Fantastic video. Very entertaining and so funny. I've set up a carving station very similar to what you made. I'm happy to see that another European thought the same. Great job.
Hey Konstantinos, I am so happy about your words mate! Yeah, I like to see, that people are creative to cut stones without having such expensive cabbing mashines. Thank you again and see you soon herein with another Video upcoming
Love the drip system ypu made, it's probably even cheaper than mine. I bought an anti siphon valve set for an aquarium, 10 bucks, some tubing, 5 bucks, and an old juice bottle and silicone sealant. It's low tech, hacky, but works perfectly.
Yes Don! With just a bit creativity we can create something that works for most of the things you need to start. Thanks for your comments and for watching the vid 🙏
great vid..so much work...the supplies, the set up, the editing...the kitty!!! thank u for posting this...i have most of the supplies and i'm still rubbing my rough pebbles in coconut oil..
Nice set up like your ingenuity I just got sum raw opal at gem show and am wanting to process it cool to see u don't need a huge pro setup to do it keep up the good work
I just discover your videos, i like what you do man ! Congratulations, i use like you home made staff to polish and cut australian opal. Im in france. Good luck
Hey Bonnie! 🙃 I'm happy about the compliment, that's a lot! 🙏 I love my dremel, but I'm working on a setup with a pendant motor to get a little less rpm, that should do even a better job. Will post a video of something awesome, when it's finished
I am planning to do cutting on budget but instead of buying dremel tool for carving I have purchased a nail drill It still can hold the carving diamond tools and etc. Reason why I bought the nail drill over the dremel tool... Many dremel tools on budget are battery powered or single speed. With the nail drill I can go down to 4000rpm if needed or use pedal. Most budget dremel start at 10krpm or 5000rpm and speeds are fixed. - on ebay Your setup looks great but I don't have space for something like this, I will try hand carving using the speed pedal and shape the opal stone. The good thing about having lower rpm allows you to shape/cut more carefully in some areas. Especially if you are a beginner - Blackopaldirect suggested. Great content looking forward for more.
Thanks a lot for this feedback 🙏!! I haven't thought so much about the rpm so far but this is an important thing. Yeah, my dremel-tool is also starting at 10.000 rpm and I never go higher. The Nova Points are really helping here not to cut off to much. Let me know about your progress and experience 👍. p. s. My girlfriend would appreciate, when I buy a nail drill 😅
@@opalbadger9367 First thing that I have noticed with the nail drill you can't change the hole for different tools. The speed adjustment makes some difference but not too much. Instead of having stationary station I have bought some wooden sticks and wax that is used for opal cutting . Makes it easier to cut rather than holding the stone in your hand. I believe it is better to buy regular dremel (without speed adjustment, and I did buy it) It's handy to have slow and fast tool but not necessary. From my experience cutting opal isn't as easy as it looks on videos, but still a fun. I love the results at the end of it.
@@VIDEOSBYPATRYK thanks for sharing your experience! I already was looking to buy a cheap one too. I also feel comfortable with the dremel tool so maybe I continue without a nail drill. Today I worked very long with my setup and I tried out some crazy things to handle the rpm. I will share in the next videos some funny and some really usefull "tricks". You´re absolutely right, it´s not easy but it´s so much fun!! Enjoy this hobby!
Love the lo fi set up! I have been trying to figure out how to lo fi myself into cutting some labradorite into tiny pieces for a project, have fallen down a stone cutting worm hole now, I may never get back out.
@@opalbadger9367 At the moment I am trying to cut thin slices of labradorite, I think it is the best method to get good pieces to use for an inlay ,due to the directional nature of the colour in the stone. I was messing around with small stone chips for ages trying to get them to behave the way I wanted them to, though cutting bigger rocks is messy, it is starting to produce much better results. There is something magic about slowly revealing the natural and unique beauty in each rock
I really enjoyed the video, a very clever cabbing station indeed. Presentation w was spot on too. I subscribed so I look forward to the next installment.👍
I was curious if cutting opal gems could be done with a rotary tool, so I looked it up and your video was second on the list, right under my favorite TH-cam channel "Black Opal Direct ". Very cool little set up you got, I knew it could be done, I had a couple of the same ideas as you , except I probably wouldn't have ever found time to make a set up like yours, my 4 year old son keeps me busy. 😅 Great video my friend! 😉👍🤘😎
Hey Peter! I can highly recommend to start this journey! Get your first opals on opalauctions.com or eBay to try it out. It's just a bit of preparation and makes much fun to cut an discover some gems. Yeah, it will cost you a bit but think it's worth to try out
I would highly recommend to buy sintered diamond burrs here: www.opalauctions.com/stores/53frogs/lapidary/carving-burs/ They will save you money while grinding expensive rough opal :)
Mensch ist kind. You are sooo cute…Junge. My bastard mother was German. Horrible woman but…I am here to tell you… I love how you joked about mispronouncing “through” durch. Gorgeous! I also love your cat. Eines suesses Katz…ja! My Deutsche is wayyy worse as we spoke only English at home. I love your videos.
