How To Replace A Plunger In A Gravity Fed Iron
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Step by step tutorial on how to replace a plunger in a gravity fed iron.
www.cleanersup...
Visit us at www.cleanersupply.com for more parts, supplies and helpful videos.
This video applies to the following products:
www.cleanersup...
www.cleanersup...
www.cleanersup...
www.cleanersup...
www.cleanersup...
Lisa, I just bought the little plunger part, from your company, of course. I couldn't believe how easy this was to replace. My iron is now working again. Thank you so much!
I lost the some part long ago and thanks to this i know that its a spring ..thankfully i manage to for aome spring and finally repaired mine.
Just checked the plunger, which was pretty simple. Spring seemed fine, but the switch does not move the plunger when tested as per instructions. No clicking sound. Is there a replacement for the switch?
Thank you. This is great.
Sapporo iron black wire in back I see three , one to pump
A ground left alone.
You just save me,I was already perplexed
How to make the vapor come out
Thank you for this video. I just replaced the spring and plunger, although it wasn't as easy as it should have been. The top nut was so tight it unscrewed the whole part from the iron. I had to use a vise to eventually unscrew the right part and it was a pain getting the bottom part screwed back in. Anyway, I am now getting steam from the iron but I hear a buzzing noise each time I press down on the button. Is that ok?
I have a brand new Sapporo 527. About an hour after I started using it tonight, the iron would not stop steaming, eventually dripping out as a fast leak. Would the plunger be the culprit for this? Any idea what would cause such an issue on a brand new machine?
whoops: turned out I forgot to install the small filter to the inside of the water tank valve before adding the resin and water. Looks like lots of resin had gotten into the plunger and must have knocked it out of place. I was able to follow your steps and clean it out and the plunger works fine now! Thank you!
My question,is ,some water is coming out from the hose nipple ,close to the plunger part when steaming
Sadly my Hi Steam MVP 35 quit heatingthe water. I cannot afford a new setup. The iron is still working. I received a list of repairshops all in other states. Florida and Carolina not doing it any more.. What other steam generator irons do you suggest for use in all my families pressing needs.? I don't want to go back to regular irons. I am spoiled.
Thanks for the video ma...but please how do I order for the thermostat and the knob controlling it because the knob is broken and thermostat is stiff...thanks from Nigeria
One coshen hav hoto repir termo ajast met
I have a one like that , plz explain me , Why does the button keep broking
Hi. Do you have any videos on how to troubleshoot an iron that wont turn on? Thanks?
Hi do you know what part should be replaced if the iron is not heating?
Super❤️
🙏 mem mery pas bhi yhi prisc h or usny steem bnana bnd krdiya h usko kys thik krna h ap mujhy bta skte ho
Does anyone have a temperature chart for the dial on this iron? I've been searching for days and I can not find specific information.
How to change thermostat in this iron
How to attach the hose? It’s a tight fit.
Saya pernah punya tetapi saat dipakai uapnya sedikit dan tombolnya koneksi ke uapnya lama keluar juga temperatur tidak fungsi bagaimana cara mengatasinya? Mohon maaf saya pakai bahasa indonesia karena bahasa inggris saya pasif.
How to repair steam switch mam
How to repar that iron?
Make it into a toilet plunger but it was a ghajini iron rod