DIY miniature dollhouse kit Magic house - step by step assembling tutorial
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- Hi everyone! Today I want to show you amazing miniature dollhouse kit - Magic house! I hope you'll like this assembling tutorial.
Cute room: Magic house
I ordered it here: www.cutebee.ne...
I love the stickers, they are very easy and very convenient to work with - you just need to peel off the sticker and it's super easy to stick it on! And most importantly, no glue is needed for such parts! This is my second big DIY miniature dollhouse kit where stickers can be used and I am very happy with this wonderful idea! But also note that not all paper parts are stickers: for example, parts that must be double-sided or three-dimensional - these are not stickers.
I'm so in love with this beautiful magic house with tiny furniture and real lighting! Only a few parts need to be cut out (for example, the pages of a book with mushrooms, since they need to have beautiful curly edges), the rest of the parts are already almost completely cut out and pop out on their own and you don’t even need scissors!
To make the plants and flowers look beautifully realistic and stick well, I glued artificial moss (which was already in this kit) to the stems and leaves that needed to be glued to other parts. It looks really good and the glue sticks better to moss than just plastic.
For the transparent parts, I used UV gel instead of glue to create a beautiful transparent glass effect.
About glue:
1. Slow-acting "MOMENT CRYSTAL transparent glue by Henkel". I use it for paper and textile because it's almost invisible and has a rubber texture. I use it for gluing paper on wooden parts and it perfectly glues wallpapers, books and all the small paper items.
2. Fast action "Adhesive MOMENT GEL by Henkel". This adhesive bonds very quickly and holds walls, furniture and other items. With this glue, I glue wire, metal parts, wooden parts etc. So I always use both.
3. And this time I used one more - the third one was UV gel instead of glue. I used it to create a beautiful clear glass effect on the transparent parts (UV epoxy will work, but I ran out of it and i used my UV gel nail polish from Kodi. But please note that it must be not sticky "Soak-off" top). If I have glue somewhere where it shouldn't be, I paint it on top with UV resin or gel nail polish (But please note that it must be not sticky "Soak-off" top). It's better to have a glossy glass or water effect (which UV resin gives) than just a white patch of glue
The video is very long, but every detail is very interesting and I want to show you all of them! As you know, I always try to show you every detail, but sometimes I don't show all the same type, similar items, for example, books or small boxes, but this is not the case, here all the details are different and very beautiful.
More miniature houses and rooms are coming soon. Thanks for watching!
#dollhouse #miniaturedollhouse #tinydollhouse #DIYdollhouse
Simply fantastic & magic. Thank you for your inspirational service. I think this is a buy. Arida thank you much.
Thank you very much dear Francesco! ❤ I can highly recommend this kit! This is one of my very favorite, it is very beautiful and it makes me very happy every time when I look at the shelf where it stands! I love the stickers, they are very easy and very convenient to work with - you just need to peel off the sticker and it's super easy to stick it on! And most importantly, no glue is needed for such parts! This is my second big DIY miniature dollhouse kit where stickers can be used and I am very happy with this wonderful idea! But also note that not all paper parts are stickers: for example, parts that must be double-sided or three-dimensional - these are not stickers.
I'm so in love with this beautiful magic house with tiny furniture and real lighting! Only a few parts need to be cut out (for example, the pages of a book with mushrooms, since they need to have beautiful curly edges), the rest of the parts are already almost completely cut out and pop out on their own and you don’t even need scissors! To make the plants and flowers look beautifully realistic and stick well, I glued artificial moss (which was already in this kit) to the stems and leaves that needed to be glued to other parts. It looks really good and the glue sticks better to moss than just plastic. About glue, now I use B-7000 (I assembled this house long ago so I used other glues but now I use B-7000). I'm very happy that I found this glue, assembling become much easier! But it is slow-acting, after you glue 2 parts together you have to wait and then glue the third one. But the result worth it - it is 100% transparent, invisible and holds great! In my opinion, and this is the best glue for gluing anything that looks like glass. Before this, I tried many different ones but B-7000 glue is a thousand times better. When I don't want to wait I use fast acting super glue Moment gel from Henkel. But you can make every kit with B-7000 only. If you'll have any questions about assembling or about everything else, please ask!
@@AridaBjd Arida I did a long reply to you but seams to be gone or maybe forgot to click reply because was opening new windows to see what to order. I am a newbie and certainly appreciate all your suggestions especially about glue. I already ordered this kit and 2 sets of B-7000. For fast drying i heard good things about BEACON 3-in-1 Advanced Craft Glue.
You arranged this kit much better then the original photos and you did fantastic job with artificial moss. Have talent and thank you much to love this hobby as much as i do. Thumbs up!!
Very beautiful house! I love this enchanted garden on the rooftop!
Thank you very much!🌷
love your garden part . thank you for sharing your process .
Thank you very much dear! ❤
Wonderful magic doll house
Thank you very much!
I love it! X3 This is just the vibe for my mini selves studies room.
Thank you very much dear Briana!❤
@@AridaBjd Your welcome.
@@brianahawkins8124 Have a great weekend sweetheart! 😽
❤❤❤❤❤
Thank you very much sweetheart!❤
👍❤
Thank you very much!❤
What kind of glue would you recommend? I like to glue everything in place once it's were I want it.
I use B-7000. I'm very happy that I found this glue, assembling become much easier! But it is slow-acting, after you glue 2 parts together you have to wait and then glue the third one. But the result worth it - it is 100% transparent, invisible and holds great! In my opinion, and this is the best glue for gluing anything that looks like glass. Before this, I tried many different ones but B-7000 glue is a thousand times better. When I don't want to wait I use fast acting super glue Moment gel from Henkel. But you can make every kit with B-7000 only. (T-7000, T-8000 are very good too).
