$200 Bullet-Proof Alaskan Chainsaw Mill Setup. Build Your Own! #80
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2022
- I have milled HUNDREDS of logs with this setup that took me only a day to put together. It is truly indestructible and will last a lifetime.
Follow the measurements and add a chainsaw and you will have lumber for many years to come.
My video comparing several different milling chainsaw side-by-side:
• Comparison of Chainsaw...
Link to my earlier How-To-Chainsaw-Mill video:
• Chainsaw Milling- How ...
Where I found this design originally:
• Logs to Lumber: Alaska...
Because I’ve gotten so many questions about the gear that I use on the channel, here are some of the most important pieces I use every day:
(I do receive a small commission from sales associated with the following links. Any income from these sales goes directly to supporting me in making new videos for this channel!)
**I will not share links to products that I don't use regularly or that I wouldn't buy again.**
Granberg Chainsaw Mill amzn.to/3cdRXvn
Inexpensive Chainsaw Grinder/Sharpener amzn.to/38LHfNP
(If it is out of stock, the following looks similar though I can't vouch for it:) amzn.to/3KMGemW
My Favorite Piece of Gear- Chainsaw Helmet amzn.to/3uuW5xB
How I Keep the Mosquitoes Away! amzn.to/3frenvh
Big, Black Log-Peeling Knife - Becker BK9 amzn.to/3oZIeOH
The Trailer I Use Behind My 4 Wheeler- Yutrax amzn.to/3fvO8DK
Bug Net Rooms I Use amzn.to/3uwOK0l
Portable Heaters in My Tent and the Deer Castle amzn.to/3frQ7Jh
Thank you all so much for supporting this crazy endeavor! Without you folks donating to Surviving Ringworm, I wouldn't be able to even consider staying out here in the wilderness a THIRD year making videos. You seriously blow my mind!
/ survivingringworm
(As a thank you for donating $5 or more a month through Patreon, I will carve your name into the picnic table and show it in an upcoming episode.)
If you don't want to donate monthly but still want to support the channel: paypal.me/survivingringworm - แนวปฏิบัติและการใช้ชีวิต
I'm 70 years old and every time I thought I had a IDEA someone else already had been there and done that.
That doesn’t mean you didn’t invent it, it just means you can’t take credit for it.
Ecclesiastes 1:9 NIV
What has been will be again, What has been done will be done again; there’s nothing new under the sun.
why is that.
Me to.??
The issue you're describing with the chains is that you weren't using a ripping chain at the start. Standard chains are cut at 25-30 degree angles which is too aggressive for milling. A ripping chain is cut at 10-15 degrees. A skip tooth ripping chain is the best way to go as it's not aggressive and the skip teeth allow enough space for chips to be properly discharged, allowing your saw to run at a higher constant rpm.
I was just going to add the same comment. Lots of people don't understand the difference between cross-cut and rip-cut.
@@wxfield Thank you both. I've never heard of the difference!
On my 038, I run double skip ripping chain.
Where do you get your skip tooth rip chains
If you look up the parts distributor for Oregon Forestry in your area then you can contact the distributor directly. In Canada it's CPT and Theo Turgeon. @@uncleharley1
I have no intention to mill trees, but your video was worth watching from start to finish. You're a natural teacher with a voice and manner that's easy to watch and listen to. Thanks!
I'm not sure why this video came up on my feed but it was absolutely facinating. I live on 10 acres in SC and I had not thought of using a chainsaw mill before. Now, many projects are very doable. Thanks!
For my mill, so I didn't lose too much of the log, I made a "Ladder Frame" from Uni-Strut (From Menards) and then made Pointed Studs from 1/4"=20 Bolts - sharpened to a point. I lay the ladder frame on the log, with the sharpened bolts mounted on the ladder rungs, pointing down. I just tap them down with and axe or hammer and start milling. I lose around an inch of log on my first slab. Works pretty good and easy/fast to setup. I could draw this up if you, or others, have any interest/questions.
Me too
I thought of that style but is it fast to install and have it parallel to the center point of the log. I'm using the same dual rail system as Mr ringworm and it's very adaptable to non perfectly straight logs.
Pics?