I can only try to discribe how ot works in my setup. For sure the waterbowl has to be up and the you only need a hose with something added to control the waterdripping. In my case i used some medical stuff, im not sure it was called hose clamp or just catheter (not sure about right translation). Anyway I found this important piece on amazon for few bugs. Hope that helps 🙃
Hi, very nice setting! I have a grinder from when i used to do Stained glass projects, i am thinking to use that for cutting and polishing the opals, do you know if they send diamond nova tips for grinders? Could you advise a diamond nova tips supplier? Thank you!
Thank you! Depends where you live. I got my stuff from Germany and one time I had good experience with a supplier from the US. I'm not good informed about grinders, but surely can search for the link if you tell me where you live
Thanks for sharing. You are a resourceful person. Rotary tools are very versatile. I have some dremels and also Ryobi battery powered tools. Did you make your own protective shield also?
Way cool! Thank you for the video. Question- how did you glue the opal to the stick? Im getting ready to add some fake (lab grown) opal into a knofe handle i am working on
Hey Bill! Thank you for the comment! I am using dop wax. I think it is the most common way. It is a bit tricky and surely not easy to do at the beginning but you must easyly find some good educational videos on TH-cam
I love your videos and the way you can work with common materials to make jewelry it is really helpful to see the whole process 😊 I just wanted to ask what was the tool that you used to hold the opal when you were grinding it
I laughed out loud multiple times throughout this video. Thank you for all the effort you put into making it. Your set up is awesome! I hope to create something like it. Question: I’m an absolute beginner and haven’t actually started yet (waiting for my rough opals to arrive in the mail) and am currently just researching and watching tons of videos. (Yours is my favourite thus far) But my question is about cutting your hands. Is it possible to wear gloves when starting out? Not something bulky but just something to help avoid scrapes and warn me before I really cut into skin? I have sensitive girly hands that cut like soft cheese.
Hey! Thank you so much for your words, they mean a lot to me! For the risk to cut the hands, first of all: it should be possible to avoid injuries by being more careful than me ;). There are Silicon Finger caps you should find easy on amazon. Have tried them out, in my opinion they are good for protection but can treat the handling of the opal you cut. You should try out, if these will work for you
Was that aussie white opal. Can you you tell me what you would price that stone at. With so much red I'm thinking your cutting tool would be paid off x5
Hey Dean! Thanks for your comment mate! Yes, it's lightning ridge and from the body tone it should be categorized as a dark opal from what I know 🤔. People told me that it's value ist about 150 to 200AUD a carat. The stone weights 2,65ct.. I found this one in a parcel of 6 or 7 stones that costs me 120AUD
Thank you mate!!! 🙃 Weights 1,65ct. and measures 9mm x 6,5mm. Not sure if I wanna sell it, because I do silversmithing for a while and maybe will need this barrel shape stone for a Ring. What do you think generally about its Value? Heard something round 150 per ct. Can't say if this is to high or low. Any help would be appreciated.
@@opalbadger9367 I really dont have a clue about prices, not too sure how youd find out. I know the Munich gem fair has a number of opal dealers that attend so if your anywhere near there it could help.
People don't understand that you can do this pretty cheaply. I started with sandpaper then I got sintered and nova burrs for the dremel I bought 15 years ago.
The coarse one? It's a diamond burr I got from Amazon. Surely not the perfect quality. There are some called sintered diamond burrs, you will see them on TH-cam channel Roys Rocks. Roy gives the best information about cutting stones with rotary tools. Hope this was helpful
Thank you for the video, it must have taken you FOREVER, but it was inspiring! I’m wondering why something like tweezers with some protective coating couldn’t be used to hold the rough opal during the grinding? It might prevent some unfortunate injuries, but I’m sure there’s a reason…breakage probably? Since I’m apparently looking for a “shortcut”, (don’t mind the pun!), would a basic rock tumbler worth for the original grind?
