Chase get a heat lamp to pre warm your molds, blender and injector up with so that your plastic won't cool off so fast while injecting. Also to make your plastic go further have you tried chopping or getting a cheap small food processor to really grind up your leftover harden pour tails and mixing cup cured plastic and mix it with new plastic for up to a 4 to 1 mix. I use to manufacture many different soft baits and we would use regrind as we called in in plastic a lot.
The best weedless top water bait ever made. The strike king grass frog Bill dance edition would be great since the don't make them anymore and are hard to find.
Very nice. I just started making soft baits and made a two part injection mold it of plaster of paris. It kind of works but the main body part almost always had a bubble or is hollow. The mold also isn't super smooth so that transfers to the bait and they aren't shiny. I need to make some aluminum molds or vac 50 molds...
Absolutely love your video's bud! One day I want too fish Sam Rayburn and Fork. I want too punch, drag, flip and frog the light put of them! Till then I'm stuck in Ohio!
Love the vids...new sub and looking to get in to making my own plastics....your vids are BY FAR superior to the other guys making these type of vids.....keep it up bro!
I got into it a while back. I have a 6" straight tail worm mold 8" curl tail worm mold 4" swimbait mold 4" curl tail grub mold 2 gallons of top grade plastic 4 pyrex cups 14 colors of flake 8 colors of pearl bait bags worm oil and heat stabilizer im in it about $900
I am just getting into it. You can start off with one or two molds off Amazon or eBay, a cheap microwave oven and some plastisol, injector and some colors / glitter pretty cheap.
I have some 'real' molds on the way, but just bought an aluminum 'Creepy Crawlers' mold on eBay from the 1960s for $14 with shipping. It has a worm, scorpion, dragonfly and spider on it. Will try to catch some fish on a creepy crawlers worm and scorpion.
Get a hairdryer or a heat gun and preheat the mold and injector and you wont have any bad pours. I don't make soft plastics but I cast bullets and that is standard casting practice to preheat molds, ladles, etc. Anything that will rob the heat from the casting medium.
Enjoyed your video, I didn't know u made baits. I do too I got about 10 molds, very addicting lol. I noticed you suck up the plastic then discharge it, why do you do that?
Sam dont but the essentials lol get the crystal clear......its a lot better to work with and hold the hook better.......use a medium for better durability use soft for more action......but both are a lot more durable then keitech
nice video. very informative, but just a warning to viewers he has alot of money invested in this. aluminum molds and that much colors and powders adds up to well over 100$
What kind of mold is that and where can I get it
This stuffs awesome, really want to get into it! Maybe a intro/tutorial into making your own soft plastics?
Definitely do more of the plastic pouring vids! It's an addicting hobby for sure
Chase get a heat lamp to pre warm your molds, blender and injector up with so that your plastic won't cool off so fast while injecting. Also to make your plastic go further have you tried chopping or getting a cheap small food processor to really grind up your leftover harden pour tails and mixing cup cured plastic and mix it with new plastic for up to a 4 to 1 mix. I use to manufacture many different soft baits and we would use regrind as we called in in plastic a lot.
Amazing color man! I am looking at get started making my own plastics this winter.
Which injection mold did you use?
***WARNING*** May cause extreme addiction and lighten your wallet!! Awesome video man, really nice swimbait! Glad I found your channel!
Nicely done... Great idea to past the time away this winter.
The best weedless top water bait ever made. The strike king grass frog Bill dance edition would be great since the don't make them anymore and are hard to find.
I would like to see those in my box lol. I wanna come make some hoss
Great video you make it look so easy. we could do with those 3.8 swim baits here in Australia
SHAD 3.5 " on waiting ! on the same colour as you made on this awesome video, thanks body huge work !
Great lure,can u tell please where did u bought the aluminium mild for swing impact. Thank you !!
Bout how much did this cost if you don't mind me asking, and what is an absolute needed for this I have an idea but you look experienced
nice mold. where you bought it?
Make a bluegill color next please.
That's sweet man , how much did that set up roughly cost you if you don't mind me asking ? I'm very interested in doing this
Very nice. I just started making soft baits and made a two part injection mold it of plaster of paris. It kind of works but the main body part almost always had a bubble or is hollow. The mold also isn't super smooth so that transfers to the bait and they aren't shiny. I need to make some aluminum molds or vac 50 molds...
What mold are you using?
Where do you get your molds at
Great color and great video 👍😎
Do you think it’s cheaper to make the baits your self or to buy them?
Chase..........bro....2???Were did you get that mold..Are you fishing lake Athens near Athens TX??
Is the injector a must have or can you still lures by poring the plastic in the molds ?
Absolutely love your video's bud! One day I want too fish Sam Rayburn and Fork. I want too punch, drag, flip and frog the light put of them! Till then I'm stuck in Ohio!
Love the vids...new sub and looking to get in to making my own plastics....your vids are BY FAR superior to the other guys making these type of vids.....keep it up bro!
Do you still use the non aluminum molds you got from baitmold? If so, how have the held up?
How much does all the molds cost
Do you use your home made plastic lure in saltwater
Can u make a video of u making a mold of the swimbait u made this video
Have you got into tubes by chance there is no videos that I can find. That color is sweet
What mold is this?
