Thank you soooooo much for this video! It helped me to fix a completely different problem (a cockroach stuck in the printer fan) but it showed how I can run a fan check. Thank you again!
The printer was a bit complicated to hook up th-cam.com/users/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 but it does the job very efficiently. I like the ink wells versus the ink cartages that cost an arm and a leg. It prints quickly and the quality is excellent. It shuts off when not in use, so you have to remember to turn it on. Overall, it exceeds my expectations. I'll update my review in a couple of months.
This menu works on my HL-L2380DW ... I'm trying to find a way to trigger a full factory reset from this menu. My touch screen because unresponsive right as I was exiting the wifi ip settings. Doubt the screen broke right then, figure clearing everything might help. I tired both EEPROM options. No luck.
Can you reset the toner counter in the Maintenance Mode on a MFC-L9570CDW? We can't find a regular menu to reset Toner. The machine will not reset the toner counter when we replace the toner cartridges.
I've just been given a brother MFC-L3750cdw printer that has stopped due to the use of a non genuine black cartridge. Will the reset methods for the fuser fix this?
Try this: turn off the printer and open the front cover. Turn the printer on. Press the “1” button to display the Reset menu. Select the toner you want to reset. The printer will display “Accepted“.
So mine is stuck in maintenance mode. Press 99 it acts like it will start up then back to maintenance mode. Can print out information sheets in maintenance mode to all feed fusing etc are working.
Mfc-L9570cdw A tech replaced the main board. I’m Not sure if they put it in maintenance mode or if when the board replaced it went into maintenance mode. Pressing 99 reboots and back to maintenance mode. In that mode I can copy from scanner internal print etc. Donna hone functions but can get it to the main icon screen. I Downloaded fw update tool. Connected with USB and it connected to printer and updated fw. But no change. I’ve also tried putting it into shipping mode etc trying to factory reset it. I’m digging through manuals at the moment but info isn’t clear on stuck in maintenance mode…
@@regularguyfixes3142 Try to enter a random maintenance code 09, 25, 71 or similar. it could unblock the printer, and sometimes when a maintenance mode function is completed, the machine returns to the ready state automatically.
I have a DCP-L3550CDW printer. I need to do a factory reset in service mode as I have locked reset options via touchscreen. Can I do it in maintenance mode? How to enter this mode on this printer model?
Thanks, I have a MFC 9570. The replace toner message came up. I held the home button down, then pressed the 4th (blank) box then *2864, but the maintenance message never appeared. all I got was a Replace Toner cartridge message. So... any suggestions? Thanks
It could be caused by several things. a Connector on the main motor flat cable, a connector on the power supply or a damaged power supply, a damaged fuser gear, the main motor, the fuser unit, the main board
Removing the electrical cable for an hour does not solve the problem? It depends on which printer do you have, it could be the encoder wheel, or a paper sensor
@@viandant5 il tamburo e il toner l'ho cambiato, quindi dato che esce bianco supponevo fosse il gruppo laser, l'unica e provare a sostituirlo a sto punto
Ciao, grazie della guida utilissima! Una domanda ho una MFC-L3750CDW, mi segnala di cambiare il toner anche se è pieno, avrà fatto 20 fogli (toner non orginali), c'è modo di forzarla ad andare avanti? O altrimenti, conosci un modo per farla stampare solo in bianco e nero se finisce uno dei colori? Grazie
Can i turn on wifi from maintenance mode? My display is broken but printer is still good and i juat replaced the ink absorber and reset the flushing count but now cant get to connect to wifi bc display is cracked. Mfc-j6935dw
hen i change the language the Machin model changed from mfc-l 8650cdw to dcp-l8400cdn and the fax & wi fi has disappeared from lcd pls tell me what is the problem many thanks
@@viandant5 Hello, Brother MFC 8690CDW ==> if I press life parts => drum unit 'and hold on' the printer purposes to reset the belt unit which is just under drum unit and no way to change that (if i want to reset the belt by holding on belt it could work !) I tried to find on the net the code for this drum unit but did not find it => what I mean is to reset the drum unit in maintenance mode just like reseting the fuser unit code is 88
salve io ho stampante Brother MFC- J4420DW e vorrei fare allungare il tempo di pulizia testine in automatico attualmente e ogni 24 h . ce la possibilità?
Nel manuale non ho trovato niente e non ho manuali tecnici di questa macchina. Se andando in "Settings" e "maintenance" non si trova niente, non so come aiutarti
@@jjkoriginal5423 I don't even know which is your printer, I only know those 4 words you wrote. I said that often that problem is caused by the toner cartridge. the fuser is not related to the faded prints
This just saved me 400 bucks multiple times and the printer keeps going with no loss of print quality.
Thank you soooooo much for this video! It helped me to fix a completely different problem (a cockroach stuck in the printer fan) but it showed how I can run a fan check. Thank you again!
The printer was a bit complicated to hook up th-cam.com/users/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 but it does the job very efficiently. I like the ink wells versus the ink cartages that cost an arm and a leg. It prints quickly and the quality is excellent. It shuts off when not in use, so you have to remember to turn it on. Overall, it exceeds my expectations. I'll update my review in a couple of months.