Thank you for the words! For the first video it has taken me really a long time. I'm always to inspire and give ideas to get people starting this wonderful hobby. For the tweezers: I would say it's mainly about handling the stone or controlling the pressure. After grinding the stone to a basic shape you change to a dop stick (wooden stick with dop wax) which is working perfect. I think there's a high possibility, that the stone will flip out of a tweezer. For now I'm only using rotary tools, I think it's about you personal preference and you budget. So if you can afford one and you get used to the Maschine for a good cutting result, this should not be a bad idea 😉
Hey, it is a 30euro Amazon trash dremel 😅. It has variable speed options but minimum of 10.000rpm, what is quit high and had some troubles espacially with Boulderopal. Maybe I will change it to a dremel with possibility to work at 5.000rpm.
Hey Tyler! I asked some people. I'm not sure, this one weights 1,65 and people I asked said to me, that it may be 150 to 200$ a carat. So I would say something round 250-300
Hey Charles! This dremel is a no name from Amazon costs me 30 bugs. I would recommend to use a dremel with a flex shaft to get lower rpm. Mine has lowest speed 10.000rpm, so that's not perfect, but will do the job
@@opalbadger9367 thanks! Found one with 5,000 rpm.at lowest so seems ok. Where do you buy you'r dop sticks' wax? 8mm diameter dop sticks are ok? Or this diameter is too big for a beginnet like me?
@@charlesdeveille5870 my dop wax I got from a cabbing shop in Germany. There must be a shop near you where you can find the wax, or just check out eBay maybe. You should find it also easy on opalauctions.com. The shop 53 frogs has some prepared dopwaxsticks.
Die Google-Suchanfrage hat Dich als deutsch-native speaker verraten ;) Verrätst Du uns, was Du als Dopwachs verwendest? Schellack oder Siegellack oder was ganz anderes? Beides einmal ausprobiert? Sind das äthiopische Opale? Gutes Video, mach weiter so! Viele Grüße
Hey Denis, danke für die lieben Worte! Ich muss zugeben, dass ich absolut keine Ahnung habe, was ich da verwende, aber es funktioniert super. Habe es in diesem Shop gefunden, ist aber wohl gerade ausverkauft: www.aquarus.net/shop/artikelueber.php?wgruppeid=238&wgruppe_offen=238&sid=e13f1bda13db25c253741cef1717bcdb
Fantastic video. Very entertaining and so funny. I've set up a carving station very similar to what you made. I'm happy to see that another European thought the same.
Great job.
Hey Konstantinos, I am so happy about your words mate! Yeah, I like to see, that people are creative to cut stones without having such expensive cabbing mashines. Thank you again and see you soon herein with another Video upcoming
A finger is bleeding, the opal badger doesn't give a fuck. More videos, please!
I'm SO doing this! Thanks fellow stonecutter! I shall pass this knowledge on to the other dwarves!
Brilliant! Making the best of your situation was a great thing to watch.
Appreciate your words! Thanks!! 🙏 Next video is nearly ready to upload
Cool set up! Exactly what I’m looking at doing! Thank you!
Thanks a lot! Appreciate that
Awesome, I’m all over this.
So cool to watch the whole process. Great work and I love the low budget approch! keep it up! :)
❤️ Thank you!!!
Love the drip system ypu made, it's probably even cheaper than mine. I bought an anti siphon valve set for an aquarium, 10 bucks, some tubing, 5 bucks, and an old juice bottle and silicone sealant. It's low tech, hacky, but works perfectly.
Yes Don! With just a bit creativity we can create something that works for most of the things you need to start. Thanks for your comments and for watching the vid 🙏
great vid..so much work...the supplies, the set up, the editing...the kitty!!! thank u for posting this...i have most of the supplies and i'm still rubbing my rough pebbles in coconut oil..
Thank you Maria! Appreciate that you liked it! 🤩
Informative, well thought out set up, and over all great editing and humor! love the video! Great job!!!!
Oh thank you so much!!!!! 🙃 Thanks for all the lovely words!