How do these swimbait compare to the keitechs? Only saw the single mold is that mold you have a custom made one.
make more vids like this this is the reason im subbed to you
If you have multiple molds can you inject more than one more at a time without needed to clean the injector?
Have you tried the supersoft plastisol? Does the regular plastisol feel and react like a keitech? They are quite squishy!
Nice job
Hey chase where did you get that mold?
baitmold.com i can tell by each cavity having its own fill spot. Was looking at same mold's today but they ship from oversea
thats not a do it mold, do it is shit@@edsonrodrigues8336
who made the dual injector ?
Pls make more like this
will do
Hey bud how much does it cost for a a set for a first time
Where do you get your color ideas from?
Awesome video! 👍🏼
Where did you purchase the blending tool???
I currently make crankbaits and have started to make soft plastics what color X2 dyes do you use the most... a top ten would be appreciated
from license plates to swim baits. lol good video
Well done! Nice bait and video
nice vid man im thinking about making my own stuff looks like fun and i can make the colors i want
Can you do a homemade black shade like the kiTech swim impact fat swim bait
Do you sell your lures that you make
wow! i will learn to do it myself...thanks for sharing
Where do you get the injectors and all that?
How would you make the tail a different color from the actual bait?
What kind of mold it that where do I buy it at
Can you pour without an injector is you just want one color
What's an estimated startup cost to do this I'm semi-retired just looking for something to do
I got into it a while back.
I have a 6" straight tail worm mold
8" curl tail worm mold
4" swimbait mold
4" curl tail grub mold
2 gallons of top grade plastic
4 pyrex cups
14 colors of flake
8 colors of pearl
bait bags
worm oil
and heat stabilizer
im in it about $900
I am just getting into it. You can start off with one or two molds off Amazon or eBay, a cheap microwave oven and some plastisol, injector and some colors / glitter pretty cheap.
Good stuff...thank you.
Great video!! Can you add the links for the molds?
Like these videos! Do you think it's overall worth it?
AW Fishing over time you might save money but you can buy a lot of baits for what I spent getting all the stuff
Did you sell it?
Can u make a video on how to make a mold?
What's a better way to melt plastics because in the microwave it could contaminate the food
What would you charge for a dozen of these
which company's mold did you use in this video???
Damn those look great.
What mold brand is that
i have a question about "GLITTER" can i use the stuff you buy off the shelf at say like wal-mart or target? help this noob out bro! THANKS!!
how can i get some baits
I like to see you catch some Bass on them swimbaits.
Sweet vid where did you get the mold
baitmold.com
Hey man where did you buy your mold I need one hahaha
how would you stiffen up the plastic so the bait isn't as noodly.
I have some 'real' molds on the way, but just bought an aluminum 'Creepy Crawlers' mold on eBay from the 1960s for $14 with shipping. It has a worm, scorpion, dragonfly and spider on it. Will try to catch some fish on a creepy crawlers worm and scorpion.
if u could but a link on here for the stuff that would be really cool
Get a hairdryer or a heat gun and preheat the mold and injector and you wont have any bad pours. I don't make soft plastics but I cast bullets and that is standard casting practice to preheat molds, ladles, etc. Anything that will rob the heat from the casting medium.
Great Video
I would like to see a swim bait that is Pumpkin with watermelon flake.
if you could do that, that would be great
Enjoyed your video, I didn't know u made baits. I do too I got about 10 molds, very addicting lol. I noticed you suck up the plastic then discharge it, why do you do that?
To make sure I don't have any air in the injector
Chasin' Bass hmm, I have same injector and never had a problem, just seems like how u shoot it back in cup will introduce bubbles in plastic.
Love the color man, keep up the good work, enjoy your videos
Make some extras and ill buy some off you
Where do you buy the supplies to make these?
doitmolds.com
good video do more like this
They look Great
Awesome thank you
3 color baits next?
How do get amber brown color
Thank you
So good
Where do you buy that at
baitmold.com
I'm guessing you can use the dual injector for just one color?! I'm wondering, get the single or dual injector?
420redbarn... you can take the dual injector apart to do 1 color
good news (except for the cost of the dual and mixing block), thank you!
Where did you get that mold, have been looking for one but can't find one
Riley Bush should be at just do it molds
baitmold.com/
Where did you buy the mold?
baitmold.com/
How much
Maybe a time lapse of you making a bunch of baits just keep posting these videos
Thats a keitech! You don't fool me !
Hey guys, ss the essential series plastisol durable? If so, how durable would you guys say it is? Can it handle landing multiple fish?
Sam dont but the essentials lol get the crystal clear......its a lot better to work with and hold the hook better.......use a medium for better durability use soft for more action......but both are a lot more durable then keitech
Where do I get the molds
baitmold.com ;)
nice video. very informative, but just a warning to viewers he has alot of money invested in this. aluminum molds and that much colors and powders adds up to well over 100$
Hey are you selling some? I would love one custom made 😍
no sorry
Yo dude do u like steal license plates or something ? But dope vid
Молодець.👍