Holey Goat's "Unbuildable" Bullet Proof Turbo 400 Tear Down!! Everyone Needs a Tony!
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Me and Zeppy were on a Holey mission to acquire the original transmission to the famous 1970 Pontiac GTO known as The Holey Goat. We're out to prove the impossible is possible. Dalton and JD, @PoleBarnGarage , entrusted us with this relic from under the Texas Mopar Warzone Target. Where it sat for something like 2 billion years in the earth. He was told it couldn't be saved. Well, we both want a 2nd opinion!!Me and my ole friend Tony (mostly him) give it our best shot!!! Enjoy!!!
#cars #diy #pontiac #holeygoat #youtube #IOG #polebarngarage #gto #transmission #nonamenationals
@PoleBarnGarage @outsidethebarn
@RoadkillCustoms
That dude Tony is legit as it gets. That's a guy who knows his craft inside and out, you can tell just by the way he talks. Absolute badass
He don't mess around. Believe it or not he repeatedly said "he's seen worse" lol.
@@IrishOutlawGarage dudes obviously a badass. Known a few like him over the years, they're gone now.
Hello Guys From Mark In Kentucky. I only recently discovered both of your TH-cam channels and watched this video with great interest. I have a 90 Ford F-150 with a 4.9 liter Inline 6 or 300 as I have always called those engines. This truck has a E4OD transmission that has been giving me problems in which I have chosen to drive until it quits pulling rather than fool with the local transmission shop who made it pretty much clear that they don’t like Fords.
I was kind of curious if any of you had any bad or good experience with any of the transmission vendors from off of eBay. Im looking forward to seeing the progress with the 4wd that you guys pulled the transmission out of being that I used to run square body Chevrolet trucks and still have my wrecked 79 Chevrolet 2wd 3/4 ton truck that had a 350 4 bolt main engine with a Turbo 400 transmission.
I wanted to let both of you know that I have subscribed to both of your TH-cam channels and that I retired from a state government equipment repair facility as a welder/fabricator and can’t move out of a garage setting (LOL).
@@TheIronDuke502 I personally have never bought a major component like a transmission from Ebay. But that's not to say it wouldn't be fine. Would have a good warranty I'm sure. Just read all the reviews and choose the best one 👍
@@TheIronDuke502 monster transmission has bone stock builds for less than I've ever paid for a rebuild. Comes with good warranty to.
If there's one lesson I've learned in life, it's that it always pays to know a guy named Tony.
That cradle the transmission is in is pretty neat.
2nd Opinion For The WIN! The Hot Rod Gods are pleased.
I love to see old school mechanics at work rock on man .
Hey Irish, watching now.
I always liked a Turbo 400.
Who ever started tearing the transmission down stopped because they did not know how to tear it down.
Did not know about the center bolt.
Nice of your friend to help out.
He knows his business.
The transmission is a good core, that's great.
Thanks for sharing..
Take care, Ed.
Actually Ed, the guy just didn't wanna work. Which means he only wants newer stuff that take minimal effort.
@@IrishOutlawGarage Yeah, that's what it sounds like to me.
Did he LITERALLY dump the tranny in the trash?!
I really hope he got a talking-to for that.
@@iFixJunk just set it by the scrap pile apparently.
Pole barn garage sent me over hey
Hey 👋 Jay .
New subscriber from PBG
Mr. Dalton sent us over for the ,
Holy goat TH400 rebuilt & diagnostics
Gotta thank Tony for his expertise
on this rebuilt
I don't mind the awkward camera
angles Jay .
I'll respect Tony's privacy .
This was a great 👍 video of that teardown .
That transmission is literally ,
Bullet proof !!
I'm looking forward to your 304 AMC javelin build 😀
First time here, guess I found another hidden gem on TH-cam, thanks for helping JD and Dalton.
Welcome aboard!
Great work, Fellas- That Goat is one step closer to Concours condition- look out pebble beach!!
