Building The Graviflyer "Testing Everything"
ฝัง
- เผยแพร่เมื่อ 26 ก.พ. 2024
- This is to show where I am at in building Alexey's graviflyer.
Thingivese stl files ion thruster
www.thingiverse.com/thing:608...
dc flyback to foil
• DC Flyback To Flatten ...
Resonance VS Resonant Frequency
• Resonance VS Resonant ...
ion thruster test
• New design ionic thrus...
Tesla coil pulse coil
• Tesla coil excited by ...
profile.php?...
I am going live on my channel on 4-22-2024 at 4pm to answer questions on the graviflyer. th-cam.com/users/livevwVBbczctnA
Hope to see you there.
try ruby . why ?: look at the base properties. you made a point that it must be better than the foil well what is a ruby made of ? the purest forms of what? i am no teacher/chem .bioligist but i know what a ruby is made of and i am a good listener . maybe you can use the purities of a ruby to get what you need .
Thank you ! I will be up and running soon too :)
@@duermalibreysano-duermacon8742think broad range opals are enuff!
I've looked at two problems, 1. anti-gravity and 2. invisibility, with a simple approach...
Just flip gravity or reflect light.
Same thing with dust- just flip the polarity of the particles in the paint or the coating- and you have a car that's always shining - even in dust storms.
We just need to a method and a machine of some kid to do that. And you just flip the gravity as far as the footprint goes.
The concept of anti-gravity is simple, every single object in the universe have its own "location properties" in spacetime, and every location have its unique properties.
If we can read those properties, isolate our ship, and change our location properties in spacetime, then bombards with either electromagnetic/ultrasonic energy. Our ship will jump to our desired locations based on our reading from the unique properties, in no time.
So it's not an anti-gravity, it's just moving in spacetime.
We just didn't allowed yet, to use this technology by our watchers.
Sir, i wish you well. Learned a lot here.
Thank you sir for showing your experiments by watching your videos, i came to know which things are gonna work and which things are not gonna work and i am doing research on Anti-gravity phenomenon and your videos gave me so many insights on this. thankyou again your videos are really awesome
thanks to invest your time to get all the knowledge from the original video, since we all get intrigued by the flying disk .
the science behind what you did is amazing, thanks so much!
thank you
Great content, thanks for your time and for sharing your knowledge!!
Thank you so much for this video.
7.8 Hz to 16Hz FM PWM @ 3 on 9 off use 12 volts dc square wave pulsed into a
bi-filar resonant coil
This video was incredible....Really game me a better understanding of what is happening. Im looking forward to next vid
Awesome work and even more awesome is your ability to teach it ! subscribed , Thank you !!
Great info and good explanation i look forward to the next videos 👍🙏
Footage was fake....it looked like a fishing line attached
I saw a second one fly. It is real.
@@nathanbunten4299are you saying you have seen one in real life?
@@Noble3dprintersLLC I have not seen on infront of me.
This is an exceptional video! I am so glad I found your channel and I wish you great success in your future endeavors!
gyroscopic stabilization. a hollow center disk would resonate well. the foil sticking down to the table is a capacitative effect. i'd wager theres metal on the table on the underside, the wood tabletop becomes a dielectric, the metal in the underside becomes thenother plate of the capacitor
I work with Tim Ventura and APEC people who are also working on the graviflyer. I also chatted with Alexey with a scientist on the phone. You have the graviflyer analyzed fairly well but not perfect. The gravifler is not made of three aluminum disks but two CDs (polycarbonate like balsa wood) with aluminum on one side and Al2O3 on the other side and the large aluminum disk in the center. The aluminum is outwards on the top and the bottom of the CDs and the Al2O3 is inwards, so the high voltage does not arc, and the magnets do not demagnetize with the applied high voltage. The top CD has the positive on the top and the negative on the bottom and the bottom CD has the positive on the top and the negative on the bottom or vice versa as I am not sure which way the positive and negative are aligned. The force will then only go outwards. The charge on the CD disks and the high voltage ionizes the air on the top and bottom of the graviflyer and the spinning magnets then push the top and bottom air down and upwards so there is a vacuum above and below the graviflyer so the device acts as a hot air balloon and lifts upwards. It is not anti-gravity. Alexey sends the incorrect kits to keep this secret so he can make money and make a living. The ultrasound device puts the graviflyer in a harmonic mode as you describe and when the harmonic mode is reached, he pushes a button on his electronic controls to make the final push to make the air evacuate so the device lifts upwards in one blast. The large disk is in the center to keep the vacuum on the top and bottom separated.
