ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Pandaplacer-A1 IN ACTION with various packages | Desktop pick and place machine driven by OpenPnP
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- Pandaplacer-A1 IN ACTION with various packages.
The overall speed in OpenPnP is set at 80%, and the average speed including nozzle switching and deceleration of some components is about 700 CPH. Without the use of advanced vision functions in OpenPnP, Pandaplacer-A1's bottom camera provides support for package sizes from 0402 up to LQFP-176.
The electrolytic capacitor and inductor use a generic threshold, which is less stable and requires specialize for the packages later.
BambooFeeder-AS1 feeders work stable most of the time after fine tuning, not perfect (two 12mm feeders are not adjusted that well), but still much better than the strip feeders that require frequent manual loading. The goal of AS1 feeder is to replace as much strip feeder as possible using a low-cost approach ($3-$5 per feeder, and will be opensource), for components that are used in smaller quantities, you can also use auto-feeding without hesitation. When the 16mm and 24mm AS1 feeers are completed, it will be possible to reduce the strip feeder's occupation of the effective PCB area.
pandaplacer.com
00:00 - Intro
00:15 - Start
00:43 - LQFP-64
01:12 - SOT-223
01:22 - FFC-0.5-40P
02:04 - SMA
03:10 - QSOP-16
03:22 - ESOP8
03:46 - TYPE-C-16P-SMD
04:00 - CE-6.6X6.6
05:37 - R0603/C0603
11:24 - SOT-23-3
11:52 - SOD-323
13:05 - End
I'm going to purchase mine soon!
I just ordered one this morning, looking forward to building my first OpenPnP machine!
Hope it will be a good start for you to playing with OpenPnP!
Hi. Can you share a link to buy ?
We would be super interested in you feedback. Please, do not forget to comeback and share, maybe even do an unboxing!
@@Pumoneon Once my kit arrives I will certainly follow-up with my experience. Hopefully not too much longer.
@@Pumoneon Mine has been received and is now assembled and seems to be working great. I'm in the process of 3D printing and building 20 of the auto feeders now before I can run a real job on it.
Purchasing one now! I’ll try to put together a build and testing video if anyone is interested.
Thanks for the support. You will get the same machine as in the video (without the MINI-PC hanging on the back, feeders need to be printed). It would be great if you could make assembly and test videos from the user's point of view and give some suggestions.
Have fun pick and place!
Yes please, do us an unboxing review, etc! Really looking fordward to it 🙂
If you please, that would be great!
I would love seeing your opinion on the PnP! :)
Just arrived. I’m a little busy this week but I’ll try to have some videos out ASAP.
Seems like a good machine, I think it could be a great machine with more documentation, specifications and info on the machine is quite scarce on the product page/website. It's very solid however, is it attached to the workbench? Would love to see an attempt at full speed!
Thanks. The documentation is a lot of work, so I'll have to do it gradually.
The machine is placed directly on the desktop, but with 3D printed enlarged feet with silicone pads. The machine can move faster, but will bring more vibration and noise. I will demonstrate it later at a faster speed.
What a nice project, so glad I found it! I'm thinking about buying a pandaplacer, I'm a bit hesitant though because I would need to mostly place 0402. Do you have any recommendations for feeders that are compatible and work reliably with 0402? Or is your feeder design upgraded that much at this point that it should work?
looks great wish I has opted for the Samsung nozzles like you guys instead of the Juki.
JUKI's springs are more gentle, but the CN type is smaller and lighter.
When will the kits be available again on Aliexpress?
Amazing!
This looks like a great little machine. I'm new to the PNP part of manufacturing but i am indeed looking into it rapidly with this machine at the top of my list. Is there a good source for parts and materials that warrant a machine like this vs getting PCB assembly done from the PCB manufacturer? I'm in a rabbit hole when it comes to finding parts on a reel for a good price, or cut tape solutions. Honestly, I'm slightly confused when looking for them. Cheers!
Thanks. It is now easier and cheaper to buy cut tape parts, such as lcsc.com, which many people use now. Small desktop PnPs are not as fast as commercial machines and are more suitable for DIY, R&D, and small-volume pilot production. It is expected that with the gradual development, future machines will become more and more efficient and easy to use.
Does anyone have an educated guess as to how much import duty and tariff there will be on this item assuming a cost of $700-$800USD?
Hi @Pandaplacer. Is there a link to buy? Aliexpress is not accessible in my country.