BRAVO & BEERS 🍻
It was funny watching Tony bumble around like he was lost and didn’t know what to do next.
What do you mean
@@IrishOutlawGarage I mean it seems like he could break that trans down in his sleep blind drunk behind his back and upside down.
@@Mrhalligan39 He knows 25 ways to get that 1 piece out. And its every piece.
Its good to know somebody still cares about the 1970s stuff
No where feels more like home than the old school garages. Where a lifetime of work has been done. With the remains of it all about.
You did a good job by taking it to Tony!! Your a good guy and glad you got your kid helping
Great video 👍I am 65 and remember watching mechanics tear these down and rebuild them at my dads Auto Parts/Transmission business NEVER saw one that dirty
New subscriber from PBG. There's not many people like you and Tony left. Takes a good heart to help others.
If I didn't use any of skills in music or mechanics to just be helpful in some way my parents would strike me with lightning lol.
Hell yeas that TH400 is a great transmission!! And congrats on the success of the video, way to go!!!
Nice save, you can't kill 400s. Gotta get me one of them trans rotisseries! Good video, man.
It's good to see people sharing skills and helping each other... Keep up the great work...
Second opinions always are a good thing. Hope to see you onPower Tour this year and again down at the No Name Nationals
I’m new to the channel. Watched you Dalton workin on the silver dollar Chevy. Ive been fascinated with all things HOLY GOAT. This is cool. Thanks , I’ll be tuning in.
Years and years of that Texas dust
Great video ! Looks like it will be a successful rebuild ! Take care ! Nice work by Zep filming !
And that's why I have enlisted the help of a guy who knows what's up with engine building to help me out with the stuff that I don't know! Good stuff Jay!
A good transmission guy is worth his weight in gold ten fold!!!
The way you said 'concrete' in the PBG video had me rollin'n'laughing 🤣
Great video I enjoyed it all.
That there is the difference between can't be done, and can't be bothered.
PBG sent me.
I just realized you say BOP...
Damn, that takes me back.
Welcome to my misery lol!
That’s awesome Brother! He reminds me of my Pops. My Pops was a transmission man for years. I need to learn something from him for sure.
This is my first vid of yours and im hooked great job cant wait to binge watch your vids. Its amazing what you can learn on youtube these days you guys makes learning mechanics fun.
I thnk Dalton for turning me on to your channel... I thank Kevin for turning me on to Dalton's Channel... It just keeps going. LOL
Jay I love you and Dalton Try not to miss either one of you. and as I said on PBG earlier you and him need to work togather as much as possible make for a great show.
great he was able to fix it good watch!
Came here on PBG recommendation. Staying for the great vids 👍
Appreciate it!
These are the videos I like to watch. It brings back a lot of memories helping my step dad, and grandpa putting engines in old trucks. I learned a lot from them. The new vehicles are boring. I subscribed almost immediately!
Thankyou! Yeah I just love to wrench on old garbage.
This was a great video. It didn't even look like the other shop tried to look at it
Basically stole the pump and left it for dead.
PBG sure appreciated your help
Another first time watching your video's your buddy Dalton recommended your channel.
Thanks for comin over!
Hey man, this was my first time watching and very interesting, been subbed to Pole barn for a while but anyway I really enjoyed your show and will be tuned in again 👍👍👍👍👍✅✅✅✅✅
Thanks!
Irish, somehow let "Tony" know that people watching appreciate folks like him for helping folks like us, He is a hell of a guy to take on that trans and help bring it back to life, the teaming of the 2 channels is also pretty damn cool to see!
goats going to need wings when you get done
Looked pretty dang good once it was all taken down 👌
I just saw you on Pole Barn Garage and you guys did a great job on the truck so i had to come check out your channel and I just subscribed to your channel and can;t wait to see what you work on next.
Thanks!
My 1st time watching ! I subscribed & gonna start watching the past videos 👍🏻
Welcome, I promise they'll get better 🤣
The pipe wrench is the missing piece of every garage who didn’t have a plumber father.