If you can't find B-7000 I recommend you to glue transparent parts (beads, lamps etc.) with Hard UV resin "QIAO QIAO DIY" instead of glue to create a beautiful transparent glass effect. It's clear acrylic resin that gets cured under UV (ultraviolet) or direct sunlight in minutes. It's perfect to create water and other liquid effects (or you can use UV gel nail polish. When I ran out of it I used my UV gel nail polish from Kodi. But please note that it must not be sticky "Soak-off" top). And if I have glue somewhere where it shouldn't be, I paint it on top with UV resin or nail polish because it's better to have a glossy glass or water effect than just a white patch of glue.
And if you can't find B-7000 or similar glue I can recommend you to glue wallpapers and paper parts with the slow-acting "MOMENT CRYSTAL transparent glue by Henkel" (or Patex). I used it before I found B-7000 and the result was great. I still use it for paper craft projects because it's much cheaper than B-7000, I had left over and it can be found at the nearest local store. It's perfect for paper and textile because it's almost invisible and has a rubber texture, it can be used for wallpapers, books, pillows, blankets, and all the small paper items).
Also, What kind of glue do you use? I've been experimenting and really am not happy with tacky glue GREAT JOB! LOVE THIS ONE!
Thank you very much dear!
1. Slow-acting "MOMENT CRYSTAL transparent glue by Henkel" (or Patex, they have same). I use it for paper and textile because it's almost invisible and has a rubber texture. I use it for gluing paper on wooden parts and it perfectly glues wallpapers, books and all the small paper items.
2. Fast action "Adhesive MOMENT GEL by Henkel" (or Patex, they have it too). This adhesive bonds very quickly and holds walls, furniture and other items. With this glue, I glue wire, metal parts, wooden parts etc. So I always use both.
3. And this time I used one more - the third one was UV gel instead of glue. I used it to create a beautiful clear glass effect on the transparent parts (UV epoxy will work, but I ran out of it and i used my UV gel nail polish from Kodi. But please note that it must be not sticky "Soak-off" top). If I have glue somewhere where it shouldn't be, I paint it on top with UV resin or gel nail polish, it's better to have a glossy glass or water effect (which UV resin gives) than just a white patch of glue. To make the plants and flowers look beautifully realistic and stick well, I glued artificial moss (which was already in this kit) to the stems and leaves that needed to be glued to other parts. It looks really good and the glue sticks better to moss than just plastic.
Lot of paper parts are stickers, they are very easy and very convenient to work with - you just need to peel off the sticker and it's super easy to stick it on! And most importantly, no glue is needed for such parts! This is my second big DIY miniature dollhouse kit where stickers can be used and I am very happy with this wonderful idea! But also note that not all paper parts are stickers: for example, parts that must be double-sided or three-dimensional - these are not stickers.
😍😍😍😍😍😍😍
Thanks a lot dear!
what glue are you using plz
I recommend you B-7000 clear glue (or T-7000, T-8000 are very good too). You can make this kit only with this one (slow-acting, transparent, invisible and holds well). I use it now, but I made this kit a long ago so I used other glues (that was before before my friend recommended me B/T-7000 glue), so please choose which gluing method you like best. When I was making this kit I used:
1. Slow-acting "MOMENT CRYSTAL transparent glue by Henkel" (or Patex, they have same). I use it for paper it's almost invisible and has a rubber texture. I use it for gluing paper on wooden parts and it perfectly glues wallpapers, books and all the small paper items. As far as I know, "Moment by Henkel" is a popular company in Europe and this glue is often found in supermarkets, the tubes say that it is made in Germany, "Patex" is an American identical glue with a different name. If you can't find the same you can use any invisible glue slow acting glue with rubber texture, that was made of resin.
2. Fast action "Adhesive MOMENT GEL by Henkel" (or Patex, they have it too). This adhesive bonds very quickly and holds walls, furniture and other items. I use it for wire, metal and wooden parts etc. This glue is best for gluing floor, walls to each other, and then walls to the floor, as well as all the wooden furniture. This glue bonds very quickly and it's very strong.
If you'll can't find same glue you can use any fast super glue in a small long tube that looks alike
And may be that can be useful for you: I use Hard UV resin "QIAO QIAO DIY" - clear acrylic resin that gets cured under UV (ultraviolet) or direct sunlight in minutes. It's perfect to create water and other liquids effects (or you can use UV gel nail polish. When I ran out of it I use my UV gel nail polish from Kodi. But please note that it must be not sticky "Soak-off" top). If I have glue somewhere where it shouldn't be, I paint it on top with UV resin or nail polish because it's better to have a glossy glass or water effect than just a white patch of glue.
What's wrong with B-6000?@@AridaBjd
@@cherylharvey3229 I don't think there's something wrong with it, I just haven't tried it yet so I can't recommend it before I try it myself. I asked Google for some info and here what I found: "E6000 is a solvent-based adhesive that sets in minutes. It is a regular adhesive that can provide a common bond. It is strong and versatile and can be used on many different surfaces ranging from plastic to fabric. On the other hand, B7000 is a single-component epoxy that can provide superior adhesion. It is a strong bond that stays flexible. It is also environmentally friendly and transparent in color. B7000 is more specialized than E6000 and is specifically designed for use on fabric and leather. B7000 glue is much easier to work with compared to E6000. It is transparent and does not cloud up rhinestones. It comes with a pin embedded in the cap, making it easy to apply precisely. I found that I could use it with practically anything I needed to glue, and it provided perfect precision with no excess glue strings to clean up. The built-in syringe also eliminates the need to buy a separate one". Here is the full article:
www.stickyaides.com/a/e6000-vs-b7000/