Nice set up like your ingenuity I just got sum raw opal at gem show and am wanting to process it cool to see u don't need a huge pro setup to do it keep up the good work
That is an awesome setup!!!! MacGyver Approved!!!!!! 🤘🤪🤘
🤣🤣🤣 wait for the next one. Still have to solve some problems with it but will be more awesome
I just discover your videos, i like what you do man ! Congratulations, i use like you home made staff to polish and cut australian opal. Im in france. Good luck
Hey Edouard 🙂
So nice to read your words man! Thank you so much! Sending my best regards and wishes to you in France 🇫🇷! 🙃
👍👍👍
Great video,very informative for new players.👍
Love your video; laughed and learned some things. Awesome, thanks!
🙏🙏🙏 you are awesome! Thanks a lot
Thank you so much for sharing. You are very creative and ingenious!
Jose!! You're awesome mate! Thanks for the good words man
Very clever and informative. I love the setup. I will be making one quite like it!
Thank you ❤️!! What an honor! Waiting for your feedback, when you built it 🙂
Great video. I use a dremel also. Innovative solutions . Great job.
Hey Bonnie! 🙃 I'm happy about the compliment, that's a lot! 🙏
I love my dremel, but I'm working on a setup with a pendant motor to get a little less rpm, that should do even a better job. Will post a video of something awesome, when it's finished
Hey thanks for the shout out!!!! You are great my friend
Hey Nick! Thanks for inspiring me to start with all of this! Your videos brought cutting opals in my life! Great to have you!!
Awesome little setup !!!
🙏 Thanks! It's still working very well, new Video in progress 😊
Nice cheap set up, good video,well done😊 inspiring to me
Thank you for that! 🙏🙏🙏
I am planning to do cutting on budget but instead of buying dremel tool for carving I have purchased a nail drill
It still can hold the carving diamond tools and etc.
Reason why I bought the nail drill over the dremel tool...
Many dremel tools on budget are battery powered or single speed.
With the nail drill I can go down to 4000rpm if needed or use pedal. Most budget dremel start at 10krpm or 5000rpm and speeds are fixed. - on ebay
Your setup looks great but I don't have space for something like this, I will try hand carving using the speed pedal and shape the opal stone.
The good thing about having lower rpm allows you to shape/cut more carefully in some areas. Especially if you are a beginner - Blackopaldirect suggested.
Great content looking forward for more.
Thanks a lot for this feedback 🙏!! I haven't thought so much about the rpm so far but this is an important thing. Yeah, my dremel-tool is also starting at 10.000 rpm and I never go higher. The Nova Points are really helping here not to cut off to much. Let me know about your progress and experience 👍.
p. s. My girlfriend would appreciate, when I buy a nail drill 😅
@@opalbadger9367 First thing that I have noticed with the nail drill you can't change the hole for different tools.
The speed adjustment makes some difference but not too much.
Instead of having stationary station I have bought some wooden sticks and wax that is used for opal cutting . Makes it easier to cut rather than holding the stone in your hand.
I believe it is better to buy regular dremel (without speed adjustment, and I did buy it)
It's handy to have slow and fast tool but not necessary.
From my experience cutting opal isn't as easy as it looks on videos, but still a fun. I love the results at the end of it.
@@VIDEOSBYPATRYK thanks for sharing your experience! I already was looking to buy a cheap one too.
I also feel comfortable with the dremel tool so maybe I continue without a nail drill.
Today I worked very long with my setup and I tried out some crazy things to handle the rpm. I will share in the next videos some funny and some really usefull "tricks".
You´re absolutely right, it´s not easy but it´s so much fun!! Enjoy this hobby!
Lol, great video. I think you have a talent my friend if your just starting.
Hey Corey! Thanks for watching and your words! I don't know, I'm just a freakin' perfectionist 😅
Very creative setup!
Thanks mate!!!
geez all these decades I thought it was harder than that. I have me a dozen 1lb rough opal I wanna try now. I cant wait till payday
Thank you..really appreciated all the information..and that was a beautiful opal
🙏🙏🙏 Thanks a lot Ann!
Love the lo fi set up! I have been trying to figure out how to lo fi myself into cutting some labradorite into tiny pieces for a project, have fallen down a stone cutting worm hole now, I may never get back out.
Thank You Luli! I wanted to try out cutting labradorite too, is it much different from opals, do you know?
Stone cutting makes you addicted 😅
@@opalbadger9367 At the moment I am trying to cut thin slices of labradorite, I think it is the best method to get good pieces to use for an inlay ,due to the directional nature of the colour in the stone. I was messing around with small stone chips for ages trying to get them to behave the way I wanted them to, though cutting bigger rocks is messy, it is starting to produce much better results. There is something magic about slowly revealing the natural and unique beauty in each rock
Nice vid. Congrats!
