worry, I built a system for a hard core gamer, and they are still using it since this video was updated and it plays great for them and they've said they love it. So it'll be good. Have a great day!
I got the M.2 E Key, but it turns out you need to also buy the other parts, ie antenna, the wires that go to it and the plate that securs to the case...my recommendation is to get the Ubit Wifi, has Bluetooth and Windows recognizes it and it gives great WiFi Range and it's Dual Channel, I did a review on it and am still using it in my system...just search Ubit if interested...It's also cheaper then getting the M.2 Key and the other parts...Hope that helps...Thanks...
Uhhhh... So what do I do if I don't have a drive or any external to load that ancient DVD into...? Am I sol or will I atleast be able to download the driver's on their website..? This whole PC building thing is really starting to stress me out.
You can go direct to the Manufacturers website to download the driver's, the DVD just makes things easier in the beginning, but the website will have all the same software, will just take a bit longer to do...it's normal to get stressed building a PC, it happens to me all the time, there's always some little surprise I didn't expect, although not so much lately because I've now had more experience with the different products...so don't worry take your time and you'll do fine and once you've built it you'll be proud you did...although then you'll be addicted to want to do it more lol...Have a great day...Thanks...
How long will this board perform or live compared to Msi meg x570 ace since I’m really confused. I’m not an extreme gamer and don’t need overclocking most of the time. Processor is 3900x. Which will be a better board for me in the long run? Gaming some editing some presentation etc the usual
In my opinion this MB will work great for you, but the MSI Meg X570 is a better MB with a few more features but cost much more I believe...so either one will be great...Thanks...
Reviewing Playing & More RPM in my country msi x570 ACE is a bit cheaper! So do u suggest msi? Or should i opt for a different brand in a similar pricepoint. Kindly suggest
The X570 Phantom Gaming 4 is still a good choice, but the one that comes with WiFi would be a good choice, or the MSI X570 ACE is a really great MB, I'd actually put it as my first pick...
Can anyone come across such a question: ASRock X570 Phantom Gaming 4 mother, Ryzen 2600 processor, on the first M2 slot (from the processor) the SDD speed is 3500 and 3000 mb / s, on the second M2 slot (from the chipset) and also in the second PCI slot -E3.0x16 through a PCI-E M.2 adapter in PCI-E3.0x4 mode, the same SSD picks up speeds of 3000 and 2500 mb / s. Why is this and what could be wrong?
Not sure I can provide a good technical answer to this, but the first slot is usually faster then the 2nd M.2 slot. Normally it'd be that one was PCIe 4.0 and the other PCIe 3.0 but the specs say they are both the same so not certain unless the M.2s are rated differently. Which I could offer more.
This is a budget board and weird things like this happen. I tried putting a pcie card for an extra nvme slot and it disabled the LAN port on this board. Never bothered to figure it out. Also my cpu cooler won't face the back of the case in this board, the Hyper 212, it has to blow either toward or away from the GPU. wtf Asrock!
seems like a great unit!! whats your thoughts on doing a cross fire built with two rx570s? there so cheap on the used market and they seem to be a decent performer?
Yes it will work, however after getting the system up and running, I realized that you also will need to buy the bracket and two antennae's and need to connect the wires to the M.2 E Key to get any kind of good reception...so while this seems like a good idea, your better off buying a good WiFi Adapter and using it, a lot less hassle and easier to install and get working...Thanks...
@@Reviewing_Playing_and_More_RPM Thanks for the prompt reply. When you say WiFi adapter do you mean a PCIe x1 to M.2 Key E adapter? Also which WiFi adapter would you recommend?
I reviewed two, the best one is a Ubit, if you do a search on my channel it'll come up, was half the price of the other one's and it worked amazingly, I'm using it in my current system...Thanks...
@@Reviewing_Playing_and_More_RPM Thank you. I checked out your video of Ubit. It helped a lot. I've set my eyes on the Ubit AX WiFi 6 Dual Band 2974 Mbps AX200 PCIE Wireless WiFi Card with Bluetooth 5.0.
@@Reviewing_Playing_and_More_RPM Thanks. I read if the pin count is the same they're interchangeable as long as the BIOS supports the TPM version, which it should.
That's loaded with USB inputs! I guess that's to be expected with a gaming board though. What's the 12v RGB do? 2 is better than 1, I know that much haha. Not that most people are looking at it, but the front of that motherboard looks pretty cool!
bc im having problem with the ram i have now. i have the patriot viper steel 4400mhz ram and it wont let my speed go past 3066mhz and i am putting it on the xmp profile
The max support for Ryzen seems to be DDR4 3466MHz, I tend to try 3600MHz but have often found 3200MHz is where things work best with no conflicts, initially they say 3600MHz but it's not been my experience. So you could try manually putting it to 3466MHz and see if that works. Hope that helps
@@Reviewing_Playing_and_More_RPM yea I tried but it still won’t let me go past 3066. I did reviewers on the patriot ram and a lot of people said they don’t work good ryzen
Only real benefit which most won't take advantage of is the PCIe 4.0...otherwise you could get away with something else indeed...although I have this in my main system and before placing it in the case there was no noticeable noise from it at all...I do agree though, this was tried once before and was a disaster, however they claim they got it right this time...I'll have this system for some time so you can bet I'll let people know when and if it fails...Thanks...