I'm also interested. I had a similar idea but this far only got as far as the ladder unistrut frame, which rests on some ply brackets. My clever plan to cut the unistrut down to make it easier to move the top cut bracket around backfired, since now it keeps trying to sag in the middle
That sounds pretty cool
Once I got a job with a company that gave us free boots each year, and a co-worker suggested extra wide boots, even if they needed to be ordered instead of just bought at the store. Its a big help, comfortable right away. Also, we are required to have safety toe. One job I worked outdoors in the snow, and no matter how warm my legs and feet were, my toes were so cold they were in pain. I got a "composite" toe instead of steel, and they are awesome. Lighter than steel, and toes don't get cold anymore.
I just bought 10 acres (and the small Granberg log mill) in Washington state. I have had SO much fun out there. Working on a picnic table now. Finished my alder sawhorses about 5 days ago. I love your videos man. I think they helped me finally pull the trigger. Thank you, brother
Where in Washington? 5 months 5 acres i imagine you spent alot. Heck i have a woodmizer i might sell it to you ;)
I just bought a chainsaw, but Ringworm is definitely an inspiration. Right now, it's for firewood, but this is very interesting too.
@@Yettiattack Western Washington, South Puget Sound. How much for the Woodmizer? : )
@@natemorlock2379 11k 30 blades new guide rollers/belts to addition the ones that are on. An a saw carriage cover.
Sooo very helpful, thank you! I'm a 62 yr old female felling all my trees,and am ready to start milling and have watched hours of jumbled and incomplete. Keep doing what your doing !! Pamela Brewer Choctaw AR
One of the better milling setup presentation I’ve seen and not over complicated. Thank you.
My first video on your channel. I have a few words I would like to share with you that I imagine are not very typical, since log milling is not my usual haunt on YT.
1: I very much appreciate what I judge to be your sincere and honest wisdom you are sharing regarding your experience. Even the self deprecating remarks. Maybe even especially the self deprecating remarks. All too often people feel compelled to share their wisdom, as if it the acme of accumulated wisdom for their topic. While obviously falling far short of the target they were aiming at. Watching someone engage in such thorough and well said candor about their experience was enough to make me continue watching a video I typically have little interest in engaging with.
2: I also appreciate your willingness to just plant your ass in an area, and make the most out of what you have, the best way you can, with the tools and knowledge you have available to you. There is much to be said about not only an honest days work, but also for that very same work slowly pulling you towards enjoying the wine of satisfaction that the vineyard you are tending to has produced. It is a vanishing ethic. One which I very much miss being surrounded by.
Good luck in your labors, man. I look forward to vicariously sharing in your successes and failures, as I plan on subscribing to your channel on those above merits alone. Thanks.
It’s like learning saw milling from Jack Johnson.
Halaka ukulele, I’m sawing on the daily
Milling all these pine trees, making all these nice things
Milling yourself saves you a ton of $$$. Dude your lucky most of us can't do that or have the resources. Thank you for the content.
If you follow your cuts with wedges every two to three feet, opposite sides behind the saw, your cuts will be pinch free and smoother. Chain is not the problem as long as it is a rip chain. A slight angle in the cut, like slicing cheese, works good too.
I’ll definitely have to come back to this in spring. I despise working in the cold like you. Have yet to add a winch and am using the biggest cheapest Chinese chainsaw I could afford. Definitely takes alot of time but appreciate your tips here. So thanks. This is what we are here for
1st time here. I really enjoyed it.
Finally, you suffered over a year before got it right, now you enjoy it.
It reminds me of my baking habit. I started making our bread and some pastry years ago. Now I am able to bring good stuff out by any circumstances. If someone asked me how to do it right, I would say it is easy. You have to screw it up few hundred times, and you got it.😊
"I never had an original thought in my life" 🤣 Subscribed right there and I dont even own a chainsaw.
I provide for my wife and 3 children. My wife stays home with the kids so money is very thin. Our back porch is heavily used and I can’t afford lumber to replace our rotting deck. I want to say thank you for this. You helped a ton. God bless you.
Excellent video. I'll probably never use a chainsaw mill but I now feel I can confidently baffle them with my bullshit down at the local tavern.
This is the first video I've seen from you. Extremely informative, straight to the point w/ no BS. I really appreciate the time you spent on this video, I learned some invaluable info. Subbed, greetings from Germany 🇩🇪 👍 🍻
Same as the other two. Want a bandsaw mill, but may try this first. I have oak. Saw another video where two guys used what looked like an aluminum ladder for their bars. Were doing long lengths, wide cuts, 48 inch chain bar. They didn't give any how to's. Yours....very informative.