Thanks mate!
I really enjoyed the video, a very clever cabbing station indeed. Presentation w was spot on too. I subscribed so I look forward to the next installment.👍
Thank you Jeni 😊. Really appreciate your great support. You always take the time to write some nice words! 🙏
Excellent, thank you, good sir. Naughty boys!
Hahaha wasn’t ready for you to be hilarious. Please make more.
Wasn't ready for your nice words 😅! Thank you so much for that 🙏🙏🙏
I was curious if cutting opal gems could be done with a rotary tool, so I looked it up and your video was second on the list, right under my favorite TH-cam channel "Black Opal Direct ". Very cool little set up you got, I knew it could be done, I had a couple of the same ideas as you , except I probably wouldn't have ever found time to make a set up like yours, my 4 year old son keeps me busy. 😅 Great video my friend! 😉👍🤘😎
Amazing Content! Keep it up. Cant wait for more videos.
Huge inspiration brother keep grinding!
Thank you a lot George!!! I'm up to create more content
As soon as you played the music from R&M when you cut your finger. I was like, "O no he didn't " love your style keep doing what you're doing
Hey Steven! I really appreciate your word mate!! Love the song, so much expression in it 😂
Cool video
Cool accent
Cool cat.
Thanks from Colorado!
I get the opal addiction. Gosh I would love to try this out.
Hey Peter! I can highly recommend to start this journey! Get your first opals on opalauctions.com or eBay to try it out. It's just a bit of preparation and makes much fun to cut an discover some gems. Yeah, it will cost you a bit but think it's worth to try out
Nice work mate. Love the set up. I think i will definitely be rigging myself up something similar. Awesome looking Gem you ended up with. 🇦🇺⚡️👍🏻
Hey Steve! Thank you mate!! Hope you will create yourself a wonderful place to cut nice gems! 🙂
More videos man
Deine Sache sind super
Danke! Ich arbeite dran. Das nächste kommt sicher in ein bis zwei Wochen 😉
Underated video, cheers mate
Thanks mate! 🙃 Cheers
Amazing, thanks for sharing! 😊
Thank you for watching and commenting! Next video is in Progress 😊
I like 🙌 more content, please! ♥
Thanks for sharing this.
Cheers Famo59 👍🍻⛏🤓
😅 Thank you!! Cheers 🍺😁
Hahaha through ?! Thats the best , you legend haha thanks forvthe video - very helpful
The germans are not good with "th" 😅. At least it's good for make some fun 😊
Great video
Sy sangat suka dengan videonya yang detail,dan peralatan yang bagus apakah alat itu bisa juga untuk menggosok dan memoles batu Ruby terima kasih.
Terima kasih atas kata-kata yang bagus! Thank you!!!!!
😊
Thanks for the 🎥
Thank you Terry 😁
Thank you
You're welcome mate! 🙃
thanks for that
Most welcome!!! 😊
Great vid, are there specific dremmel grinder youb Recomend, i added a magnet to a lerimer stone, took forever to cut a 1/4 inch circle
I would highly recommend to buy sintered diamond burrs here:
www.opalauctions.com/stores/53frogs/lapidary/carving-burs/
They will save you money while grinding expensive rough opal :)
I prefer this style over a large saw as you can take a dremel virtually anywhere.
Yeah, true!!! Love the dremel. Also a bit cheaper 😅. I bought a foredom flexshaft, but still working with this setup
Mensch ist kind. You are sooo cute…Junge. My bastard mother was German. Horrible woman but…I am here to tell you… I love how you joked about mispronouncing “through” durch. Gorgeous!
I also love your cat. Eines suesses Katz…ja! My Deutsche is wayyy worse as we spoke only English at home.
I love your videos.
Thank you for the good words! The word "through" is the endboss for germans 😅. I am happy to made you laugh, all the best for you!
Thanks for video, much appreciated. Could you please show the water system?
I can only try to discribe how ot works in my setup. For sure the waterbowl has to be up and the you only need a hose with something added to control the waterdripping. In my case i used some medical stuff, im not sure it was called hose clamp or just catheter (not sure about right translation). Anyway I found this important piece on amazon for few bugs. Hope that helps 🙃
Nice bro
Thanks bro 🤩
We're just STARTING OUR ADVENTURES in Lapidary. 1st vid
Have a good starting! Do not get too addicted 😉
Hi, very nice setting!