I can't say which is better as they are very evenly spec'd and boil down to personal preference, The X570 has a bit better rating on some websites though in the reviews...good luck with your choice...
No unfortunately it's Crossfire but not SLI support...with NVidia there's not many doing SLI now so there lower end MBs no longer seem to support SLI...they only seem to offer it in the higher priced MBs for a while now...
Not sure what your referring to but yes chassis fan headers, sys_fan_headers, they are referred to by different names but if you meant something else let me know...Thanks...
If you mean the SATA Cables, then yes but it'll depend on whether you use more then the 2 provided, otherwise let me know if you meant something else and I'll get back to you...Thanks...
@@duckywucky8249 The Power Supply powers the Motherboard, and all it's components, ie USB, any HD's that would be used with it, and any other peripheral...The Front Panel wires come from the Desktop Case which connect to the Motherboard...Hope that explains it...Thanks...
yo good news i order my parts 16gb ram and this motherboard for a cheap price on amazon now 143.99 with ram was 211 with tax was 222.06 i scored a deal with amazon do not normally order from amazon cause the board was sold out at new egg it was brand new not refurbished wow.
AMD CrossFire is a brand name for the multi-GPU technology. The technology allows up to four GPUs to be used in a single computer to improve graphics performance.
No, there are some out there talking about VRMs most of which will never have an issue unless doing Hard Core Over Clocking...This is a great MB, I have built a system in it, and it runs fabulous, mind you I don't have a Ryzen 9 3950X in it, which only means that you'll get a bit more heat from the CPU none of which should be a worry...keep an eye on the temps and as long as there not extreme which they shouldn't be, then your fine...if they seem to high, then getting an aftermarket CPU Cooler better suited for this CPU is an option, or a water cooled system is another option...Overall, you will be very happy with this MB imo...hope that helps...Thanks...
Reviewing Playing & More RPM thank you very much for such fast & in-depth reply. this made me a lot more confident purchasing this mobo that is on its way!
*17.👍Have you ever thought about, doing a computer build and showing it step-by-step up-close-and-personal?* ... if you were able to do that that would probably give you new subscribers a lot of views I would think? Thanks for visiting God bless bye for now your friend Ken
Everyone always brings up the VRMs as a downside of this board. Some even going so far as saying that the massive heat sink will not do much by way of cooling. Ummm, Ok. As soon as I hear that I stop the video and move onto someone that may know what they are talking about. Been in the industry for over 30 years and that heat sink is heavy. Make sure you have good air flow in the case and you should never have issues with them unless you are wanting to massively overclock. In that case, if you have the inclination, a water cooler on them will work perfectly. Next Video. P.S. The two USB connectors below the gigabit ethernet RJ45 connector are not Gen 1, they are Gen 2.
bad layout. DIMM sockets too close to the PCI=E slot and back IO sockets also to close so hard to fit in a decent GPU. dont event try to fit water cooling cause the DIMM and CPU power socket and IO cooling plate is too close to the edge of the MB stopping the radiotor and fan from fitting.. corsair carbide 200 case. recomemened water cooling for it is the corsair H60i RGB pro XT. it wont fit cause of the MB layout being crap. Had to make adjustments to get the cooler to fit. radiotor fitted inside the case and the fan outside.. So instead of screwing the fan to the radiotor then screwing the assembly to the case i had to screw the fan to the radiotor from outside the case and make a hole for the cable to go through to fit inside the case. Cant change the BIOS setting to get the most out of my RAM and CPU cause it refuses to boot up unless i have default settings. Ryzen 9 3900XT 16GB trident Z RAM 3200Mhz but the BOIS only supports 1600Mhz. When i tried to make BIOS setting to get the RAM to work at the correct speed it refused to boot up just kept going back into BIOS. Another prob is it cant keep the correct time. Everytime i boot up i have to adjust the clock to the right time. IE yesterday the PC was saying 07.44 when the real time was 14.56. today it said 16.55 when it was 16.46. My old ASUS prime B350 plus gaming board is better. At least with that the liquid cooling fitted properly and it kept the correct time and could make changes to the BIOS to get the RAM at the correct speed. With this asrock MB making any changes to BIOS just puts it in a cycle of booting to BIOS and wont go into windows. Only got this board to try and get more power out of my CPU and RAM but its worse than my old MB. RAM speed doesnt even stay at the correct setting. sometimes its running faster than other times. IE sometimes its at 1500Mhz sometimes 1600Mhz. Even though BIOS has it as 2133mhz by default and refuses to let me boot up if i change it to 3200Mhz. It refused to even go to BIOS when i tried a Ryzen 7 3700x in it.