Thanks. Subscribed.
Algorithm brought me here. This is a satisfying thing to watch. With all the fir trees we have, this would be awesome to have.
Some years ago, my brother and I milled a huge pile of cedar logs, that averaged about ten inches, with a borrowed 52" commercially-made bandsaw mill. Neither one of us had ever done this before, but we figured it out pretty fast. I ended up having to machine new roller guide blocks for it, as the original ones were cracked - and picked up quite a bit of knowledge on the setup and use of a bandsaw mill; however, this looks way easier - especially since you can move the chainsaw mill to the logs.
"I've never had an original thought in my entire life."
I came to that realisation in my late teens, and it was reaffirmed in my twenties when someone told me "You're lucky if in your entire life, you have one single original thought.", which made me feel a little bit better about it, but not a whole lot.
It's best not to let others identify who you are. That's your job. Btw, those people were rude and had zero good intentions.
@@leannkennedy6568 No they weren't. And they were correct.
@@jimmyb1451 ok, sorry to interfere. Have a great day!!
Thanks YT, for suggesting a video about a guy thanking you for suggesting a video...but seriously thanks for the video, I have logs and this looks perfect.
I like this guy’s dry humor. 😆👌🏼
With a new pup coming soon, you will want to insulate the floor for them. Erik Grankvist used nothing but his wood shavings and sawdust for his floor. Decent R value and its F - R Double EE. You are making tons of sawdust. Your pup will thank you if you use it to keep their tush warm 🐶
I never had an original thought in my life either. Ambition solves all kinds of problems...
knocked out my first three boards today using this setup, thanks for the inspo
Running a stihl ms661c-m on a 36" Granburg mill and bar....square ground full skip chain and it blows through oak. Always enjoy the videos worm...we live similar lives
Bad ass!
I owned two Lucas mills for about 20 years.
Sold them to a neighbor.
Just felled a 40” DBH sugar pine and I May end up blowing the dust off of and using the Alaska mill for the first time in many years.
Good inspiration from you.
I used to think you were nuts but now I realize your true genius
Right tools for the right job. Great class!
First time viewer, therefore I’M GLAD you demonstrated using the winch👏👏👍.
Also, my first time reviewing a chainsaw mill, and was extremely impressed with all the information, filming, editing, etc. you put into it. I am an instant fan and have to check your other videos.👍👍👍
I have a still 661 mag with a 36" mill and I'm making all my timber frame lumber out of pine. Knotty pine 2x6 t&g for interior panel and roof deck. I'm milling crazy maple crotch sections for flooring and counter tops. It will take 2 years to get all the lumber but it will save me 100k$
I have the same 261 as Ryan but need something bigger. I'm thinking 500i just for the power to weight.
@@RobertJLessard The Stihl dealer, recommended the 661 as it has more torque vs the 500i. Thats what i went with the 661, i know there about the same price but i took the dealers advise.
Nice video Ryan, thanks! My approach to building a shower at the cabin was to make it a sauna. I set a pot of water on the sauna stove and while it is warming I can sit and enjoy the warmth of the sauna. Once the water has reached the temperature I want I pour it in a pump-up garden sprayer and use that to shower. (The pump sprayer has never been used for chemicals. It also has a longer hose and a spray nozzle that is better suited to showering than the wand-nozzle it came with.)
Thx for your tip😊
Sauna is a great way. They don't need to be complicated at all. I use the saunas built by my great-grandfathers in Michigan. I prefer them in the winter over summer. They're a hundred years old. If you build a two-room building, then you have a nice changing room not as hot as the bathing room.
I stumbled on this channel while searching on building atv bridges. So I first watched episode #39. I normally make my atv bridges out of regular lumber so this methodology got me interested enough to look into your channel. I must say after one week of binge watching all of your content, I finally got through all of your episodes. I look forward to watching your new content as you continue to produce it.
Impressive simplicity of less is way more!
appreciate your natural humility...
Living in Alaska off the grid, I bought a 3 gallon garden sprayer and used a barbed fitting to attach a sink sprayer to it. Then 1 gallon of hot water and 2 gallons of cold water then pump it up and you’ve got a shower with pressure. Instead of using a bucket or sun shower.