Dude, good facts! Where can I find this graviflier? I am new to this hobby and can't wait to experiment.
Как Алексей живет? Он работает над своим гравилетом или уже нет?
24:33 anything with mass spinning is after all a gyroscope
This might be a dumb idea but for a cheap experiment what about a 12" or larger speaker close but facing away so the movement of the cone doesn't effect the air near the craft. play a a constant bass frequency as low as speakers can handle very loud slowly raising frequency. If someone has a whoofer box in their car all you would need is 10 to 20 ft of speaker wire to run from their amp to speakers in shop have them play the tones from their car. Box probably needs to be on floor under table where craft is so it resonates through table. Shoulf be an app to Bluetooth to car radio where you can play different frequency. If the goal is to get the craft to vibrate at a certain frequency this would be a simple test. Cons: neighbors wont like it and everything else in your shop will be vibrating also. Lol. This probably won't work but by thinking was to overpower the resonance the craft is already making by force.
Amazing.... People who invented over unity were technicians and line men's. They run device in their garage and connect it to house wiring. The people who have masters and PhDs try to dismantle it and connect to oscilloscope, but at the end of the day they are not going to extract anything out of it.
Brilliant Research & Development 😉
What if you spread the weight over the whole disc by magnetizing the whole plate somehow?
Try this one for size:
Bottom most layer: Circular Aluminium Sheets and Circular Kapton Tape Stack (+ / - each layer)
First rotating module: Closed liquid mercury pool (leak proof/vaccum sealed)
Second rotating : Close liquid mercury pipe from center to top flat circular reservoir (leak proof/vaccum sealed)
Both mercury pools will self rotate upon correct power connection. Multi-point, switched power interface
Outside shell/top bottom split (crucially electrically isolated from everything except bottom alum/kapt capacitor stack)
(Capacitive stack will need to be increasingly thicker as size/load increase)
Very very cool! Keep up the great work!!
thank you.
Finally, someone that uses their brain and actually tests these models
thank you
What you did is amazing thank you for sharing all the information and contributing to the scientific research. The presentation that you made It’s just amazing. God bless you.This is what a real researchers do by sharing the knowledge to benefit everyone.
thank you
@@nathanbunten4299 again thank you I’ve benefitted greatly from your presentation and the knowledge you have shared. thank you for your time and effort To bring this information forward. I have been struggling for the past two years to understand what was going on. I made five different models and everything you said you have been spot on exactly.👍
@@nathanbunten4299 if I have any new information or I have success, I would definitely get in touch with you no doubt about that
@@samjall It shows when you do the tests. I have been doing a lot more on this thing. I have moved away from really high voltages to sound and harmonics. I also built a tesla coil circuit that will work all day long. I also have the right ultrasound circuit. This is one of the most intriguing projects I have ever done.
@@nathanbunten4299 even if I did not succeed, at least I’ve benefitted greatly from your information. You have no idea I was very frustrated and I was struggling to understand why it did not want to work and you have pointed every single mistake I made, watching your presentation. It’s like I was in a dark room and All of a sudden somebody opened the door to light show lol I am sure there are thousands of others like me. You shorted the distance for hundred or thousands of people so they can pick up where you Finished And that is lots of time and frustration they don’t have to go through
Buddy, you just made my year
your welcome
Electrostatic wind... Try this, has to be paired , has to be synchronized ... out of balance gyroscope that accelerates on one quarter of rotation only, and it throwing the weight toward the sky... the weight is traveling very fast at the top of the rotation and is slowing as it is coming down to the bottom of rotation... the mass traveling very fast at the top of the rotation has more inertia than the slower rate of rotation during the tough of the circle....
Have to be in pairs , one on each side of craft, and have to be like 6 or more of them, 6 of them lift in a triangle configuration where there are two in each corner, and they all have to be lifting at the same time, (synchronized). I cannot send no pictures that are easy to understand...