So many things that you mention I never had a problem with, but we all have different experiences, I had no issue's with getting to the BIOS, or OCing my Ram, no Re-booting or time I could go on. From all the issue's you mention it actually sounds like you may have encountered a Bad MB for sure if your having this many issue's, and with so many issue's it makes me wonder if you might have a virus as some of this behavior sounds like that. It's unfortunate you have had this many problems but not reflective of what many will encounter.
@@Reviewing_Playing_and_More_RPM switched back to my old ASUS prime B350 plus as the asrock kept shutting down my PC when i tried playing games on it. MB temps in BOIS were 80C, CPU was only 50c. in windows it was hitting 90c. start a game after 15 mins PC rebooting cause motherboard temps hitting 95c. with the B350 MB temps r only 35c. so its a cooling prob with the asrock board. think part of the prob is the MB cant handle the 12 core ryzen 9 3900XT where as the B350 is perfecty fine with it. heard a lot of ppl r having the same prob with the ryzen 9 on the asrock board.
I guess it depends on what your looking for, I go over all the main features most will be interested in. Let me know what you would like to see added and I'll include it in future videos.
Can you provide the source from which you are getting your info, or was it a personal experience, I'm interested to test this one to confirm and see if I can repeat this boot issue, and if so share in a video...Thanks...
man, this board is basic af. not bad compared to the others for the price, but i swear, every single generation we get fewer features for a higher price tag. even boards in the same series get more expensive for crappier components. (example-- the asus prime x370 > 470 > 570... ughh)
It is lacking a little, but overall it's one of the few MB's that I'm still using in a current system and it works great, your right prices have gone out of control, even before all the craziness that's going on now...overall it's a decent MB for the price...the best value now I think is the newer B550 MB's...take care...
Well , quite a low tier MB...Poor VRMs components...not sturdy enough for a 3900X+, Bios is terrible....only thing i ilike abt this board is the the WI-fi ( very impressive for the ax model and the Intel Ethernet controller...Beeing said not a good choice..........
Well your certainly welcome to your opinion, but this system is working great, no overheating issue's while gaming, and it has a 3700X that is working fantastic, VRMs are only bad when using extreme OC, so for the majority of people this will work great...
I'm not sure were you got your information from but this board's VRM heatsink can handle 150A 1.3V without airflow, that is a fully overclocked 3900x. Sure it will run at 93C but that is well in spec for these mosfets.
@@Reviewing_Playing_and_More_RPM i can get a build Ryzen 7 5800x 490$ Cooler master ml240 v2 rgb 90$ X570 phantom gaming4 165$ Team group delta rgb black ddr4 3200hz 16 gb 90$ Transend m. 2 nvme 500gb 75$ Rtx 3080 1075$ Cooler master mwe 750w gold fully modular 110$ From a local store
@@aliihsan162 wow your local store has the new CPU and GPU, well buy them now because they sell out fast...Nice choice of parts, It'll make for a great build...
Just ordered this board since most boards are sold out. Doing my first build in 20 years. Pairing with a 3600, 16gb DDR 3000 MHz memory, 1660 Ti GPU. Building a virtual pinball with a Vizio 4K 39” tv. Think I will be ok? Great video and thank you.
Yes, it'll be a really great build, I love Pinball...Thanks...
your build is very close to mine! i have a ryzen 5 3600 a gtx 1660 and 16gb ddr4 ram hopefully it will run some nice games at 1080p 🤞
Yes for sure you'll be able to, the CPU and GPU are more then able to run triple A games...and you've got plenty of Ram...enjoy...Thanks...
Nice review - I'm doing a build tonight with this board. I love the lazy susan with frame stand - that actually looked pretty pro. I'wish I had one of those fancy lighted magnifiers too. I'm getting to old to read these instructions and the print on the board!
Yeah some MB's have the Front Panel connectors in big print so it's easy to see, but not many, I have issue's every time, even though I know where they go...got the lazy susan from Amazon, and the stand from the dollar store lol...it works well though...Thanks and have fun with your build...
How do you like the board?
✌️✌️ Thank you so very much for making it by my channel, Dennis. Bits of Real Panther here, returning you the love with a play *_in full_* (11.5 minutes) and a partying-down like #52! ✌️✌️
Here's wishing you and yours all the very best for your new year, dude! May it be your best one yet!
Much appreciated man...Happy New Year to you as well...Thanks...
You're very welcome, dude!
Thank you very much mister, i was searching for this so long thanks, god bless you!
You're very welcome, glad it helped you out. Thanks
Really excellent video. Helped alot. Thanks!
Great to know it helped you out. Thanks
do you know if i can buy the cardboard that holds the board up from the sata, booklet, and the cd
Not sure what your referring to, let me know and I'll help you out.
The cardboard that you removed at 0:40 do you know where I could buy it and if I could I can’t find anything.
@@banana8988 Not sure why you'd want it but every MB Box has the same thing inside. If you need it for a project of some kind a local computer shop would likely be able to give you one.
5:42 - you lost me there. Rip, I bought (2) 3080's I need a x570. Can you help me by explaining that?