I have a grinder from when i used to do Stained glass projects, i am thinking to use that for cutting and polishing the opals, do you know if they send diamond nova tips for grinders? Could you advise a diamond nova tips supplier? Thank you!
Thank you! Depends where you live. I got my stuff from Germany and one time I had good experience with a supplier from the US. I'm not good informed about grinders, but surely can search for the link if you tell me where you live
Thanks for sharing. You are a resourceful person. Rotary tools are very versatile. I have some dremels and also Ryobi battery powered tools. Did you make your own protective shield also?
i just dug up a 109 lb fire opal vein. if your interested in gem quality .. thank you for the video
Oh wow! Thanks a good find, congrats! I m taking a break from cutting, so actually I also am not buying. Have a good day mate
mega video! Sehr hilfreich und genau mein humor. Aber sag mal, wie bist du an diesen plastikschutz für den dremel gekommen?
Way cool! Thank you for the video. Question- how did you glue the opal to the stick? Im getting ready to add some fake (lab grown) opal into a knofe handle i am working on
Hey Bill! Thank you for the comment!
I am using dop wax. I think it is the most common way. It is a bit tricky and surely not easy to do at the beginning but you must easyly find some good educational videos on TH-cam
I liked the video but i would have liked to hear and seen you explaining step by step for beginners
I love your videos and the way you can work with common materials to make jewelry it is really helpful to see the whole process 😊
I just wanted to ask what was the tool that you used to hold the opal when you were grinding it
Hey, thank you!!! You mean the stick? It's just a wooden stick with dopp wax on it
I laughed out loud multiple times throughout this video. Thank you for all the effort you put into making it. Your set up is awesome! I hope to create something like it.
Question: I’m an absolute beginner and haven’t actually started yet (waiting for my rough opals to arrive in the mail) and am currently just researching and watching tons of videos. (Yours is my favourite thus far)
But my question is about cutting your hands. Is it possible to wear gloves when starting out? Not something bulky but just something to help avoid scrapes and warn me before I really cut into skin? I have sensitive girly hands that cut like soft cheese.
Hey! Thank you so much for your words, they mean a lot to me!
For the risk to cut the hands, first of all: it should be possible to avoid injuries by being more careful than me ;). There are Silicon Finger caps you should find easy on amazon. Have tried them out, in my opinion they are good for protection but can treat the handling of the opal you cut. You should try out, if these will work for you
Hu wo bekomme ich die duamanten stifte in verschienden grip stärken.
LG.BERND
Was that aussie white opal. Can you you tell me what you would price that stone at. With so much red
I'm thinking your cutting tool would be paid off x5
Hey Dean! Thanks for your comment mate! Yes, it's lightning ridge and from the body tone it should be categorized as a dark opal from what I know 🤔. People told me that it's value ist about 150 to 200AUD a carat. The stone weights 2,65ct.. I found this one in a parcel of 6 or 7 stones that costs me 120AUD
Where did you get the splash guard for your Dremel machine??
It was inclueded in the dremel set. Pimped it up with a piece of Plastic.
@@opalbadger9367 Ah cool. I think I’ll just do a macgyver job on a 2L coke bottle then 🤣🤣
@@The_Opal_Leprechaun 🤣🤣🤣 you are awesome!!! I was up to suggest something with a bottle. You will make it work for sure
I chose this guy for opals bcos he likes honey badgers
En qué página de internet compraste los nova point?
Hola Erick, suvalapidary.com/collections/lapidary-carving-burs
is it possible to do this with synthetic opal?
nice video mate, very encouraging . Do you have any idea of the final weight and size of the finished stone.
Thank you mate!!! 🙃 Weights 1,65ct. and measures 9mm x 6,5mm. Not sure if I wanna sell it, because I do silversmithing for a while and maybe will need this barrel shape stone for a Ring.
What do you think generally about its Value? Heard something round 150 per ct. Can't say if this is to high or low. Any help would be appreciated.
@@opalbadger9367 I really dont have a clue about prices, not too sure how youd find out. I know the Munich gem fair has a number of opal dealers that attend so if your anywhere near there it could help.