Unfortunately, watching the videos of the device in flight it is easy to see that it rises in "jerks".
This occurs when the nylon is pulled through the pulleys to raise it.
In other videos he touch the discs when they should have high voltage, the rest is the same as always, you will never get it to take off because there is a magic frequency that you will never find.
The antigravity is there, but in two PC fans, two aluminum disks and a flyback, I doubt it.
All the best.
I agree
Yeah its clear it was a hoax yet these people just keep pushing forward despite no one having any success because... it was a hoax. An obvious hoax at that. Huge waste of curiosity in my opinion.
There is no way at this energy anything you are doing with electrostatics is affecting gravity in any way, many orders of magnitude off lol. Also, the big to small thing cracked me up, thats just sooo wrong, i think he might've not showed the initial state of the system (he charged the little middle piece that goes up or down) before hand to bias it so that no matter what it will go down. Silly stuff
Great video and educational as well!
Thank you!
So Im casually flipping through TH-cam late at night and "just so happen" to discover an antigravity vid.I like where this is going. Next up Imortality 👌🏾
thank you
@@nathanbunten4299I enjoy how you don't steep down to the troll's level. You are magnanimous, good sir.
@@shawncalderon4950 thank you.
O think some kind of vibrating sound piezoeletric needs to be jointed to the air frequency. Some another thing is that pressure and tempreature may interfere
What you need to control the resonant frequency. is alot of different sized piezoelectric transducers rated for a wide range of resonance, with potentiometers attached to each one for extremely fine tuning capabilities for the tuning forks. This would allow you to program controls for resonant frequencies across multiple resonant chambers which would then allow control of direction, as well as lift.
I agree
Subed! Nice videos love your projects!!!
Never stop thinking outside the box. The people who never picked up a screw driver who give "their 2 cents" will never build anything!! The future developments belong to us who will get our hands dirty, fail, and keep moving forward!
great video mate, doing well, all the best.
Seriously? Did you look at the fakery that Alexey pulled off ?
Do you think we need to consider the MHD effect? It's one of the theories for antigravity effect. Plus, most studies of UFO encounter said the buzzing and Mercury engine. Mercury engine works like the magma inside the Earth. The mercury spins around a magnet which is also spins in the opposite direction thus creating magnetic field around itself.
they both produce energy fields. It might be the interaction or just the accumulation of charge.
Being that Aluminum is 57.9 Resonance? Then perhaps multiplying by 2 and so onward then ought we more precisely match the rotation frequencies by x2 multiples of? Or is that roughly the 600 rpm you mentioned?
A Tesla Coil, ultrasonics, magnets, counter rotation,a bunch of weird circuits and a length of string.
Of course it will work.
lol.
Wow, you found the resonant frequency scaling for the materials. I had a similar insight into the same effect on engines and horsepower scaling. The word sinusoidal isn't really understood despite it being used frequently.
😮 classic ufo shape, very interesting. Just saw other videos from you. You build very cool things, I thought tesla coils were awesome. You bring it to the next level ❤
thank you for that.
Dude you should ALWAYS test it hanging from ceiling because that lets you keep in balance and will show lift better and keep it from stuttering around on platform.
What happens if you cut the string lifting it?
I do question the validity of some of Alexis' claims but learned a lot from this TH-cam channel.
Really enjoyed your video I can only imagine the amount of work went in to it.
It took almost a year. I am in the process of making a new graviflyer right now. Testing killer my other one. I will keep working on it until it works.
I cant wait to see the new video congrats im new sub and this is crazy af 😮 but love it
thank you.
If you have access to a lathe to make ur plates you can get a perfect center for rotating mass and can balance your magnetic plates more precise will help more with vibrations
Edit also did you try set it up using halbach array set up with ur magnets?
I heard that tt brown used a bismuth type insulator for his lifters, it was apparently a type of bismuth that repels rather than attract, the so called bismuth magnesium alloy material allegedly found from the Rosewell crash have been talked about as the same material tt brown was using, probably made via sputtering or something similar
Don't know about the magnetism. But the k value was through the roof. You could put millions of volts through it and never burn a hole through it. It is why his capacitor was so good.
From what I understand the original lifter video showed at first used a bismuth coating on that spinning disk. You can kind of see the texture on it.