So that point in the video is the HD Audio, gratz on getting two 3080's I can't find any of the newer GPU's...if there is something else let me know...have a great day...
ill keep this in mind when im going to upgrade to a 3700x in the future thanks for the video!
No problem, it's a solid board...Thanks...hope your doing great...
My pc came with this mother board installed, and the instructions say I need to remove it to add the cpu, etc., the screws the instructions show aren’t in the same place as they are on the mother board?
So if you have this motherboard, you don' t need to remove it to install the CPU, it can make it easier but that depends on your level of skill and knowledge. If your using a CPU Cooler that needs the Brackets but there not there you can buy them on Amazon for about $7.00 Hope that helps. If you need help with the install of the CPU I've done a few videos on installing CPUs that will help you out. Good Luck
hello nice review, does this motherboard support bluethooth?
It doesn't from what I remember, you'll need a BT Dongle to get it.
@@Reviewing_Playing_and_More_RPM what is a bt dongle and where can I get it
@@eu8028 Bluetooth Dongle, and you can get one in a computer store, or online from amazon, newegg and others.
Nice looking board !! Looking forward to the build video using this !!
Thanks, just gotta find a nice case to put it in, and then it'll be good...Thanks...
It would be nice to understand on a mb like this, how should be physically installed a thunderbolt interface and which other interfaces stop to work as a consequence.
I'll do some research and testing and I'll do a video on it, great idea...Thanks...
Excellent job buddy you never cease to amaze me.
Thanks man, appreciate you like it...
will this motherboard be compatible with a Corsair elite capellix 360mm water cooling and a lian li cool tempered glass-black case?
Yes, but it more depends on the case then the MB, check your case specs to see what it will allow.
Great job on this unboxing and review on this product Dennis
Thanks Bob, much appreciated...
should i purchase this for 5600x . and i am not an overclocker ? Btw love ur review for this mobo
If you can still get one then it will be great. Yes the 5600X is still a great CPU as well. Thanks
@@Reviewing_Playing_and_More_RPM yea its is for 125 bucks new
That's not bad, better than what I paid for sure.
Good motherboard, for the price is actually one of the best!
Cool, I'm gonna do a build with it in the New Year and looking forward to it, my last one from ASRock was amazing...Thanks...
@@Reviewing_Playing_and_More_RPM this one or MSI MPG X570 Gaming Plus?
@@JemsKomang Touch call on these two boards, there both great boards so it'll boil down to preference, I do like MSI and there software so might pick it for that reason...hope that helps...Thanks...
how many fans can you plug into this excluding cpu fans and gpu fans
3 x System Fans/Water Pump Fan Connectors (4-pin) Smart Fan Speed Control/PWM...Thanks...
Sorry did I hear correctly, this has two gen4 M2 SSD slots? If yes great coz ye first slot may be an issue for your gpu to fit proper. Read a review on amazon uk that the gpu could not fit if the m2 nvme has simple heat sink
It has M.2 PCI Express module up to Gen4 x4 & and M.2 SATA3 6.0Gb/s module M.2 PCI Express module up to Gen4 x4 so unless I got it wrong yes...Yeah the way it's situated using the M.2 with a raised Heatsink on the M.2 would not allow the GPU to go in, I used a M.2 with just the heatsink from the MB and it worked great though...
what would be the performance loss if I have used the second VC slot due to a big air cooler preventing me to use the first slot? thanks kind sir..
That's a huge question with way to much to put here so to put it in a nutshell, It'd be a 3% loss from the x16 to the x8 on the other slot...however with a GPU that can do PCIe 4.0 you'd see as high as a 11% loss, it would be very difficult to notice to the eye for the most part though...a loss of about 40FPS in general though...
@@Reviewing_Playing_and_More_RPM currently on 3070 at the moment with amd 5600x ..:"(
@@samsworld8280 It'll run fine, performance hit might not be to bad, more like 8% with the 3070 and that's a bit subjective...
How's it going my friend another nice upload appreciate the information I ever attempt to build a computer I'll be calling you! That'll be a while for sure but thanks again.
Hope you had a nice Thanksgiving, Merry Christmas. Hope all is well God bless bye for now your friend Ken
It's going well Ken, I'm always here to help if you ever decide to build one, we have a different Thanksgiving they you all, ours was in Oct...but it was very nice...hope you had a great Thanksgiving as well and a very Merry Christmas and New Year to come...God Bless...
Hello i just this MB and im worried cause i see so many bad reviews and im terrified is this MB good last 2 years?
Not to worry, I built a system for a hard core gamer, and they are still using it since this video was updated and it plays great for them and they've said they love it. So it'll be good. Have a great day!
Great review buddy & Merry Christmas!
Hey man, much appreciated...you have a Merry Christmas! as well...Thanks...
Anyone have success removing that x570 Phantom Gaming 4 fan plate? The fan is making noise. I removed the 2 screws but its still stuck
I haven't tried to remove a fan from an X570 so unfortunately can't help, I hope someone is able to help you out though.
I just ordered this board. Do you have any M.2 Wifi / BT card you could recommend that would be compatible? Thanks!
