From someone who has worked with this controller for a long time make sure that the JST connection is well sealed up and protected and cannot flex in any way when its installed. Almost all BAC855 failures occur due to water ingress in this area shorting out one of the feeds. Good luck :)
This is exactly what I've been looking for! I'm excited to see the version with the light support because we really need that for commuting/ riding in NYC. Is there an ETA for the release or is it still under development?
does it cover peddle assist ? i actually do peddle. i don't think the happy run g60 has a proprietary system . there is no app . I have headlight and turn indicators but i called tech support and asked for output voltage to headlight as i was changing it they said no problem it is 48v output.
question are you offering the purchasers the abilty to program the controllers to their own liking or are you locking it down with specific firmware versions that they can only get through you ,we just need to be honest and upfront nowdays more than ever
Still looking for a video that shows if the pedal assist still works same as stock controller with this controller I want pedal assist still. in all 3 modes .
1. The motor's limit is based on amps over time - we are sending a peak of over 50A at once, with normal operation at around 30A. 2. Torque sensor isn't set up but can be in the future. Are you in EU?
@@handlworks based in Europe yes, I was the one who told you about the Mini Wheels shop in Paris. I have a torque sensor on my RX compared to cadence in the US
@@aeskellion Aha! So hard to track people through different socials. Yes, torque sensor can be set up easily and Mini Wheels will be able to help out with distribution!
“It will always start in Mode 1, which is a US Class 2 (20mph top speed, 750W output). This is a legal requirement. You can use the (+) button to cycle through to Mode 2 (US Class 3, 28mph top speed, 1200W output), and Mode 3 (private use, unlimited, 36mph top speed, 2500W output).” - handlworks email support
Excuse my ignorance, but do you need to change the mode in the Super73 app since it starts it in Mode 2 when you power on the bike? Maybe I missed that part. 🤭
No more Super73 app, this replaces the stock controller! It'll start in Mode 1 (Class 1 ebike), and you can toggle ride modes with the arrow keys on the display.
The controller is IP rated for dust and waterproofing, as is the display. Since ebike connectors have varying levels of ingress protection, we recommend protecting all connectors if riding in very wet conditions.
Took me quite a while to realize that by 'compatible with your stock bike' means 'compatible only with Super73 ebikes'. Maybe this should be said or even be the part of the video title...As a BBs02 owner, I did not find this video useful for me.
this controller is an absolute ripoff except its small so you can hide it places in the bike, otherwise anyone can grab a $80 50a kt controller and get the same performance.
From someone who has worked with this controller for a long time make sure that the JST connection is well sealed up and protected and cannot flex in any way when its installed. Almost all BAC855 failures occur due to water ingress in this area shorting out one of the feeds. Good luck :)
Thanks much and totally agree, it's on the way 🤠 much appreciated 🙏
No as Good as yours...hihihihihi😅
This might be exactly what I've been looking for! Def need one!
It for sure is 🤘
Hope you will soon ship to europe!! The fact that it can be upgraded is mind blowin"
Thank you much! Working on shipping to Europe 👍
@@handlworks Muchas gracias. 🙂
I’m so exited for this!! 🎉
We're excited as well!
This is exactly what I've been looking for! I'm excited to see the version with the light support because we really need that for commuting/ riding in NYC. Is there an ETA for the release or is it still under development?
We'll be announcing a go-live date in the next few weeks, should be shipping sometime in end-Sept or Oct! Definitely top priority!
@@handlworks I’ll keep an eye out for, thanks for the info!
Can this setup be used on the zooz e bikes..? Also do you ship to the uk..? Thanks…..
I should do this with my ariel rider xclass 52. Fried the controller.
Why is mode 3 limited to 35mph ?
does it cover peddle assist ? i actually do peddle. i don't think the happy run g60 has a proprietary system . there is no app . I have headlight and turn indicators but i called tech support and asked for output voltage to headlight as i was changing it they said no problem it is 48v output.