The only drawback I noticed is one video they pointed out a shadow that appears to show a pole and a string when he tried doing it inside. :(
I think there is definatly something here, though. I've been fascinated with the idea for years. Electrostatics is key.
I believe gravity is nothing else other than Electrostatic cling on a macro scale. By taking a small object, and making a equal potential on the object you with to fly, you could then theoretically "float" similarly to a bubble being blown through a straw of water.
@@heliarc5186 I agree with you except the string and the coating. I have pictures of the original and it is just textured aluminum found at Lowes hardware store.
Also he built another one and it flys.
@@nathanbunten4299 I've seen the one outside. That one is hard to explain. And I certainly don't want to demote it.
I don't know the original builder personally. I just remember seeing a video in his house. And in comments someone called out it looked like it was on a string and stick in the video via shadow .. and when I saw it was hard to unsee.. but could of been an illusion.
Hmm. I thought I read a write up that mentioned it being bismuth. But then again it was in English so it may not of been written by him
@@heliarc5186 he definitely made it work. He was given a new iphone to make the next video. So I hope a better quality video will clear up everything.
I have derived great pleasure from viewing all of your visual presentations. My progenitor was engaged in the field of aerospace engineering, specifically in the domain of advanced propulsion systems. Upon the discovery of the elusive components, the factor of weight-or indeed, mass-will cease to be of significance. Beyond such statements, I remain a silent yet fervent advocate for the collective success of this exceptionally talented assemblage.🙏🏻
It all comes down to one factor. If it doesn't resonate enough then you fail. It is and always has been that on factor. Thank you.
@@nathanbunten4299 Did you see that ion thruster boat project from plasma channel? that one was fun!
Öähiöljsqläöoäslöäwöqxqöklqshsksölksöl
Wålflööälöpävlqkköösöhälälqlslkqqköqllqdssqqlaäööösklökölsllhöskqqqqlhklklöpslslqqösllksqöqllaäqlszäsqqaqlöslöqsqslqkkqkllssakhö
Ssöööövööåqä,, ,, ,,
@@nathanbunten4299🔴 What Is Islam?
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
@@nathanbunten4299 so youre saying that the fundamental concept of electric gravity propulsion works?
Also, try sealing two plates in air tight container, with bottom of plate exposed. Just seal the gap, between both plates, and pressurize. Test different pressures and voltages. Air (gas) pressure is key, for higher voltages.
To keep the slayer exciter throwing sparks is to have no top load. You are correct that the spark gap Tesla is more powerful.
The graph at 57:00, what are the axes?
Horizontal (x) is I understand frequency, but what is the vertical axis (y)?
Can you please explain what you mean by the frequency of Al?
The whole craft is al. so you need a frequency to resonate it. It will be a big sound of vibration. It will not just work on your oscilloscope, The frequency is lower than a tuning fork will be. You have to create an imbalance in the metal.
Amazing.
thank you
Dude the video of a video is brilliant! And 63,000 views! Nice work!
thank you.
Holy moly roswell makes sense now. What you showed was probably what they were testing in a large format and wrapped it in that aluminum air balloon stuff
I have watched Alexey's graviflyer for years hoping someone would explain it in English so I could understand it better and have ago at building one, thanks for your work and info, wish you all the best.
Thank you
I've had this in my head for thirty five years. Mine is a lot larger with the different system of rotating the apparatus.
Really interesting same research. 👍🌞
btw seems if you put a bearing there you might get some movement and the shake just shows there's pressure at a point if it wanting to move just gotta find the way it wants to go fine tuning perhaps
Are you using the same metal for all parts? The disc have to be different metal, anode cathode
great video cant wait to see your new experiments im building high power capacitors at the moment to see if i can get any type of lifting effect if i find anything ill let you know.
Can't wait to see it.
Good video I think if you are looking to get the middle plate to resonate. I would look into how cimbals are made an tuned or other types of musical instrustments. Vibration and frequency will be apart of all advancements in the future of most if not all technololgy.