I got the M.2 E Key, but it turns out you need to also buy the other parts, ie antenna, the wires that go to it and the plate that securs to the case...my recommendation is to get the Ubit Wifi, has Bluetooth and Windows recognizes it and it gives great WiFi Range and it's Dual Channel, I did a review on it and am still using it in my system...just search Ubit if interested...It's also cheaper then getting the M.2 Key and the other parts...Hope that helps...Thanks...
@@Reviewing_Playing_and_More_RPM Thank you
I just bought this board. First time pc builder. My question is what kind of rgb case fans does this support?
It has RGB and Addressable RGB Headers so any RGB Fans will work with it...Thanks...
Reviewing Playing & More RPM No thank you!
Uhhhh... So what do I do if I don't have a drive or any external to load that ancient DVD into...? Am I sol or will I atleast be able to download the driver's on their website..? This whole PC building thing is really starting to stress me out.
You can go direct to the Manufacturers website to download the driver's, the DVD just makes things easier in the beginning, but the website will have all the same software, will just take a bit longer to do...it's normal to get stressed building a PC, it happens to me all the time, there's always some little surprise I didn't expect, although not so much lately because I've now had more experience with the different products...so don't worry take your time and you'll do fine and once you've built it you'll be proud you did...although then you'll be addicted to want to do it more lol...Have a great day...Thanks...
Will the 3600 post on this board without needing a bios update first?
Yes it will, no BIOS out of box needed...
How long will this board perform or live compared to Msi meg x570 ace since I’m really confused. I’m not an extreme gamer and don’t need overclocking most of the time. Processor is 3900x. Which will be a better board for me in the long run? Gaming some editing some presentation etc the usual
In my opinion this MB will work great for you, but the MSI Meg X570 is a better MB with a few more features but cost much more I believe...so either one will be great...Thanks...
Reviewing Playing & More RPM in my country msi x570 ACE is a bit cheaper! So do u suggest msi? Or should i opt for a different brand in a similar pricepoint. Kindly suggest
The X570 Phantom Gaming 4 is still a good choice, but the one that comes with WiFi would be a good choice, or the MSI X570 ACE is a really great MB, I'd actually put it as my first pick...
Can anyone come across such a question: ASRock X570 Phantom Gaming 4 mother, Ryzen 2600 processor, on the first M2 slot (from the processor) the SDD speed is 3500 and 3000 mb / s, on the second M2 slot (from the chipset) and also in the second PCI slot -E3.0x16 through a PCI-E M.2 adapter in PCI-E3.0x4 mode, the same SSD picks up speeds of 3000 and 2500 mb / s. Why is this and what could be wrong?
Not sure I can provide a good technical answer to this, but the first slot is usually faster then the 2nd M.2 slot. Normally it'd be that one was PCIe 4.0 and the other PCIe 3.0 but the specs say they are both the same so not certain unless the M.2s are rated differently. Which I could offer more.
This is a budget board and weird things like this happen. I tried putting a pcie card for an extra nvme slot and it disabled the LAN port on this board. Never bothered to figure it out.
Also my cpu cooler won't face the back of the case in this board, the Hyper 212, it has to blow either toward or away from the GPU. wtf Asrock!
Awesome job on this video as usual Dennis.
Nicely done! 😉👌 Enjoyed in full and leaving a like👍
Always appreciated John, glad you liked it...Thanks...
Nice review Dennis, hope you enjoyed your Thanksgiving brother!👍
Thanks man...Hope you had a great one as well...
Does it have debug LEDs?
Yes it does, the normal CPU, VGA for Graphics, DRAM and BOOT.
@@Reviewing_Playing_and_More_RPM Solid, thanks!
Maybe a silly question but, Is this motherboard compatible with elgatohd60pro? I want to connect my crucial p1 m.2 ssd and my elgatohd60pro
Thanks!
Yes this far exceeds the requirements of the Elgato HD60 Pro...and will work well with the Crucial P1 M.2 SSD...Thanks...
seems like a great unit!! whats your thoughts on doing a cross fire built with two rx570s? there so cheap on the used market and they seem to be a decent performer?
I'll give it some thought and see what I can get, but probably not because most programs don't take advantage of the dual cards any more...
hi i have a quest i have ryzen 5 2600 it will be good to this main board ?
Yes, it'll work great...
A question: Is the Intel AX200NGW M.2 (2230) WiFi-6 Card compatible with this motherboard's M.2 Key E slot? Thanks.
Yes it will work, however after getting the system up and running, I realized that you also will need to buy the bracket and two antennae's and need to connect the wires to the M.2 E Key to get any kind of good reception...so while this seems like a good idea, your better off buying a good WiFi Adapter and using it, a lot less hassle and easier to install and get working...Thanks...
@@Reviewing_Playing_and_More_RPM Thanks for the prompt reply. When you say WiFi adapter do you mean a PCIe x1 to M.2 Key E adapter? Also which WiFi adapter would you recommend?