@@steve81nz39 thank you! So far I only tried those Facebookpricing groups, that I really like espacially cause I really don't have a clue 😅
People don't understand that you can do this pretty cheaply. I started with sandpaper then I got sintered and nova burrs for the dremel I bought 15 years ago.
You're right! It's not so expensive to start, but I have to say, that the Opal addiction made me spent more and more money 😅
@@opalbadger9367 I just bought a parcel of small white creek opals yesterday. You have inspired me! Lol.
What bit dis you use to pre shape it ?
The coarse one? It's a diamond burr I got from Amazon. Surely not the perfect quality. There are some called sintered diamond burrs, you will see them on TH-cam channel Roys Rocks. Roy gives the best information about cutting stones with rotary tools. Hope this was helpful
I do this exact thing but with turquoise
Thank you for the video, it must have taken you FOREVER, but it was inspiring! I’m wondering why something like tweezers with some protective coating couldn’t be used to hold the rough opal during the grinding?
It might prevent some unfortunate injuries, but I’m sure there’s a reason…breakage probably?
Since I’m apparently looking for a “shortcut”, (don’t mind the pun!), would a basic rock tumbler worth for the original grind?
Thank you for the words! For the first video it has taken me really a long time. I'm always to inspire and give ideas to get people starting this wonderful hobby.
For the tweezers: I would say it's mainly about handling the stone or controlling the pressure. After grinding the stone to a basic shape you change to a dop stick (wooden stick with dop wax) which is working perfect. I think there's a high possibility, that the stone will flip out of a tweezer.
For now I'm only using rotary tools, I think it's about you personal preference and you budget. So if you can afford one and you get used to the Maschine for a good cutting result, this should not be a bad idea 😉
Btw. love the pun! 😂😂😂
Can you give links to the materials to make that bench?
what dremel is that does it have variable speed options?
Hey, it is a 30euro Amazon trash dremel 😅. It has variable speed options but minimum of 10.000rpm, what is quit high and had some troubles espacially with Boulderopal. Maybe I will change it to a dremel with possibility to work at 5.000rpm.
You're funny bro.
And the dub sticks used
How much can you sell a piece of opal like that for?
Hey Tyler! I asked some people. I'm not sure, this one weights 1,65 and people I asked said to me, that it may be 150 to 200$ a carat. So I would say something round 250-300
Great work mate and an awesome set-up 👍
By the way, can I ask how much you paid for your rough opal in this clip ?
Thanks mate 🙏
This one was in a parcel of some roughs I bought on opalauctions and I think it was 120$ or 130$. Had good luck 🍀😅
@@opalbadger9367 , awesome parcel and you did a great job 👍👍👍
Hi, what is the reference of the dremel?
Hey Charles! This dremel is a no name from Amazon costs me 30 bugs. I would recommend to use a dremel with a flex shaft to get lower rpm. Mine has lowest speed 10.000rpm, so that's not perfect, but will do the job
@@opalbadger9367 thanks! Found one with 5,000 rpm.at lowest so seems ok. Where do you buy you'r dop sticks' wax? 8mm diameter dop sticks are ok? Or this diameter is too big for a beginnet like me?
@@charlesdeveille5870 my dop wax I got from a cabbing shop in Germany. There must be a shop near you where you can find the wax, or just check out eBay maybe. You should find it also easy on opalauctions.com. The shop 53 frogs has some prepared dopwaxsticks.
@@opalbadger9367 thanks! I'll try on opalauctions then!
Die Google-Suchanfrage hat Dich als deutsch-native speaker verraten ;)
Verrätst Du uns, was Du als Dopwachs verwendest?
Schellack oder Siegellack oder was ganz anderes? Beides einmal ausprobiert?
Sind das äthiopische Opale?
Gutes Video, mach weiter so!
Viele Grüße
Hey Denis,
danke für die lieben Worte!
Ich muss zugeben, dass ich absolut keine Ahnung habe, was ich da verwende, aber es funktioniert super. Habe es in diesem Shop gefunden, ist aber wohl gerade ausverkauft:
www.aquarus.net/shop/artikelueber.php?wgruppeid=238&wgruppe_offen=238&sid=e13f1bda13db25c253741cef1717bcdb
Der in dem Video ist ein dunkler opal aus lightning ridge. Ich stehe auf die australischen Opale 😅
@@opalbadger9367 super Sache, vielen Dank.
cerium oxid?
Yesss
U stil use this?
No, actually no time for cutting 😵
Next time have a step by step
Boring
Bravo, great work.