Great video. I’ve done a little bit of milling on a homemade chainsaw mill… what helped me a lot was gravity. One side of the log is always 6-12” lower than the other. Thanks for the tips.
One more f , if not the best video you've done. Immensely enjoyable and you've answered a lot of the questions I've had about chainsaw milling.
So much good info in this vid. I've run into all of these issues milling & this vid can really assist anyone looking to do so.
If anybody is wondering, I mill a lot of hardwood (oak and maple mostly) and started out with just about the same setup. A 50cc saw will get the job done, but it really isn't enough saw. I recently upgraded to a 98cc pro saw (more than I'll ever need and not just for milling) and it mills hardwood so much better. Every couple boards I touch the chain up with a file and I can mill 2-3 times more wood in half the time
What saw did you get?
Literally no reason to cut oak.
Daniel, I hate it when people use oak for firewood!!!
They take so long to grow. My belief is to make something lasting out of them if they are cut.......
However, sometimes they do need to come down. Whether they are about to fall on someones house or trees do fall on their own so cutting is fine.
But again, at least make something of value rather than using it for firewood!
I copied your rail and bracket setup a while back. Worked great. I did make a wider set of plates to use when milling some 30” diameter oak. 36” Granberg mill and a Holzfforma 660 pro saw with 36” bar. I think the pate and rail setup can’t be beat for heavy duty and speed of setup.
31:29 Those caramels are amazing. I was literally eating one while I saw that, LOL.
I've been teetering back and forth on chainsaw mill vs bandsaw mill. After this video, I think I'll save myself some money and go with the chainsaw mill. Cheaper start-up and I can always get a bandsaw if I REALLY like it. Really enjoy this channel - keep up the great work!
I did just this about 2 years ago. Just went to a full on bandmill from frontier/norwood. Its hard on saws and is very time consuming to use a chainsaw
For someone who is milling on the occasion, I can attest to how handy and convenient it is to be able to chainsaw mill. I only have experience in freehand chainsaw milling (I just spend the time to plane my work) but my goodness, what a total blast!
Nothing beats the ability of being able to mill basically anywhere on the fly.
Run a milling chain if your worried about the load on your saws.
Don't listen to what everyone says about what you can and can't do with your saw. Someone told me my saw (ms 261) wouldn't be good to slab out logs.
Here I am a year and some odd into my saw ownership, running it as I intend to use it since day one. Havnt had ONE issue. Not even so much as a thrown chain. Nothing. And I've milled quite the collection of slabs!
Oh man, you got me! This video ROCKS!
I was really thinking I “need” a bandsaw mill for my projects but I am going to go this route. MANY THANKS for ALL that you shared!
I thought about a band mill too. Until like he said how do I move the logs to the mill. I was only doing logs on my property that's not even an acre.
@@beebob1279 look, one can choose to buy only the bare minimum, cheaper tools and then do everything the most difficult and slow way on the cheap... so one may think. Or one can choose to equip themselves properly, which saves time, which saves money, which allows one to continue to invest more $ into their equipment making the entire operation easier and more productive, while providing an opportunity to make a little side cash w/ said equipment.
I ran an Alaskan for the big logs only; over 32" wide. it's been gathering dust since that first year. I now butterfly large logs vertically, standing in top. Sure, there's such more to it, but that's the gist. Honestly can't stand the Alaskan mill. so much effort and so slow. My old mentor always said, "work smart, not hard."
It'd be more cost effective to hire a portable band saw to mill up your logs, rather than spend all that time using an alaskan mill.
So, I own a manual push band saw (Timbery M280 with a 25HP engine, it was under $10,000) and ran the operation on the cheap before I got serious and invested in a skid steer and set up the operation as it should be; milling shed to mill outta the sun, a lumber shed, storage shed for skid steer and operation tools.
I just could not do that with an alaskan mill w/o losing my mind.
the hard way:
I would either buy a dump truck load of logs or fall trees on the property. Either way, I had a log storage, hence my need t excavate a "and" for the operation. .