I reviewed two, the best one is a Ubit, if you do a search on my channel it'll come up, was half the price of the other one's and it worked amazingly, I'm using it in my current system...Thanks...
@@Reviewing_Playing_and_More_RPM Thank you. I checked out your video of Ubit. It helped a lot. I've set my eyes on the Ubit AX WiFi 6 Dual Band 2974 Mbps AX200 PCIE Wireless WiFi Card with Bluetooth 5.0.
6:08 That looks pretty cool the color etc
Yeah it's a great MB for a very nice price...Thanks...
Hi my friend, awesome unboxing vid 👍🏻😁
Thanks man...
Anyone know if the ASUS TPM will work on this board? Looks to be the same pin arrangement.
I did some searching but couldn't find anything definitive on whether it would or not, sorry...take care...
@@Reviewing_Playing_and_More_RPM Thanks. I read if the pin count is the same they're interchangeable as long as the BIOS supports the TPM version, which it should.
There are a lot that are but just didn't want to say for certain as I haven't tried it...Thanks...
Does this MB support DDR6 GPUs? i have searched and searched but cannot find an answer. Thank you.
Yes, the newer GPU's like the GTX 1660TI up to the RTX 2080TI will all work in these motherboards using DDR6...
@@Reviewing_Playing_and_More_RPM Excellent thank you so much :)
That's loaded with USB inputs! I guess that's to be expected with a gaming board though. What's the 12v RGB do? 2 is better than 1, I know that much haha. Not that most people are looking at it, but the front of that motherboard looks pretty cool!
Depending on what you are using ie a CPU Cooler, or LED Strip you will need either a 12V or 5V as they require different voltages...Thanks...
will this motherboard be compatible with corsair 32gb 3600mhz ram. And will the MB be able to run the 3600mhz speed?
bc im having problem with the ram i have now. i have the patriot viper steel 4400mhz ram and it wont let my speed go past 3066mhz and i am putting it on the xmp profile
The max support for Ryzen seems to be DDR4 3466MHz, I tend to try 3600MHz but have often found 3200MHz is where things work best with no conflicts, initially they say 3600MHz but it's not been my experience. So you could try manually putting it to 3466MHz and see if that works. Hope that helps
@@Reviewing_Playing_and_More_RPM yea I tried but it still won’t let me go past 3066. I did reviewers on the patriot ram and a lot of people said they don’t work good ryzen
@@Reviewing_Playing_and_More_RPM hey man I got it fixed. I wasn’t setting the infinity fabric dividers up right
@@jay1on463 I haven't even done anything with Infinity Fabric guess it's time I play around with it. Glad you got it going.
Why would i want a mainboard with a fan ? CPU & video card coolers make enough noise.
Only real benefit which most won't take advantage of is the PCIe 4.0...otherwise you could get away with something else indeed...although I have this in my main system and before placing it in the case there was no noticeable noise from it at all...I do agree though, this was tried once before and was a disaster, however they claim they got it right this time...I'll have this system for some time so you can bet I'll let people know when and if it fails...Thanks...
should I buy this one or the steel legend B550?¿And why?Thanks guys
I can't say which is better as they are very evenly spec'd and boil down to personal preference, The X570 has a bit better rating on some websites though in the reviews...good luck with your choice...
So it does sli?
No unfortunately it's Crossfire but not SLI support...with NVidia there's not many doing SLI now so there lower end MBs no longer seem to support SLI...they only seem to offer it in the higher priced MBs for a while now...
@@Reviewing_Playing_and_More_RPM ,so what about an x570f, £250, does that do sli?
If you mean the Asus Rog Strix X570-F Gaming then yes it supports SLI and Crossfire...Thanks...
@@Reviewing_Playing_and_More_RPM ,cheers
Channel fan? arent those chassis fan headers?
Not sure what your referring to but yes chassis fan headers, sys_fan_headers, they are referred to by different names but if you meant something else let me know...Thanks...
@@Reviewing_Playing_and_More_RPM At 6:14 you pointed to a header and called it a channel fan?
@@frontwing67 I misspoke, happens sometimes...sorry about that...
@@Reviewing_Playing_and_More_RPM Np, we all been there 😊
is the cables it comes with even enough to set it up?
If you mean the SATA Cables, then yes but it'll depend on whether you use more then the 2 provided, otherwise let me know if you meant something else and I'll get back to you...Thanks...
Will the psu supply the usb 3.0 and front panel wires n stuff like that? Or is the mother board supposed to supply it
@@duckywucky8249 The Power Supply powers the Motherboard, and all it's components, ie USB, any HD's that would be used with it, and any other peripheral...The Front Panel wires come from the Desktop Case which connect to the Motherboard...Hope that explains it...Thanks...
Reviewing Playing & More RPM so it comes with the case?
Yes the cables to connect to the Motherboard come from the Case...Thanks...
does this motherboard have any 3pin fan slots?
A 3 pin will work in a 4 pin sys fan header...
does this motherboard work with EVGA GeForce RTX 2070 SUPER XC ULTRA GAMING Overclocked Dual-Fan 8GB GDDR6 PCIe 3.0 Graphics Card?
