Toyota pickup 4x4 3.4 swap
ฝัง
- เผยแพร่เมื่อ 28 ต.ค. 2024
- RELIABILITY : Rear main seal ,Injectors service, Valve cover,Timing belt.
MOUNTING:3.0motor mounts and brackets.
COOLING: 3.0 fan shroud,3.0 radiator,3.0 Fan,3.4 fan clutch. 3.4 upper radiator hose 97 4runner, lower radiator hose custom autozone part #E71927
ELECTRICAL:Battery power source relocation,3.4 battery terminal cables from starter and engine block ground.Toy only swap wiring,3.4 Alternator with plug.
Accessories:3.0 clutch/Flywheel/throwout bearing. 3.0starter. 3.0 power steering lines with banjo bolt.
EMISSIONS SYS: 3.4 charcoal box, 3.4 intake system, 3.4 catalytic converter and front and rear 02 sensors.
A/c System: 3.4 compressor using 3.0 compressor top plate. 3.0 stock lines
Fuel SYstem: 3.4 fuel hose.
Oil system: T100 with 3.4L 4x4 oil pan, oil dipstick, oil pickup tube.
Parts sites. www.toyonlyswa... for harness and crossover pipe
Body lift I used a 3/8in. You use the stock bolts and no mods need to be done and came from this site www.yotashop.c...
THANK YOU FOR WATCHING, ANY QUESTIONS REGARDING THE SWAP PLEASE ASK AND I WILL BE MORE THAN HAPPY TO RESPOND. TAKE CARE AND STAY SAFE.
This video really helped man 👍 made it a lot more simplified for me
What a solid and reliable engine. Looks very professional. Well done.
Thank you
Deserves millions of likes this is a perfect video identical to my up coming swap your great man
I have an 88 Longbed I plan on doing this-excellent video!
Very helpful and straight to the point. Thanks very much!
I wish i could give you a million likes man!
Great vid I want to do this to my 90 runner very helpful I will be going back to your vid when I start mine just want to find a wrecked donor with a rear e locker
Thank you I am glad it helped .
I am picking up a donor rig next week cant wait to get it started
@@tylerpearce2891 I wish you best of luck if you have any questions send me a message.
Nice video! Nice work!
Nice video. Did you have to install a body lift for hood clearance? If so what size body lift did you use.
3/8 in lift from yotashop
Thanks
Great video. I am about to do this swap in a couple of weeks, I have almost all of the parts, not sure what to do about the exhaust, I have been told by someone who has done a bunch of swaps to just use the exhaust off of the 3.0 with an a down flow o2 sensor. Did you use the exhaust off of the 3.0 or the 3.4?
Thank you, I used the exhaust and cat from a 4runner the only mod needed was to move the cat back 6 in back and make the pipe over the axle and the exit pipe, for the o2 sensors you need to get the sensors that match the ECU.
@@cesardubon1 Ok cool thanks, I have the o2 sensors for that. My concern was more in terms of the pipe diameters, because three 3.0 is 2" and the 3.4 is 2.25".
@@billw5235 the exhaust was from a 4runner 97 with a 3.4 L so 2.25 for the entire system
@@cesardubon1 Ok thanks for your help it's much appreciated.
@@cesardubon1 I went to get a Magna Flow muffler for it and it turns out it has a 2.5" diameter, didn't want to leave the wrong diameter here and leave bad information.
Mine made it to 260k on my 2000 4runner engine and it killed over. Just ordered a jdm 3.4 5vzfe engine. Got it delivered to the mechanic shop. He calls. Says the oil pan is different and he's not sure if it'll work? Asked if there was a difference between the 2x4 and 4x4. What the heck does that have to do with the engine? Said the oil dipstick is in a different place so wouldn't they just be able to swap my engine's oil pan with the JDM 3.4 5VZFE I just bought? Then something about the exhaust would need changed!?!?! Like I'm freaking out. I dropped 2k on this JDM Engine from FLORIDA and live in OKLAHOMA. I am supposed to meet the mechanic at his shop at 8am in the morning and he's going to show me what he's talking about. I'm again freaking out. Does anyone know if all is good and he's just going to need to use my old engines oil pan and sump pump and he's over reacting.... or even clueless? What the ever loving shit have I gotten myself into. Help my fellow 3.4 yota people!!!!!!!!!
I believe Jdm has different intake plenum,exhaust
How did you get the 4x4 to work?
What about the hood? Did you have to cutt the hood for it to clear?
3/8 body lift from yota shop you can use the stock bolts and the truck looks like factory
What kind of price are you looking at to do a swap like this? Not including the motor or trans
I couldn't tell you a price I do this as a hobby. you live around as vegas?
Not much labor other than removing the old engine instaling the new one however if ya have a 22re you need new engine mounts. And 22r needs a Efi harness upgrade.
No I don’t. I asked a shop near me if they could do it I have a 1993 pickup with the 22re and I asked if they could swap the 3.4 in and the guy to me it was a very major swap and that the 3.4 has security that has to be flashed. Do you know what he is talking about?
@@blakecampbell1413 1995-1998 were not chipped I would start by asking the dealer if your ECU is chipped or not. What year is the donor
I don’t have a year picked out I’m trying to find out what years are the best to go into the 93
Is there any modifications you have to do to make the 3.0 mounting brackets fit on the 3.4? And if I move the brackets I don’t have to do a body lift?
I didn’t modify the brackets I used a 3/8 body lift very easy to install
@@cesardubon1 where i can get it ? What brand im sorry?
@@JoseLopez-ep9jl the body lift is from Yotashop www.yotashop.com/toyota-pickup-truck-1989-1995-3-4l-5vz-swap-body-lift-3-8-kit-1038/?gclid=Cj0KCQjww4OMBhCUARIsAILndv54Fc3bH07G8ky6YRRmFXrJbQ9F8ZesATOhS-ScDDt1nA3SLw6y1JMaAjLgEALw_wcB
@@cesardubon1 thank you so much..👍
I've been on a 3.4 swap video binge the past 2 days. My 3.0 threw a rod thru passenger side of block a few days ago. So mine is a 95 4runner 4x4 with automatic trans. 100% stock. Can I just swap in a 3.4 and still use my auto trans and 4x4?
How many miles did that engine make it to?
@@lk6912 158,000 miles
Hey man, what's your contact info? i've been searching for a video like this for a while. I'm trying to get the project started soon on my 1994 runner
My name is Cesardubon on instagram, you can message ask me anything you need on the swap. I will be more than happy to help you out.
NemexReviews thanks man
I have new motor 3.4 you can hell me wish Electric Sistem please my 4runner have 3.0
Like the wiring diagrams?
AWESOME VIDEO, MORE PLEASE
More to come!
what about the throttle and cruise control cable?
My apologies for the delay I have not set up the cruise control however I will set it up soon
@@cesardubon1 cool. Let us know !