I use to drag my logs w/ the truck, from log pile to mill. I installed two 4x6's w/ tapered end to create a log loading ramp, Running a single carriage bolt thru each one which was connected to the angle iron tabs I welded onto bottom of the band saw rails. I used a boat winch ($15 used) to roll logs up the ramps and onto mill. I did this for several years, it worked. AND... It eventually drained me, b/c of all the time it took just to move and load one log, then load up the lumber slabs and move and stack them, by hand. I learned by doing it the hard way. Looking back, I now cringe.
easy way:
I then bought an old skid steer. I shopped for a machine that I could use for many other things. I found a used machine with 4 attachments that I could use to work my land; back hoe, auger, forks, bucket... and I bought a used grapple bucket.
The entire operation changed at this point. Not only have I excavated a new log milling area/pad on my hillside sloped property, I have excavated a road down to the lower forty, cut trees down there, hauled the logs up the road, and used the grapple bucket to load all the slash into the dump trailer (which I also make money w/ by hauling customer's slash/trash! There is NOTHING like the feeling of rolling up to the dump with a huge dumper load of slash or trash; dumping and rolling out within 5minutes). I have built 5 huge retaining walls with 200+ massive boulders (3-4 diameter). I use the auger to dig fence holes, for milled fence posts, both for myself and customers. It's all a tax write off now, b/c I bought all of it under my LLC.
I guess my point; it may serve one to think a few years down the road, what one might consider doing elsewhere on the property or with your land/home, rather than just thinking of the immediate project at hand. The band saw changed my life. and then it changed again once I got the skid steer. I now have the equipment to do all kinds of things I would not have dreamed of... including snow plowing my property and a few neighbors (making more money off the skid steer and knowing I can always move any amount of snow that drops here; typically 10-15' per winter)
it might sound more complicated, but it has been a progressive journey for me. I'm still remodeling the old cabin, using my band saw and wood/work shop (which I also built using my milled lumber). With the wood shop equip. and I can make T&G, and mill anything for my needs. This year the back deck get refurbished with a roof over the entire deck. I pay for hardware only. I use the skid steer to move lumber to that area. I set beams with it.
Looking around the compound I can point to all kinds of projects that I could not have done without a machine.
I just think it's silly to choose a cheaper tool that work slowly, is far less accurate and has no value towards making money on the side.
But hey, we all enjoy doing things the way WE like to do things
For some of us, we have fun regardless. I have always thought to keep in mind there might be an easier way that will offer more.
@@dgodrummer8110 You type a lot.
spending 10,000 for a band mill isn't so smart for 800 board feet of cherry.
@@beebob1279 ok then, have fun.
@@dgodrummer8110 I'm done and it was a challenge. But I have it and it's air drying. Planning on making some flooring with it, cabinets, and a few for gun stock while I build flintlock rifles.
The rest? Not sure what to do with it. I'll store it until I need it
It’s guys like you!!🙏💪 Keen observation, never having had an original thought. It’s all good. No one has had one, because they originate from somewhere other than ourselves. Hope you got your setup going. Michigan is a beautiful place with wonderful people. Cheers!!
The quality of your video has been enhanced by candor, experienced knowledge, and artistic patience, covering the full spectrum of possibilities; such as proper chain maintenance. Thank you!❤
Well worth it! What an amazing set up, this is the first time I have watched your channel. Very impressive! Loved all the details you covered. Great job
I really like your chainsaw milling setup. It does the job, you enjoy doing it, what would be a problem. Thanks for going over all of it. Lots of questions answered. Thumbs Up!
I'm a complete noob, about to embark on using trees to build furniture and ultimately a log structure. Feeling overwhelmed yet inspired after watching your video. NEW SUBSCRIBER 🎉
...This is the 1st video of yours that ive come across, and it couldnt have been a more perfect subject! I needed to be introduced to this simple way of milling my own lumber, this is amazing. Many project ideas have been hindered due to the high cost of materials, and now I can mill them myself, thank you so so much for sharing your knowledge.
I don’t know how I ever came across this video, but I’m sure glad I did. What a great video. So glad you decided to just ramble on instead of just giving the specs of making this mill. There’s a lot of knowledge packed into it! I’m definitely a follower now! 😊
Great tutorial on the hows and whys of your mill setup, Thanx for sharing. You answered questions I didn't even have!!! Stay safe.
Thanks for the effort and tons of information, Ryan. My first search to alaskan chainsaw mill and you appeared. Your videos are so easy going and nicely unexcited😀Thanks from Southern-Germany to the Michigan forests
Make you a drip oiler for your bar on the mill you can use a pop bottle with a length 1/4' hose and a needle for pumping a football up for the tip to direct it right on your chain will help alot with chain and bar life you can use used motor oil for it when it's cold out
Used to mill logs for my gold mine back in 2006-2010 I miss those days. Doug firs where my main trees and loved every minute of it.