Yes, it'll work great...Thanks...
@@Reviewing_Playing_and_More_RPM ,what about 2 of them?
Very interesting review. Great motherboard. Greetings my friend and have a nice new week. 👍24
Yeah, it's got pretty much everything, at a great price...Thanks...
Does this motherboard have on board WiFi, and if so, how do you use it
It doesn't but it does have a M.2 Key WiFi, I did a separate video talking about it actually...Thanks...
Thanks man!
Anytime...
3700x, 64 GB and x570 ASrock 4S. Will I be okay?
Yes, it'll work great...Thanks...
can i put a 1660 ti gaming x in this Motherboard bro?
Absolutely, it'll take any modern GPU...Thanks...
yo good news i order my parts 16gb ram and this motherboard for a cheap price on amazon now 143.99 with ram was 211 with tax was 222.06 i scored a deal with amazon do not normally order from amazon cause the board was sold out at new egg it was brand new not refurbished wow.
Great deal...coming together...Thanks...
where do I put ssd samsung
Use the slot that says Hyper M.2
@@Reviewing_Playing_and_More_RPM thanks it worked
What the heck is cross fire I have heard this phrase lots but don’t get what the heck it means
AMD CrossFire is a brand name for the multi-GPU technology. The technology allows up to four GPUs to be used in a single computer to improve graphics performance.
Well I'm slow getting back to you but nice community has helped with the answer, Timur is spot on...Thanks...
does it have pre built in wifi
No but you can buy this same board but with WiFi, same name just an added feature, probably cost a bit more...Thanks...
Reviewing Playing & More RPM. Thanks for the heads up the one that I saw on Amazon has WiFi but I could just Ethernet cord
i bought this for my ryzen 9 3950x, am i going to regret it?
No, there are some out there talking about VRMs most of which will never have an issue unless doing Hard Core Over Clocking...This is a great MB, I have built a system in it, and it runs fabulous, mind you I don't have a Ryzen 9 3950X in it, which only means that you'll get a bit more heat from the CPU none of which should be a worry...keep an eye on the temps and as long as there not extreme which they shouldn't be, then your fine...if they seem to high, then getting an aftermarket CPU Cooler better suited for this CPU is an option, or a water cooled system is another option...Overall, you will be very happy with this MB imo...hope that helps...Thanks...
Reviewing Playing & More RPM thank you very much for such fast & in-depth reply. this made me a lot more confident purchasing this mobo that is on its way!
No problem, have fun with your build, and rock them games or whatever you chose on a kick butt system...all the best...Thanks...
*17.👍Have you ever thought about, doing a computer build and showing it step-by-step up-close-and-personal?*
... if you were able to do that that would probably give you new subscribers a lot of views I would think?
Thanks for visiting God bless bye for now your friend Ken
Did one a few times, but will be doing another in the New Year...Thanks...
This is a total budget board. My Hyper 212 CPU cooler wont face the back of the case, you should install it and see yourself.
It is more a budget MB but I personally liked it, but it might not be for everyone.
Is this mb good for overclock
Yes, it'll work great...Thanks...
Everyone always brings up the VRMs as a downside of this board. Some even going so far as saying that the massive heat sink will not do much by way of cooling. Ummm, Ok. As soon as I hear that I stop the video and move onto someone that may know what they are talking about. Been in the industry for over 30 years and that heat sink is heavy. Make sure you have good air flow in the case and you should never have issues with them unless you are wanting to massively overclock. In that case, if you have the inclination, a water cooler on them will work perfectly. Next Video. P.S. The two USB connectors below the gigabit ethernet RJ45 connector are not Gen 1, they are Gen 2.
Appreciate your input. Thanks.
🔥
Thanks...
bad layout. DIMM sockets too close to the PCI=E slot and back IO sockets also to close so hard to fit in a decent GPU.
dont event try to fit water cooling cause the DIMM and CPU power socket and IO cooling plate is too close to the edge of the MB stopping the radiotor and fan from fitting.. corsair carbide 200 case. recomemened water cooling for it is the corsair H60i RGB pro XT. it wont fit cause of the MB layout being crap.
Had to make adjustments to get the cooler to fit. radiotor fitted inside the case and the fan outside.. So instead of screwing the fan to the radiotor then screwing the assembly to the case i had to screw the fan to the radiotor from outside the case and make a hole for the cable to go through to fit inside the case.
Cant change the BIOS setting to get the most out of my RAM and CPU cause it refuses to boot up unless i have default settings.
Ryzen 9 3900XT 16GB trident Z RAM 3200Mhz but the BOIS only supports 1600Mhz. When i tried to make BIOS setting to get the RAM to work at the correct speed it refused to boot up just kept going back into BIOS.
Another prob is it cant keep the correct time. Everytime i boot up i have to adjust the clock to the right time. IE yesterday the PC was saying 07.44 when the real time was 14.56. today it said 16.55 when it was 16.46.
