2020 Gravely Pro-Stance 32 Full Review
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- In this video I will walk you through the features and benefits of the 2020 Gravely Pro-Stance 32. We'll cut short grass, tall grass, test hillside stability, as well as do a complete walk around of the entire machine. There are so many great features on this machine, but there are a some that should be improved.
Like what your watching? Subscribe for more!
Just can't get enough of JC's Lawn Tips?
Follow me on Instagram where I post lots of pictures and videos reguarly!
/ jcslawntips
![Gravely ProStance VS Wright Stander X ! [Mower Comparison]](http://i.ytimg.com/vi/0_9BW4M1HO8/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
Thank you for a awesome review on the Gravely 36inch . I will be purchasing one very soon.
Great review. Gravely is defs ahead of the curve with that deck pedal. Cannot believe every stand on manufacturer does not incorporate this.
Spartan does!
Just ordered one. You guys got a catcher for it?
@@greenslawngarden7809 yes sure do.
@@CatchProAustralia Hi mate stander b vs gravely for catching? And overall for Aussie lawns. Thanks
Great video! The standing platform is way too bulky and very hard to use that pin, you’re spot on with that...also, the beginner bar setting is absolutely pointless 😂
Very well though out mower love it push mowing is phicicaly draining in the heat very good for small back yards with narrow gates ,I’m going to buy one eventually, well done gravely
Thanks for your video. I have one of this and happy with it so far
It’s all about the gates.
Great 👍 review wish you could
Do one on it mulching leaves!!!!
Stand-on manufacturers should add a hydraulic deck lift with a little pedal on the platform, I've run some Kubota zero turns with that system and it was sweet as
Great video
Great walk through. Keep up the good work! New subscriber here.
Thank you, I appreciate it!
How much you get
Jared! Great video. Lots of good info. I with you on that foot pedal. I took out a residential gate with darn pedal. Other than that, this is my favorite machine. -Craig
Switch the foot pedal from the right side of the lever to the left side. Appears to be a simple bolt. 4:49
Really great review......
Love it... great review.. thank you.. 😎👍
Good review. I bought on in the spring and sold it within 5 hours. I have other older Gravley mowers for 6 years. I was disappointed in the 32”.
Great review.
Thanks for the comment, what was the main reason for selling? Just curious
Well lack of tie downs in the BACK of the machine is one thing. If make a 32” machine then make it 32” with the deflector up. I always like the removable so it doesn’t make the machine wider. Platform locking pin is dumb. We flipped the foot lever to the inside so it would stay 32” but wish it would lock out of the way. Top of the tower layout is not the normal user friendly like the older models. (Reminds me of the Scag). Bring back the trash bin and put all PTO, key, throttle, choke back above the throttle controls. Gas gauge sight hole is dumb. Rear tires are to narrow for hills and turning without grass skids. Love Gravley over all, but if they would address my dislikes I’d buy anther one to go with the other 5 mowers 48” & 36”
Well done 👏
I have this mower purchased it the
1st release day cost me $8,200 i
Put $4,500 down finance the rest
Through Sheffield....
PROS;
Can climb hills 😊
Fits through 98 of my gates 😊
Fast as hell😊
Easy control 😊
Wonderful stand on platform😊
Cons;
Doesn't cut low Worth a damn
So low accounts are out!!!🤬
Will not mulch leaves or debris
due to the deck doe's not go low
😡😡😡
Mines have mulch blades as
A mulch kit and a quick clutch
Still will not mulch a thing due
to the deck is at a tilt will not cut
Low...
The very 1st cut was Wonderful
The deck belt broke at end of cut
The dealership re-adjust it and
My mower never cut low again I
have taken it back 3 times to be
told the deck is adjusted correctly
In fairness to Gravely my deck sat
Flush with out tilt when I 1st got it
The dealership in Memphis Tn
Said the deck belt broke due to
It needs the tilted pitch on this
Video their deck is straight the
Way mine's once was but not
Anymore so if the dealership has
the deck currently correct this
Machine is flawed it can not cut
low at all only high as mid range
Cuts.....
It ruts very easily but I expected
That in honesty on slim tires to
reduce it I step off mines when
Turning to reduce weight and use
It like a walk 🚶♂️ behind....