I agree
Thanks for this explanation. Would you have the type or model number of the piezo ultrasonic speaker you recommend to use, and the necessary frequency response range? I have those within the 2-60 kHz range, but heard comments from your group videos regarding frequencies up around 100 kHz. Thanks!
this the one I bought. www.amazon.com/dp/B0B2QSQNB2?ref=ppx_yo2ov_dt_b_product_details&th=1
@@nathanbunten4299 Thank you
I have a long running theory that the frequency required for the antigravity space ship would be 432Hz.
432 Hz
Unlike the standard tuning of 440 Hz, which is used in most music today, 432 Hz is said to be mathematically consistent with the patterns of the universe. It is often referred to as the "frequency of the universe" or the "miracle tone.
This also falls into the range of the earth.
Radio wave experiments on the Imp 6 and 8 satellites have shown that the earth emits very intense electromagnetic radiation in the frequency range of about 50-500 kHz.
To get equilibrium or harmony in the frequencies is to achieve stasis or what appears to be antigravity.
@@ericthemidget9685 I just tested 426hz and it was closer than any other frequency yet. I will try 432hz.
I am looking for the frequency of aluminum. I tried 440hz it was ok 426 was really close but is not quite there. You might be right.
Could the frequency actually be dependent on the person's frequency. So each craft would be tuned to the person . Or two frequency the environment and the person
Now I am trying to understand.
what if you went to carbon fiber graphite ? I baked some up under compression and it rings like a bell also conducts electricity but it is very light weight .. also I took an almost dead 9v battery that still had six volts and powered a circuit built around a 27000mhz quartz crystal and created a resonance cascade but the current went so high it fried everything however I did see an almost invisible field radiating from it as it was backlit by some nearby LEDs just before it went toast .. dealing with two oposing electromagnetic fields at a specific resonant frequency will be a lot less simple than it sounds ....
It might work
Try vaporising Mercury with high voltage passing through it, and it contained in a vacuum vessel. Then try to manipulate the vaporized Mercury with certain frequency sounds. I think you might be able to manipulate its own weight, possibly creating a negative weight. As well as its own magnetic field which can interact with the earth's magnetic field making it a massive potential of a projectile to outer space. Wow that sounds real far out and cosmic.
the magnetic field IS the dielectric field. every magnetic field is powered by an dielectric dynamo. i would suggest reading steinmetz, this is impossible to understand without understanding the idea of counter space aka the aether.
It has nothing to do with gravity. Just an amplified ionic wind thruster. Alexey Chakarkov is genius.
if there is arcing from the top plate to the center disc that spins you should have a flow of air due to ion transfer.
if the disc is spinning you should be noticing a bit of the coanda affect, where air flow coming down and out around a spinning cone/hemisphere generates a small amount of lift due to a positive pressure below the spinning part and a negative pressure above the spinning part... this leads one to believe the faster the spin the greater the coanda affect.
from my understanding you need an oscillation, in a spinning magnetic field, in order to confuse or insulate the attraction of masses such as the positive nuclei of the craft from the negative electrons of the earth, and the positive nuclei of the earth from the negative electrons of the craft. soo in essence a thick or thin wall of electrons in a cloud dens enough that the vessel cannot see past the cloud in order to se the positives of the planet.
The amount so small that it won't even blow over paper.
3 pound maybe need is a Jairo scope
On your ion thrusters, you need to encapsulate the thruster, in air tight capsule, and pressurize. Extend lower ribbons, through capsule. Keep air tight. Play with pressure, and voltage, for stronger electrostatic propulsion. Play with sphere design, in place of ribbons. Also, play with different internal gasses. NOW, you’ll start understanding UFO’s😉🫥
It kind of reminds me of a subwoofer. I have wondered, would a subwoofer travel in space, i know we can't hear anything it makes.
But wouldn't the vacuum have enough tiny energy to buld up over time. I picture the subwoofer moving its instead of moving air on earth. Because its own mass would be free from earths gravitational pull.
Basically a nuclear subwoofer is what i think could be a saucer, with a material for the cone that can bend and warp, but always go back to its original strength and shape.
Lile the foil that was found in NM back in the day. It would make a great cone.
Groovy work. Super layman explanation of juicy technical stuff.
I'd love to see you build a plasma toroid generator and explain the build.
Subbed as once you see it i'm sure you'll stick it on your to do list, it's real pretty. :)
Thank you.
It's supposed to be repelled against earth's negative charge, so the output of your device should be negative "ion wind".