Can this work for other bikes like samebike engwe etc
i have a dual battery (ChiBattery) set up on my S2 would that effect this upgrade kit?
A dual battery setup just needs a firmware upgrade (instructions provided, and free). It'll work much better with a dual battery!
S73's with lights all have a separate buck converter. You could pull this off the ASI with another higo connector...
That's more or less what is in development. We're adding logic to turn on the lights via display as well.
question are you offering the purchasers the abilty to program the controllers to their own liking or are you locking it down with specific firmware versions that they can only get through you ,we just need to be honest and upfront nowdays more than ever
Still looking for a video that shows if the pedal assist still works same as stock controller with this controller I want pedal assist still. in all 3 modes .
Pedal assist works 👍
Would this work on my eahora pro dual motor 52v?
2 questions :
1 - how much amps can the motor take safely?
2 - I have a torque sensor, not a cadence sensor. Will it work ?
1. The motor's limit is based on amps over time - we are sending a peak of over 50A at once, with normal operation at around 30A.
2. Torque sensor isn't set up but can be in the future. Are you in EU?
@@handlworks based in Europe yes, I was the one who told you about the Mini Wheels shop in Paris. I have a torque sensor on my RX compared to cadence in the US
@@aeskellion Aha! So hard to track people through different socials. Yes, torque sensor can be set up easily and Mini Wheels will be able to help out with distribution!
@@handlworks i see. Very exciting news, looking forward to the torque sensor compatibility 🙏🏾
Would love this on my 52v dual battery 40Ah Revv1
Will you be working on support for turn signals in the new version?
Yes!
Thanks for the reply! I am sold!!!@@handlworks
@@tannerdler9676 thanks much, keep a lookout for an update soon! Next few weeks.
you can also add your own. easy to add a splitter cable to a 12v regulator from your battery.
Can users modify the modes so I can turn Mode 1 into an EU Compliant 15.5mph 250w?
Which battery was use for the performance of this controller? 52v? 60v? 72v?
Does it work for an Super73 ZX
Can this unit be used on a ZX version?
Does this eliminate the motor cutoff when jumping curbs?
It has as far as we can tell!
Can do it to every super73?
Will this affect the torque update as I have yet to do it on my RX?
This replaces the torque update. You won't get any more S73 updates or support.
Does this controller have memory saving capability? If I leave it in mode 2 and turn the bike off, will it stay in mode 2 when I turn it back on?
“It will always start in Mode 1, which is a US Class 2 (20mph top speed, 750W output). This is a legal requirement. You can use the (+) button to cycle through to Mode 2 (US Class 3, 28mph top speed, 1200W output), and Mode 3 (private use, unlimited, 36mph top speed, 2500W output).” - handlworks email support
Excuse my ignorance, but do you need to change the mode in the Super73 app since it starts it in Mode 2 when you power on the bike? Maybe I missed that part. 🤭
No more Super73 app, this replaces the stock controller! It'll start in Mode 1 (Class 1 ebike), and you can toggle ride modes with the arrow keys on the display.
Is the controller as well as all the connectors waterproof?
The controller is IP rated for dust and waterproofing, as is the display. Since ebike connectors have varying levels of ingress protection, we recommend protecting all connectors if riding in very wet conditions.
Can it make nami klima fster?
Does pedal assist still work with that controller?
Pedal assist still works!
but realistically you didnt develop it ,you had a wiring harness made up for allready available products ,good products to chose yes ,
Took me quite a while to realize that by 'compatible with your stock bike' means 'compatible only with Super73 ebikes'. Maybe this should be said or even be the part of the video title...As a BBs02 owner, I did not find this video useful for me.
So if I get an upgraded battery it will be even faster?
this controller is an absolute ripoff except its small so you can hide it places in the bike, otherwise anyone can grab a $80 50a kt controller and get the same performance.