It can hold climb a hill but not cut
Will slide it a 32inch stand on with
Slim tires I did expect that...
It doe's climb a hill to get to the
Top of a flat surface if it is there
But won't hold one cuting from a
Side angle....
The locking pin to adjust the deck
Is hell the foot assist helps big time
In lifting the deck ...
My only major gripe is the machine
Can not cut low or mulch at all!!!
In fairness this one is so is it my
Dealership in Memphis Tn can
Not properly adjust the deck
Or is this Machine flawed?
The one cut before the deck
Belt was great but after the
Dealership re-adjust it bye-
Bye to everyone cuting low
again !
This Machine is worth $6,500
In my opinion not the $8,200 I
Paid in my opinion if I could do
It over again I would purchase a
Hustler 36inch stand on a Farris
A scag Xmark...
But it being 32inch getting in
Small gates sold me if only
Mines could cut as low as your
Video does i would be happy
With the purchase!
This is the exact reason why I'm looking at the Wright Intensity or JD 636m!
@@NewVisionLCS I have the same problem when I first purchase my mower, but yes you can cut low, you have to do a little work by changing the pin on the deck to low position, the deck comes high to cut from factory, but everything is possible, or call your nearest mower dealer they can adjusted for around $75 dollars so you can cut low, hope this help.
@@mrperfecto2758 👍🏼
@mrperfecto2758 does the adjusted lower level have to be real level lawn, so not to scalp cutting grass as short as a push mower? As I don't think it has a floating deck.
What about going up the hill slower as a walk behind, as this machine allows it.
It appears you can just unbolt the foot pedal and bolt it back in with the pedal on the left side of the lever instead of the right side. That would let the pedal be inside the "32 inch" foot print. Referring to 4:49
Yes you can however then the platform will not latch up in place
I'm looking at a '21 with 70 hrs for $5500. Worth it still?
I think that’s a good price in today’s market a new one is probably pushing close to $8,000 if I had to guess. Maybe they’ll negotiate and you can get it for $5,000. You never know
What happens when you decide to use the grass catcher, do you still need to carry wrenches to unbolt the grass deflector in order to use the basket like the previous pro-stance models? That was so annoying!!!
I understand the fit and function, but part of me is saying, if the gate doesn't fit a 36", is it worth the headache?
I hear that and agree from my business perspective. There are some places down south where all the neighborhoods have 34 inch gates or smaller. This covers the market and gives people more sizes to choose from
@@jcslawntips I agree. I'm in Georgia, and alot of the homes have decent size backyards with tiny gates!
Why did y’all go with the 32? That seems really small for those big fields
Grate video but is that a floating deck?
yes it is
How wide is it? I know it says 32" cut but exmark has a 32" but it actually measures over 45", kinda defeats the purpose when most small gates are less than 45"
Do the tires leave ruts in lawns being that there smaller
They can if you follow the same pattern regularly
Why do you wear ear protection when cutting?
So I can still hear when I am older
What is the total width size
I would cut off the foot pedal if I bought that or flip it if possible. Also take off the chute blocker, maybe add a nice leather one. If a 32in doesn't fit in the gate there is no point.
You can flip it but then the platform won't latch. But I hear you on that
On a hill that steep step off the
Stand on walk it like a walk 🚶♂️ behind
You can, but depending on the terrain the machine would loose traction because the operators weight is not on the platform
I agree 👍I was thinking
Of just riding to the top vs
Cuting
No No No, please Gravely bring me back my previous model, this is a total mistake, I love my mower.
Hey
I hope pro stance better then their zero turns, i wasted my money on them. Horrible cut quality, deck height adjustment about 3” off, even adusted all the way up it still wont do 5”. Breaking springs, belt alignment horrible, discharge is a joke
Man sorry to hear that. I've had my pro stance 52 for a few years and its been great 700 hours and only had to replace one small part
@@jcslawntips 6/7/21, Why would you want this over a [pro-turn] or other commercial-grade w/a seat? I just got a new consumer-grade ztx42...just right 4my property.
Sharpen your blades every week
Mine are sharpened weekly , even tried about 5 different sets of blades
Now its parked, i switched to scag. Best thing i ever did
Only gravely would pull some crap like that on the pedal. Just like the older version burning the flap. What a joke.