Uhhh, yall know this ain’t flying right?
I don't think it works that way. Earth's field is negative on the ground and positive in the ozone layer. ( corona motor ) Repulsion would not be a good way to go. You have to break from gravity before you add any type of movement.
At least your trying man this is the holy grail!
thank you
The blue corona between the plates is mesmerizing!
If I had a better camera it would have been 100x better. In person it was just like the picture I took.
@@nathanbunten4299 I bet! There is something satisfying about ripping electrons off the surrounding air only for them to return emitting blue photons. Plasma is so cool!
You cover all thing,first I thought I had some ideas and you don't know about,but already figured out,still I have two ideas left😅
First, use a battery for the power source because it is not connected to the ground
Second, make the voltage increasing circuits yourself so that you can reduce the intensity of the output current and only increase the voltage
I already did. Thank you.
Very interesting 😊
Have you seen victor shawburgers waterjet version of this ,he uses water to spin at 3000 rpm it runs itself,kinda like a jet turbine but with water jets
yes I have
Think about what Aleksy can get his hands on in Russia. That was a washer machine controller and a fan dimmer.
I have the pictures and schematics of all of his devices now. I will be building them to spec soon.
Pulsing is the key and very few people know that. Back in the 90s on Yahoo groups there was a very active lifter community building these things and the biggest breakthroughs for extra power speed and other things was pulsing the electrostatic charge to the lifters and even reusing the charge by timing it so that when the charger was made the next pulse would pull the same charge.
The first self flying lifter was made during that time by a guy I forget his name is sort of a funny name like soldier or something and he was from I think South America is it might have been savior his name might have been savior but he pulls his high voltage and he was able to power a lifter with an onboard battery because he was pulsing the power. And now we have much better batteries we have very small lithium disc batteries for watches and things which I would imagine could much more easily power a self-rising lifter today.
Have you tried weighing it while it is running?
I wonder why not?
what will happen if you put even larger third plate on top?
He is so close. 🎉
You realise this is based on Louis Rota's work?
The top and bottom plates should be negative and larger, the centre plate smaller and positive. He also used electromagnets to create the field enclosure. It's called an aero-balistique.
I will look up the name. Thank you
I would say you need use brushless motors that have three wires cuz they say brushless dc but the driver is converting the power to ac I believe my RC is 3 phase Ac
Dang bro your smart as hell ty for the video I didn’t know that’s how that all works
There is a lot more that I have learned. It is so much more complicated than I thought.
Interesting but I had to ask, did you ever try the counter rotation where the magnets between both plates are in repulsion and in the closest possble range? My understanding is that this is the configuration where certain unusual phenomenon actually begin.
Thanks,
Carl
@@prometheus1111111 Yes I did. It makes it have cogging. The magnets have a strong field that stops normal operation even with a strong motor. The effect is counter productive.
And he also mentioned that the aluminum flywheel must have dents all over the bottom like a beetle wings
😇⚜️😇🦅✝️-Microwave Magnetron design resonating cavity structure for the center plate!👍
Yes indeed!
Wow. Great presentation here. I'm still not sure why the alluminum foil sucked down on the wood when you applied the one wire voltage. Would like to hear you expand on that in another vid.
On a side note, I'd be scared to get near those spinning magnets without some sort of blast shield. Stay safe and again great work.
Just saw this recent news that had me searching some TT Brown info. Not sure if it will prove to be real or not yet.
"Dr. Charles Buhler, a NASA engineer and the co-founder of Exodus Propulsion Technologies, has revealed that his company’s propellantless propulsion drive, which appears to defy the known laws of physics, has produced enough thrust to counteract Earth’s gravity."
the foil polarizes. So like a magnetic, it charges the field and just pulls charges to it.
really glad i found your channel, a proper mental brain/mind work out... its almost like keep fit channel but for the brain.
Wow - that was really informative!
Quick question: You said your middle plate was 2 alu-plates hammered together, with the edges folded+joined together.
I missed the part of why you hammered them together - I realize you want them to act as a capacitor and resonator, but the hammer-bumps would create various cavity sizes between the plates, creating lots of different capacities values (as I see/understand it).