Hi, please email me sales@pandaplacer.com
Do you intend to design a drag feeder? My designs are all 0402 and I have many different values on my boards. This means that the more narrow the feeder, the better.
Hi, the current priority is to complete the design of the AS1 series feeders and optimize the performance as much as possible. The A1 machine has an open frame, allowing you to use any size compatible feeder system, or design your own feeder as needed. Perhaps more later, there will be a drag feeder reference design.
@@pandaplacer Thanks for the information. I was digging around and found a 3D printable push-pull feeder reference design that has promise.
Yes, @markmaker4345 has a good push-pull feeder design, but because the A1 is a bit compact, it may need to improve the design or only be mounted on the front side of the frame. I had an similiar design before, but the performance was unstable and not as good as AS1, so I didn't finish it.
Does your feeder works with RC-0402 parts ?
Hi, at this stage AS1 is not able to handle 0402 components stably. I will continue to make some design updates. Also, the feeder system is standalone and can use any size compatible feeder system. Stay tuned.
Camera details name?
Hi! Can you please tell me if the placer and the bamboo feeders can handle 0402 very well? Can you please also tell me if the bamboo feeder is open source and the files available?
Thanks!
At the current stage, BambooFeeder-AS1 feeder is not yet able to handle 0402 components stably because of component jumping and positioning accuracy issues. I will do a series of optimization design to handle 0402 as much as possible. Also, in the future, there will be geared motor based feeders.
Yes, AS1 will be open source, the design is just not all finished yet. See pandaplacer.com
is this 2020 or 3030 aluminum profile ?
Hi, it is 2020 type.
How to order? Aliexpress store is empty...
Maybe because of regulation or logistic restrictions, some countries can't show the products in Aliexpress store, try to switch to other countries to view, or contact me: sales@pandaplacer.com
I contacted this person, Leo. SEEMS TO BE A FRAUD!!! Be ware! I was in the process of ordering one, but he kept changing the deal about delivery. Then I called him out and he said that he was in this just to take people's money.
Hi, I don't know why you say that. Maybe it's just because I didn't fulfil your request to place an order twice because of the pressure of the order accumulation? I guess that's honesty rather than fraud?
Also, why do you say I am just taking people's money? If that's the case, shouldn't I be taking more orders? Do I need to spend 2 years designing a product and then just to scam a few orders? Also, the AliExpress isn't my own wordpress/shopify website, I don't receive any payment until 2 weeks after the user confirms receipt.
If you're B* W*, I'd say it's just that I didn't meet your demands, we didn't make any deals, you didn't place any orders, I didn't attack you, and you don't need to register a new account to post your imagination. I understand your dissatisfaction, but at the moment I have limited capacity.
I did make a mistake, and I have stopped receiving new orders. Because I made all the PCBs myself (A1 did most of the SMD work), plus a lot of pre-processing and pre-assembly work, plus more accessories than other products, the total workload was far more than I thought. It's only in the last week that I've found a suitable helper.
Some users have already received their package and have successfully assembled and run the machine. I did not ask to leave user comments on the store page, they can do so as they wish.
All current delayed orders will be sent out in the next 1-3 days (sorry for the delay, many thanks to everyone for their patience).
All interested and doubtful users can continue to wait and see. I have confidence in my product and it will be better and better.
Your accusation is completely unwarranted, and Leo is no fraud. I ordered and received exactly what was promised--more in fact, as he included a vacuum reservoir and a neat little panda bear as a bonus, as well as plenty of spare screws, t-nuts, fittings, and hoses. He responds to emails promptly, offers excellent support, and after following the detailed instructions he provided with the order, my machine is running smoothly. You should be ashamed of yourself.
I just received mine yesterday, as ordered. We had to wait quite a bit, Leo had a few delays, but he is very responsive and kept communicating very well. Just to tell it is not a fraud, in my opinion, just a small manufacturer with a great product, doing it's best.
@@JackBrunier-qv7jv Maybe, but unlikely, you may have allegedly received a unit...the 98% who have not hold a different opinion. Spending peoples money to survive while you attempt to start a company is fraud...
Unfortunately, you're also wrong in this imagination. Until the order is completed (buyer confirms receipt), even the shipping costs are advanced by me. I'm just small&slow right now, no other reason.
You can be dissatisfied, but don't make it up, it's pointless.