I'm really impressed with your thought process and how you've over come your mistakes. They seem to not bother you, just motivates you into doing it another, and probably a better way. Kudos to you for taking on something that many many people would not even consider. I also agree with you about the high cost of lumber, it's ridiculous. Enjoy your videos very much my friend. Steve
Great information. I have my Chainsaw mill equipment coming and I was just planning to use an extension ladder as my guide for the first cut, however After seeing this I will replicate your setup instead. Thank you!
Great video! Built this same setup a few years ago and have milled lots of walnut. Used some surplus 1-7/8" strut for the bars and tilted my log table to make it a little easer cutting.
PS. My old 1980 Homelite XL12 just keeps going.
Great video. Answered lots of questions I had about the process. Even created snow diagrams to help explain concepts.
Excellent rundown of your setup. You did a good job of explaining this in full layman's terms. I'm gonna try. Thanks again!
Excellent video. I've been milling for about 11 years, always used an extension ladder for the initial cut. Been looking at this setup with the plates for a while now. I think you just sold me on that idea. Thanks buddy. You covered a lot of good points on milling in this video. Things I also found out through trial and error. It sure is fun though. MS 460, 32" bar, Alaskan Mark III.
I remodel cabins and this setup would be perfect. Thanks for the info and expertise
Thank you for a really useful and inspiring lesson in practical wood milling. I think the bar system is really versatile and practical. It is really enjoyable being out “wood landing”, is’int it! Greetings from the Emerald Isle.
Thumbs up brother, So many great tips and content.
Great to learn from your trial and error and pass on the knowledge so others can avoid problems.
Solid setup, clear speaking and good audio,, not rambling, tons of great info packed into the video.
Too many TH-cam videos try to stretch out something and go on an on. You ROCK bro, keep up the great work and it's always great to see people who enjoy the great outdoors.✅✅✅
What an enjoyable and extremely helpful adventure you guided me on. Thank you so much. This is the one video that has now convinced me that I can do this, and surely enjoy the journey much like you have. You covered the details and concerns I had perfectly. Cheers... 8^)
I just found your channel. First video I've watched. I'm glad you demonstrated the use of your winch come-along. Thank you for sharing!
For cleaning your chains if you are where power isn’t a problem you can get an old computer fan ( usually about 6” x6” and high speed ) break a piece of one of the blades off and attach it to any container ( an old style metal coffee can is what I use ) fill it with whatever solvent you want put your chain in it and turn it on over night. The vibration will help more than you would think. I’ve never tried it with chains but I used to work on industrial printers and I worked great with ink and those little fans are a dime a dozen. People get tired of their computers microwaves or whatever and throw them in the dump. I appreciate your tutorial I’m looking around at mills right now and that was very helpful. You have a blessed day
I paid $1000 for an old Harbor Freight Band-saw mill. Makes this chainsaw setup look like a PIA. I just did five 14' long logs today, two 22", and three 18". Ended up with a lift-worth of boards, all perfectly cut. I can't imagine using a chainsaw mill unless there was no way to get a regular mill to my location.
I was on the fence as the normal saw mills look like they can be a pain in the ass too and they cost $2,500 at Harbor Freight. I didn't consider a used one, but will be on the lookout now. I have 17 of my 20 acres forested with hardwoods in Northern Virginia so I should be able to drag them with a pickup truck where they need to go.
We have a chop and split set up for firewood with a HUGE chainsaw and the amount of sawdust was considerable. I was going to take some for the gardens and Chicken coop but the good brother reminded me the stuff was toxic waste, dirty with Bar Oil.
Good luck.
That was a awesome informative milling video!!! You answered most of my questions! I seen a few others but yours is the best out there!!
Thank you. This is one of the best best TH-cam videos I've ever watched. This was like a Master Level Course on chainsaw milling. I really feel like I learned a lot and will avoid a lot of trial and error once I purchase a mill. Now I will go back and watch your other videos. Keep up the good work.
Same...
Great job of explaining the details that a no experience guy like me would need to know. Wisdom born of pain. We'll done. Good luck. Have a great life out there!