Would a carbon felt/foam in-between the plates, perhaps with a teflon insulator with holes and/or screws at various points to create a 'circuit', be a 'better' way of making either a uniform, or 'bigger cap on top than on bottom' - and not a directly shorted alu-alu - connection/capacitor, instead of what I would imagine is a lot of random points, that when rotated is not uniform - as it is hard to scrape bumps?
Your explanation of how this works made me think of jumping on a trampoline. Boing-boing, you get resonance going.
Then I bring a feather-umbrella with me, holding it above my head. The feathers allow me to go up easily, but resists me going down by blocking - as feathers do. This alone would make resonance hard, as I would land softly on the trampoline - but if I attach strings/springs to the feather-umbrella's sides and to the sides of the trampoline, hitting the right resonances - I should jump myself higher and higher by jumping up, stay 'there' - but the string/spring to the trampoline pulls the trampoline towards my feet, and I can jump as I normally do - and getting higher and higher off the ground.
Looking forward to seeing your new Graviflyer
Yes, like the trampoline. I think of it a a bubble. Soap does not lift but when you make it into a bubble it does. The forces around it are not held at bay while the hot air lifts it. It has a very low lift factor. It's the fact that it removed the resistance that is the important part.
I tried to follow as much as I could to the original design. Alexey said it works. So my job is to try everything to see if he is right. The textured plates are because Alexey used them.
I decided to change some more stuff on version 3 because of some of the facts you bring up. To be honest When I get the center plate to resonate then it will make the whole craft resonate. It's all aluminum. I like the holes in the plate. However only to make it like a beetle shell.
@@nathanbunten4299 Thanks, makes sense to replicate/repeat what Alexey says works.
I don't know how much Earth's magnetic field-lines influences the craft, if at all, but I know the field-lines vary wildly. At the poles they go straight up/down, then they move towards horizontal near equator. @brainiac75 did a video called "Vertical? The Earth's Magnetic Field?!?!"
Getting the center plate to resonate - will be the replacement for the poor person jumping on the trampoline, holding the (rather huge, compared to the person) feather-umbrella, getting an extremely good workout :ø)
Ever tried carrying an aluminium ladder, where your 'buddy' suddenly drops it - the kick, ooh ouch the kick, when it hits the ground - and the shock is transferred to your tight holding hands.. A practical jumping feather-thingy sounds well.. impractical
Btw, graphite pads (used for CPU cooling) and pyrolitic graphite (exhibits 'anti-gravity' effect due to its strong Diamagnetic value when placed over 4 magnets) could also be an interesting option to look into. Some forms of carbon conducts electricity easier in one direction, if in sheets rather than a bonded matrix/crystal-structure - some forms of carbon costs a fortune, others can be made by burning/carbonizing cotton.
@@EgonSorensen I like granite as a dielectric. The k value is high. The other reason is we can get a secondary effect. The force of a capacitor will cause the quartz to make cold light. The better part is water is conductive and the granite is like a candle wick. It pulls water in and the granite holds it. It might give you more than you put it. I understand the ones you like but tests with voltage will be needed to see if they can stop very high volts from tearing holes in them.
@@nathanbunten4299 'I like granite as a dielectric'. Sorry, but I don't follow you here.
I presume you're now talking about the ultrasonic resonator used in the original design in the beginning of this video?
I was under the impression the piezoelectric device was sitting at the very top, in the hat which looks like the back end of a light bulb-parabola.
Granite as far as I know contains A LOT of quartz, which is used in a piezoelectric - I'm sure you know, and I speculate that since granite contains various structure sizes, it might be tunable over a larger frequency range than a specific quartz crystal/element.
Perhaps a crystal/quartz gemstone (those 6-sided for sale in souvenir shops, etc) ground down with to an angle, scraped/cut across the angle cut, so it would act as an xylophone of sorts making tuning 'easier and cleaner'?
Perhaps a head-cap around the tip of the granite would help prevent it destroyed from arches. I bit of molten aluminium is easy to pour around and would make a great fitting protective cap around the granite impactor tip. The alu-tip then acts as a mechanical and electrical shield around the fragile granite-tip, causing arches to run on the outside, flashing over far away from the tip and mechanical shocks to be distributed more evenly on the entire granite tip area.