I actually have 4 different sizes lol
i think that shop pole barn went to probably don't like to mess with old stuff they probably only work on these newer electronic trannys but any older guy like me knows how good a turbo 400 is. Glad tony's going to fix it up
Subscribed
And il enjoy following 😁
That tombstone welder took me back to the 70's in my shop class.
The hookah reminded me of four finger bags for $30, so I heard.
The edit was to clean up spelling.
🤣
PBG sent me! subbed and all. great vid man
Thanks!
as I remember, the Holey Goat had been in a flood, while that trans was still in it.
Probably a couple floods actually lol
Pole barn sent me 👍
Amazing that there’s no bullet holes in the case 🤯
Good work tony
Keep grinding
Tony knows his stuff.
Me? I'd be scratching my head, holding every last little part up to the light for a better look, dropping things while doing it, and wondering when I was done how it all went back together.
I'd also have to start with a totally empty workbench or I'd be trying to add things to the tranny that didn't come FROM the tranny.
Not to mention I'd be taking FOREVER as I went to retrieve each tool, sometimes coming back with something that doesn't work...
Not Tony's first redoe for sure👍
Nope, not even close lol
Just watched you help Dalton put the transmission In that Silver Dollar Chevy truck.Then went over and watched your video on trans tear down.very good
It was definitely nasty inside, nobody will argue that, but it's totally rebuildable as long as the case is good, and it appears that the case is just fine. Clean out the case really good, replace a fair amount of what goes inside it, then rebuild it and put it back where it belongs in the holey goat.
It's already done
Love your show dude
Cool video. Good job filming, Zeppelin!
Tony is the master welldone that's great to see
Glad I. Found you thru daltons video I’m subscribed
Thanks!
That older generation gets it done.
Nice video
Great video
I need to know this Guys playlist playing in the background it rocks!
70s and 80s!!
Good news man good job
I know a guy……better friend than we never know. This is miraculous what he does here.
🎉 I meant show him a picture
Can't remember if I showed him or not.
Nice video! Just subscribed from PBG. Here from Minnesota where this morning it was -4°. I got a heated garage to work on my stuff. Luckily.
I can do motors and such in my shop. All my cars are outside though.
@Irish Outlaw Garage I got my mustang and one truck inside. And one truck and one car outside. I'm in a city lot. So not much room outside
followed here from pole barn garage. Saw Tony and some of your other videos and realized your local, if you ever need a hand with something let me know
You in my area?
@@IrishOutlawGarage live in newton and work in Effingham i actually believe i saw blanche at o'riellys one day a while back
I have the identical transmission laying on the floor
I had a 1974 Chevy Spirit of America Impala back in the mid 1980's. My Dad and I dropped a 1972 Oldsmobile 455 engine 400 turbo trans 3:73 rearend in it ..That Ole Car would Run ..That ole Tranny took a beating and kept a going
You should have sold Tony a picture of the goat before you started
Were was that car run in the dust bowl. That trans pan & valve body looked like a clay bake. Amazing you guys got that rebuilt, good to see. Just found your channel. Hugh Mc. Chicago metro.
This old boy should be teaching a class somewhere
He's taught many people.
I want to know a guy like Tony but just to talk and coach me through doing that. I want to do the work but have someone to tell me what I’m doing
One things for sure. Don't fu*k with Tony. 😐 he doest want any bullsh*t
I was curious if the tranny was fried or could it have ran with a new filter and fluid,? Fun video. You and Dalton do work good together. Ty
It was locked up solid
That trans guy is probably thinking in his head, shut up! Lol
how can u throw someone elses trans in a scrap pile even if u think its junk
Agree, at least hand all the parts back.
Just subbed to pole barn, now subbed to you sir!
Awesome!!
That didn't look bad at all!
No where feels more like home than the old school garages. Where a lifetime of work has been done. With the remains of it all about.