WEG CFW500 VFD, remote control, 2 wire control, 3 wire control, parameter set up.( English )
ฝัง
- เผยแพร่เมื่อ 20 ธ.ค. 2020
- WEG CFW500 VFD, remote control, 2 wire control, 3 wire control, paramater set up.For manuals , related videos and parts please see below.
CFW500 Manual: static.weg.net/medias/downloa...
WEG CFW500 Drive: www.ebay.co.uk/itm/333832974577
Direct contact on Linked in: / ingus-sudints-1b2a2517a
Website: igselectronics.co.uk/
eBay store: www.ebay.co.uk/str/igselectro...
WEG CFW500 VFD, local control, commissioning, Parameter set up and Factory reset: • WEG CFW500 VFD, local ...
Run a 3 phase motor on single phase power, basics: • Run a 3 phase motor on...
Single phase to 3 phase VFD drive home setup: • Single phase to 3 phas...
Single Phase / Tree Phase Inverter 3 Wire Control Station: igselectronics.co.uk/products...
Single Phase / Tree Phase Inverter 2 Wire Control Station: igselectronics.co.uk/products...
Multi frequency control Station: igselectronics.co.uk/products...
MOP/Electronic Control Station: igselectronics.co.uk/products... - วิทยาศาสตร์และเทคโนโลยี
I would advise you not to rely on that zip tie holding down the pin on the motor axle. Sure right now you are turning it slowly but I have seen those buggers fly into windows and people. Don't underestimate the centrifugal force.
Great can you show me in video how to wiring the VFD 2,2 kw at :
+ fuse
+ safety relay
+ filter
+ braking resistor
+ contactor
+ e-stop
+ reset button
+ switch main power
There might be series in future of that.
The STOP push bottom is NORMALLY CLOSED OR NORMALLY OPEN ???
The estop set up you have shown is not appropriate .Power supply
This typical installation using CFW500 with Safety Functions fulfils requirements for safety performance
SIL 3/ PLe and Cat. 4, according to EN ISO 13849-1 and IEC 61508, Stop Cat. 1, according to IEC 60204-1.
CH1|
CH2
6001
PBWTY + BESG
(self-monitored emergency push-button)
CSW-CK2F45-WH
國08
CFW500 with CFW500-SFY2
plug-in module
Do you have any troubleshooting videos?
Hi Conner, just these 3 videos for this drive.
Please give me instruction manual.
It in the description.
Please share the wiring detail.. 🙏🙏
And parameter setting
Everything i had to share is in the video my friend.