If I'm wrong on topic or otherwise, do let me know. as I said - I lost you on this message. There's a lot going on, me brainstorming without knowing your entire setup/situation.
- I hope to see this thing built and flying as soon as possible too :ø)
@@EgonSorensen You don't need to know the frequency of the quartz. Just that when it is struck it makes piezo electricity. In between 2 plates you get a sudden pinching effect. that single effect will activate the quartz. There is one problem. You have to get the power out and not just make the quartz glow. You cannot just attach a wire to it. Putting it in water solves that. The granite works like a sponge to water. It holds it in.
Take a pyramid of granite. put a small plate on top. Then a big plate on bottom. put the bottom plate in water and make sure the granite is touching the water. Then hit the power. It should light up and give you a higher amount of energy. That's the theory.
Another thing you could use silver for the best performance.
Remember drop your magnet down a copper tube or ss put a ring magnet on the outside the inner magnet should stop at the ring magnet.
What would be the result of a gold or titanium’s coating instead of an aluminium one just curiuos😀
I have no idea
Or look at other metals not widely used .
Whoever is pulling the string the graviflyer is hanging from should be coached on how magnets work. It looked more like how a child would imagine a ufo flying in a cartoon. Or a marionette puppeteer simulating walking.
Ssshh, you’ll give the game away! 😢 seriously though, I only watch these things occasionally, just to see if the old duffers are still trying to persuade these gullible fools with their silly tricks. Guess they are!
yeah, age ol' trolling...still works, lol. Reminds me of this time I saw a video of someone wrapping a cat5e cable around a cell phone to get "free wifi". I tried 4 different cell phones and 3 different cables, but nothing worked. I know I could've eventually found the right configuration, but the illuminati prevented it.@@simontillson482
ファルコン9ロケットの次世代機ですね、宇宙空間が近くなることを期待します❤
question ? why not get rid of the spinning portion and permanent magnets . replace the Magnets with small electro pulsed magnets rotating the Magnets Fields using Micro wave Frequencies. Opinion
Because the voltage needs to make a cloud. It forms into a sphere around the disc's that rotate. Without rotation the clouds won't form.
@@nathanbunten4299any one who can speed the process of doing away with are means of transportation and Flight . it would be nice to watch a Plain fly by and not hear the NOISE OVER HEAD . the TECH is out their just being kept from US .
Test Nicola Tesla blue print of antigravity space ship 🛸, windings in specific pattern of hull itself, with liquid mercury. Have you seen the blue print and written of why what where of how works?
Have you tried to put a SEG on the middle disc?
not yet.
Super!
Man keep on going!!!
Thank you
37:36 pyrit also make the same mirroring effect of discharge however quartz crystal it self won't solve your issue, i liked the discharge of aluminium foil, it's cool effect but you can have huge plate with monocrystals which can be harnessing the wave functions but it would have to be from one side for both to have that discbarge actually flow, so it would make sence to put two monocrystal cylinders above those aluminum foiled cylinders but i don't reall see that working without vacuum, plazma charge can build up when electrolysis from other material on to the other creates more electron shells which can increase the flow of ionic winds in the end, you want this effect but in toroidal spin up and nonpolar spin down if you ever calculated molecular bond electron negativity (polar, non-polar) you know what im talking about, it's possible to create plazma in non vacuum environment
I want the state just before plasma. The build up of charges around the disc's. if i can charge the whole frame with the center plate then i can palse it. The charges my be the thing that makes it seperate from gravity.
i believe the magnets have to sit in the disc.. put holes in it , thats the weight ratio from the magnets ( = , --I I-- ) ⚠️
Alexey used a special amorphous version of a nickel alloy like the driver of a Golf Club is made it’s made out of amorphous Nickel because you can maximize the amount of impulse on the driver transmitting as much force as possible on the Golfball…amorphous nickel means it was molten and cooled off this rapidly in seconds , so no usual Metal Crystalization in a Kubic form like we have in all metals on earth that cool off slowly …you do not want that in a gravi-flyer - you want to minimize metal grids inside materials and maximize Amorphous Metals this way the earth gravity field which connects with naturally slowly cooled off metal cubic grids …in an Amorphous Metal the amount of gravity mass and inertia mass can be different in high voltage fields …this way gravity can be altered