Great video. Great channel. Gotta say, you are a natural in front of the camera and a stellar editor.
So I have been dragging my feet on building my saw mill happened across your video and I have to say the information was great definitely answered the question that kept me from building my mill. Started building it after seeing it and going tomorrow to get final supplies. No more spending money on wood. The selection at hardwood stores are less than to be desired anyway. Finally going to be able to finish projects I was waiting on because the bank account was low. Thanks I will check out more of your videos keep up the good work. 👍
Diy milling makes more sense than now than ever, cedar has got to be a very user friendly wood. Good setup.
Thank you!
Gray coverage!
Another excellent video!! I really appreciate how in depth you went and all your advice from experience! I'm hoping to finally get started milling this spring, and your insight is very valuable.
i love your shows. you crack me up and i learn stuff from every show. ive been living in the Au Sable State Forest for 26 years in a trailer but now i have so many ash trees on the ground it would be a crime not to start making lumber. thanx fer the help.
Very informative. Thank you for sharing this and taking the time to explain everything. I’ve been wanting a chainsaw mill.
Thanks for taking the time to document your process, very much appreciated.
Have you tried the square filing I've noticed that my chains seems to hold the edge a whole lot better with the square grind usually the beak of The cutting edge gets a micro bend in it and acts like the end of a ski even though it feel pretty Sharp it just won't cut very good .. I've heard a couple of these guys that Mill say they completely remove the drags for ripping and some file the rakers down a bit more for ripping probably around .040" or 10° with the protractor ..that is if your little saw will pull it .. I've got a little MS 362 in my arsenal little thing is a beast that's my favorite do everything saw I do like my 660's tho 👍 I've got an 880 that thing is just too heavy and doesn't seem to have much more power than the 660's matter of fact my ported 660's probably edge it out a bit and they're much lighter although that little bit of extra torque from that big 880 thumper of a piston may shine a little bit more in the monster wood
Excellent content and subject material. I subscribed today. Looking forward to future projects this season.
First time viewer but now because of this video a new subscriber! Awesome video I really enjoyed it... you did a great job of explaining how the mill works. I’m extremely impressed with all the information and knowledge you packed into this video. I appreciate all the work you put in... it’s a lot of work that goes into the filming and editing. Looking forward to more of you informative video’s.
Wow, very informative. I have a log that I want to mill and didn't know how I would start the first cut. I've never milled before so I was scratching my head. I too have 95% cedar on my 10 acre property here in Texas. I want to cut out some beams for decorative purposes for a cabin I'm building. I like your setup and appreciate your tips. Thanks!
Great Video and great presentation. No frills, just the facts. Thank you. Looking forward to more quality content like this.
Those plates you made. You need to market that idea. Those are amazingly useful. The best milling endplates I've seen, for sure
This is my first time to your channel. Great content and information. My son and I cut a lot of wood for heating and we have been wanting to do some milling as well. Thanks for sharing!!
Great video! Nice to see that it is possible to use a “smaller” (totally normal size in Sweden) chainsaw. Looking for info on milling some framing for an addition on the house and this video was suggested. Good for me and you got another subscriber! Take care! Best regards Nils
That's some nice lumber right there, and all cut with a chainsaw. Bravo.
man im never ever going to mill logs into lumber lol . but its fun watching you do it lol . work safe buddy
The “happy hat” 😮😂
Very nice setup you have there I have never seen one so nicely built and also easy to use
Love watching a sharp chain cut through any log.
Great video, you do an excellent job explaining your process. Thanks.
Thank you for going in depth on this. I've had my mill for a while now and haven't used it. I would have made a few mistakes right away had I not watched this, thank you.
Good morning buddy, how are ya? This was a truly awesome video!!! You are a great teacher. I to have used the Granberg sawmill, it works great for logs too large for my bandsaw mill. I cut mostly redwood(very soft) and Sycamore ( much harder) into 3 inch slabs. Chainsaw milling is hard on the body like you said, the winch really help! Thanks for the videos, I always look forward to them. Take care and God bless you and yours.
Great video, thanks for the tips. Going to start my milling journey with your teachings and wonder if ill ever leave the woods also lol
This is the first video of yours I've seen and it was great! I'm just purchasing my first chainsaw mill and the information and tips you provided were awesome. Thanks for making these videos, cheers and be safe bro!