My old ASUS prime B350 plus gaming board is better. At least with that the liquid cooling fitted properly and it kept the correct time and could make changes to the BIOS to get the RAM at the correct speed.
With this asrock MB making any changes to BIOS just puts it in a cycle of booting to BIOS and wont go into windows.
Only got this board to try and get more power out of my CPU and RAM but its worse than my old MB.
RAM speed doesnt even stay at the correct setting. sometimes its running faster than other times. IE sometimes its at 1500Mhz sometimes 1600Mhz. Even though BIOS has it as 2133mhz by default and refuses to let me boot up if i change it to 3200Mhz.
It refused to even go to BIOS when i tried a Ryzen 7 3700x in it.
So many things that you mention I never had a problem with, but we all have different experiences, I had no issue's with getting to the BIOS, or OCing my Ram, no Re-booting or time I could go on. From all the issue's you mention it actually sounds like you may have encountered a Bad MB for sure if your having this many issue's, and with so many issue's it makes me wonder if you might have a virus as some of this behavior sounds like that. It's unfortunate you have had this many problems but not reflective of what many will encounter.
@@Reviewing_Playing_and_More_RPM switched back to my old ASUS prime B350 plus as the asrock kept shutting down my PC when i tried playing games on it. MB temps in BOIS were 80C, CPU was only 50c. in windows it was hitting 90c. start a game after 15 mins PC rebooting cause motherboard temps hitting 95c. with the B350 MB temps r only 35c. so its a cooling prob with the asrock board.
think part of the prob is the MB cant handle the 12 core ryzen 9 3900XT where as the B350 is perfecty fine with it. heard a lot of ppl r having the same prob with the ryzen 9 on the asrock board.
Heyyy friend how are you? 🙂 watching... hope you had a good day today
Hi man, having a great day actually...many Thanks...
@@Reviewing_Playing_and_More_RPM welcome brother Dennis 🤠👍🏻 that's so good to hear. God is so good.
Saludos desde España, gracias la información. :) +1
Eres muy bienvenido. Gracias
@@Reviewing_Playing_and_More_RPM Gracias :)
so it doesnt have 3 pcie slots but 2 pcie 4 slots? thats stupid
Yeah, but a lot of MBs don't have 3 PCIe slots on them, and this is a budget MB version...Thanks...
@@Reviewing_Playing_and_More_RPM god bless microcenter
We have only one PC Store in Canada now, I wish Microcenter would open some stores here...
Maybe its me, but this is not a review. Just unboxing an overview.
I guess it depends on what your looking for, I go over all the main features most will be interested in. Let me know what you would like to see added and I'll include it in future videos.
Do not use or pair with G skill Ripjaw 3600mhz c18 with this board. It won't boot or work.
Can you provide the source from which you are getting your info, or was it a personal experience, I'm interested to test this one to confirm and see if I can repeat this boot issue, and if so share in a video...Thanks...
man, this board is basic af. not bad compared to the others for the price, but i swear, every single generation we get fewer features for a higher price tag. even boards in the same series get more expensive for crappier components. (example-- the asus prime x370 > 470 > 570... ughh)
It is lacking a little, but overall it's one of the few MB's that I'm still using in a current system and it works great, your right prices have gone out of control, even before all the craziness that's going on now...overall it's a decent MB for the price...the best value now I think is the newer B550 MB's...take care...
Well , quite a low tier MB...Poor VRMs components...not sturdy enough for a 3900X+, Bios is terrible....only thing i ilike abt this board is the the WI-fi ( very impressive for the ax model and the Intel Ethernet controller...Beeing said not a good choice..........
Well your certainly welcome to your opinion, but this system is working great, no overheating issue's while gaming, and it has a 3700X that is working fantastic, VRMs are only bad when using extreme OC, so for the majority of people this will work great...
I'm not sure were you got your information from but this board's VRM heatsink can handle 150A 1.3V without airflow, that is a fully overclocked 3900x. Sure it will run at 93C but that is well in spec for these mosfets.
Hi!) Nice product!) Good review!) L33_
Much appreciated...Thanks...
liked it
Thanks...
awrarabox !
Is that me mis-speaking or ? I do it sometimes, sorry if that's what it was.
@@Reviewing_Playing_and_More_RPM that's just me excited after watching your video and opening mine :)
@@MrCroky123 Nice
Review??? I didn't see any review.
Ok.
Will it handle a r7 5800x?
Yes easily...if you can get one, I was trying to get one myself...
@@Reviewing_Playing_and_More_RPM i can get a build
Ryzen 7 5800x 490$
Cooler master ml240 v2 rgb 90$
X570 phantom gaming4 165$
Team group delta rgb black ddr4 3200hz 16 gb 90$
Transend m. 2 nvme 500gb 75$
Rtx 3080 1075$
Cooler master mwe 750w gold fully modular 110$
From a local store
Its overpriced but giving the current setuation of the market its not that bad
@@aliihsan162 wow your local store has the new CPU and GPU, well buy them now because they sell out fast...Nice choice of parts, It'll make for a great build...
@@aliihsan162 Yeah everything is overpriced these days...