This video was very helpful. Thank you!
Thank you so much. This helped A LOT..
Thank you, it's work 👍👍👍😉😉😉
Thank you a lot. For that model not much info how to get into the service menu. All the best to you!!!
This menu works on my HL-L2380DW ... I'm trying to find a way to trigger a full factory reset from this menu. My touch screen because unresponsive right as I was exiting the wifi ip settings. Doubt the screen broke right then, figure clearing everything might help. I tired both EEPROM options. No luck.
Very helpful. Thank you!
Can you reset the toner counter in the Maintenance Mode on a MFC-L9570CDW? We can't find a regular menu to reset Toner. The machine will not reset the toner counter when we replace the toner cartridges.
- Hold home button for 5 seconds
- touch the lowest black rectangle
- enter * 2 8 6 4
- enter 83
- touch some key on touch screen
- enter 99
many thanks great share! all the best.
Does this revert back to the shipped firmware after a reset?
Is it possible to print a configuration report before a factory reset?
Yes sure
Used worker switch function disable deep sleep on my MFC printer.
Hello, is there a way to reset the Printer counter on a MFC-L3770CDW ?
th-cam.com/video/J6lsUBu1TDg/w-d-xo.html
Bermanfaat joooooos❤
I've just been given a brother MFC-L3750cdw printer that has stopped due to the use of a non genuine black cartridge. Will the reset methods for the fuser fix this?
No, the reset method fot the fusers will not affect the toner cartridges
Can you suggest me how to change the usage number, page count? I am using Brother L5900DW
It's not possible to change the page count
how to reset the machine to the default value ? my mfc9330cdw adf missed scan 5mm the top part of the document. or any menu to move the adf scan area?
Try this, I think it's working in that model too
th-cam.com/video/WelBnLMUseg/w-d-xo.html
Can you reset the toner from here? My 9970cdw doesn't detect an open front cover, so I can't reset the toner, even with a new toner cartridge. Thanks.
Try this: turn off the printer and open the front cover.
Turn the printer on.
Press the “1” button to display the Reset menu.
Select the toner you want to reset. The printer will display “Accepted“.
So mine is stuck in maintenance mode. Press 99 it acts like it will start up then back to maintenance mode. Can print out information sheets in maintenance mode to all feed fusing etc are working.
WHich printer? Did you try to remove the electrical cable for 5-10 minutes?
Mfc-L9570cdw
A tech replaced the main board.
I’m Not sure if they put it in maintenance mode or if when the board replaced it went into maintenance mode. Pressing 99 reboots and back to maintenance mode. In that mode I can copy from scanner internal print etc. Donna hone functions but can get it to the main icon screen. I Downloaded fw update tool. Connected with USB and it connected to printer and updated fw. But no change. I’ve also tried putting it into shipping mode etc trying to factory reset it. I’m digging through manuals at the moment but info isn’t clear on stuck in maintenance mode…
@@regularguyfixes3142 Try to enter a random maintenance code 09, 25, 71 or similar. it could unblock the printer, and sometimes when a maintenance mode function is completed, the machine returns to the ready state automatically.
I have a DCP-L3550CDW printer. I need to do a factory reset in service mode as I have locked reset options via touchscreen. Can I do it in maintenance mode? How to enter this mode on this printer model?
I think this method works
Thanks, I have a MFC 9570. The replace toner message came up. I held the home button down, then pressed the 4th (blank) box then *2864, but the maintenance message never appeared. all I got was a Replace Toner cartridge message. So... any suggestions? Thanks
Sometime you need to try several times
conseguiu acessar?
is there an option to reset the waste toner? i just cleaned the wasted toner box
which printer?
@@viandant5 Brother HL-L3230CDN
@@kadec100 I don't know the exact reset procedure. There is a lever but you have to clean the roller inside the waste box too
Please do a video on kyocera 5521 maintenance mode. Thank you very much for this 🇵🇭👍
Ok, when I have a kyocera in office I'll do ti
@@viandant5 thank you good sir. I am a big fan of your channel
@@ajr5032 Thank you!
Is there anyway to revert back to the shipped firmware?
I think you have to find the old firmare version and install it
Hi, thanks for the video. May I ask you what’s the language code for US (English)?
the display should show the names of country in their respective language
Thank you it was very helpfull, but on MFC-L3770CDW the printer continue to say ''Machine error 0201'', do you know why?
It could be caused by several things. a Connector on the main motor flat cable, a connector on the power supply or a damaged power supply, a damaged fuser gear, the main motor, the fuser unit, the main board
Do you know how to stop the printer from printing the scanner status page
Removing the electrical cable for an hour does not solve the problem? It depends on which printer do you have, it could be the encoder wheel, or a paper sensor
Ciao ho una L5500dn che stampa pagine bianche potrebbe essere il laser che non incide il tamburo? C'è un test da manutenzione o bisogna smontare?
Potrebbero essere tante cose, ad esempio il tamburo o la piastra base. Non c'è un test che dica cosa non funziona
@@viandant5 il tamburo e il toner l'ho cambiato, quindi dato che esce bianco supponevo fosse il gruppo laser, l'unica e provare a sostituirlo a sto punto
Può essere anche la piastra base@@FISHINGHACK
Ciao, grazie della guida utilissima!
Una domanda ho una MFC-L3750CDW, mi segnala di cambiare il toner anche se è pieno, avrà fatto 20 fogli (toner non orginali), c'è modo di forzarla ad andare avanti?
O altrimenti, conosci un modo per farla stampare solo in bianco e nero se finisce uno dei colori?
Grazie
Si possono resettare i contatori del toner
th-cam.com/video/nAxe06Lo38A/w-d-xo.html
2380dw test printing not works, but maintenance mode can print the sample page, what is wrong with it? Copy works too. Thanks
IS it the only problem? does the printer receive datas from PC?
@@viandant5 can not print through usb/wifi too, but scanner works too.
@@johnwagons4707 is the firmware installed?
@@viandant5 it said main version k sub2 version G is that right?
@@viandant5 I tried to update firmware online failed, seems forever at state of receive data.
Hi, someone has set a function lock on ours and we can't get it off, is there a code for full factory reset at all?
Which printer?
I've got same problem. On MFC-L2740DW
@@viandant5 MFC-J6520DW
@@viandant5 Thank you, apologies for the delay we are in and out of hospital a lot at the moment, my wife is extremely unwell.
@@TheSilentStar You have to contact the Brother customer service in your country, I think there is no other way
Can I reset PF KIT 1 from here? I see the option to reset it in menu but I am not sure how I tell it to reset it.
YEs, you can reset it in the same way you reset the fuser unit
@@viandant5 Thank you, you have saved me hundreds of USD in repairs. Thank you so very much, really.
Hi. I need help. I changed region code in MFC3770 and now is 3750. Do You maybe know what is correct region code for 3770?
What do you mean? Did you change the driver? Brother MFC 3770 remains a 3770, the region code mean you can only use a cartridge of that region
@@viandant5 No, my friend change me region in the Maitenance in 77 position to change language but it was not necesery.
@@installationenDE I don't know the region code for that printer
Hi my machine is mfc 9340cdw, when I checked machine error code shows: MACHINE ERR 4B04, what is meaning and how to clear it? Thanks
Are you sure this is the error code? I never hear it
Can i turn on wifi from maintenance mode? My display is broken but printer is still good and i juat replaced the ink absorber and reset the flushing count but now cant get to connect to wifi bc display is cracked. Mfc-j6935dw
this method only works in laser rprinters
How I make the printer brother MFC-L9550CDW read a new toner
th-cam.com/video/QG5WgHgy4Mk/w-d-xo.html
I tried entering Maintenance mode on my MFC=J895DW. I got as far as entering *, 2,8,6,4 and I got the message, "Cannot Detect." Can you help?
This method only works on laser printers
How can I reset page counters? (Printer statistics)
I don't know any method to reset that counter
hen i change the language the Machin model changed from mfc-l 8650cdw to dcp-l8400cdn and the fax & wi fi has disappeared from lcd pls tell me what is the problem many thanks
I don't know, probably you have changed a setting somewhere. Reset the machine and return to the initial setting
How about fuji m375z
Sorry I have no manuals of that machine
how about fuji m375z i cant to maintenance mode huhu
Sorry I have no manuals for that machine
Please, how to reset the drum unit change message ?
which printer?
@@viandant5 Hello, Brother MFC 8690CDW ==> if I press life parts => drum unit 'and hold on' the printer purposes to reset the belt unit which is just under drum unit and no way to change that (if i want to reset the belt by holding on belt it could work !)
I tried to find on the net the code for this drum unit but did not find it => what I mean is to reset the drum unit in maintenance mode just like reseting the fuser unit code is 88
@@didiermeral6020 Settings - all settings - info - life parts - drum - press drum until the display changes - press yes
In my brother MFC-L5700DW , in display there no network icon show, no wifi icon, how to update
You have to enter maintenance mode. Watch the video
Thanks boss
BIG MASTER
how to replace toner solution l5600dn
Remove the drum unit, remove the toner, install the new toner
@@viandant5 sorry that not what i mean
but iam done with it already
thank you for the attention
salve io ho stampante Brother MFC- J4420DW e vorrei fare allungare il tempo di pulizia testine in automatico attualmente e ogni 24 h .
ce la possibilità?
Nel manuale non ho trovato niente e non ho manuali tecnici di questa macchina. Se andando in "Settings" e "maintenance" non si trova niente, non so come aiutarti
Brother prints are faded... Please help.
the main culprit is the toner cartridge
@@viandant5 How do you troubleshoot that?
Can also see fuser is at 48 percent
@@jjkoriginal5423 I don't even know which is your printer, I only know those 4 words you wrote. I said that often that problem is caused by the toner cartridge. the fuser is not related to the faded prints
@@viandant5 my printer is brother MFC- L5755DW
Grazie mille
Thank you
sreen black..sensor problem