This is for anyone who didn't know already. if you're planning on using this on an OLED Screen dont bother once an OLED Screen has burned in it won't come out because of the way the display works. This works for LCD and LED displays becuase there's a full backlight providing the brightness to the entire screen and then the individual RGB pixels open and close to let the proper amount of colour through the screen whereas an OLED or AMOLED Screen the light comes from the seperate diodes (so each individual pixel is it's own light source) and when you get burn in on that type of display it's like comparing a new light bulb against an old one the older one won't be as bright. Anyway I hope that sort of explains why you can't reverse burn in for an OLED Screen :)
It could work. Take a 10 year old and a 20 year old person. The difference is huge, buh when they are 70 and 80, you can barely tell them apart. Running this video on max brightness will sort of make the whole screen worn, reducing the differences between the burn-in and the rest.
It actually fixed my screen burn on my Samsung LED monitor thank you so much , I played the video overnight about 7 hours. Unfortunately it did not fixed the black horizontal line on the screen .
My S9+... 1 year of use... screen saver always during recharging, but the screen started to burn after 3 or 4 months use. I've been trying many screens fixes but, it doesn't work...
@@eduardonascentes I had a galaxy s8 with the same problem. I turned brightness down and disabled the nav buttons on the bottom to prevent it on its replacement. I also tried fixing my own issue with this video. It didn't help me either. Sorry about the loss :(
How about on cellphones? Does this works rizz? Coz my phones starts flickering lines right now and it haved a small circle on the bottom left on my cp..
Is there anyway to fix ghost pixles or sum? I was on tiktok and I existed out and the foryou page image is burned into my screen. Anyway to help get it out?
Dude stop misleading people into thinking this can fix broken pixels, you can't its impossible. THIS WILL ONLY FIX SCREEN BURNS!!!! For the people trying to fix broken pixels, you can check your warranty or try and get it replaced by a professional!
@@WoopyLoops Wrong! You’re narrowing the term “broken" to mean only that narrow definition of what you think it means as in "irreparably broken" and you’re confusing that everyone calls "broken pixels" with DEAD pixels or (Dark Dot defects). Go look at the definition of “Broken" in Merriam-Webster’s dictionary. Broken, as in not working anymore does not have to mean broken beyond repair or vaporized permanently by a laser, or shattering into pieces but simply not functioning anymore. Just like a broken down car on the side of the road could be fixed, if the reason it was broken down is the battery cable fell off. I do a bunch of SMD reflow work with a digital microscope and have fixed many of what you claim can’t be fixed but I’ve also done it without tearing it apart. He was referencing broken or stuck LCD pixels as in "substates" (phases) nematic and smectic“atoms packed in a neat, regular arrangement called a crystal (or crystalline lattice) that need to be brought back in a flowable state. Even some black pixels as in the (Dark Dot defect) can be brought back to life. Why? A dark dot defect is “usually" caused by a transistor in the transparent electrode layer that is stuck "on" for TN panels or "off" for IPS, MVA, and PVA panels. I say “usually" as a stuck transistor does not mean it’s burned out. There are times when the layers have lost contact. Sometimes heat, pressure, light, laser bombardment or even a degaussing coil has brought back into contact what was “assumed" as a bad transistor in an LCD panel. What you’re doing is being a semantic simpleton and the OP didn’t have room in the title to break down the three main subtypes of ISO 13406-2 defects. Type 1 = a hot pixel (always on, being colour white) Type 2 = a dead pixel (always off, usually meaning black but can be white in some types of panels) Type 3 = a stuck pixel (one or more sub-pixels (red, blue or green) are always on or always off)
if you have black circle on the oled/led panel they are dead pixals you can fix them pus the phone flicking mean the screen is dying. the scre will do one of to things fully flicker off or the black spot will spread. best thing to do is make sure things are backed up and get a replacement (which cost to much) or buy a new phone
It depends on the cause of the issue. Everyone in this comment section is discussing this like it's one single issue with a single cause. But there can be various causes that lead to the same basic "burn-in" issue. At its core, it can balance the wear rate of the pixels, and it can 'even out' the brightness/contrast/vibrance for all pixels. It may not be able to fix a burn-in, but it might improve it, and it's a good thing to refer to if you take it in to a repair shop.
HAAHA! I had a small dark spot on my brand spanking new LG 75qled85, and after running this for just 5 minutes i made HUGE dark outline splotches of the inside electronics.
Does absolutely nothing. Tried this for over 24 hours on my phone, which only has mild screen burn. Made absolutely no difference. This are posted just to get watch hours for the channel
Tacoma oh we have a FOX New Trump sheep 🐑 I see. Guess what chump. It went away once I did the tv’s retention scan option I didn’t know existed prior. Feel dumb now huh?
I HOPE THIS WILL WORK. Today I had no sleep at all and I was on my computer but then I went on phone but I forgot to turn off my pc and monitor when it was 8 AM I felt tired and dizzy so I went to sleep for a few hours but my pc was still on. And now stuff is getting burnt on my screen, hooray! Also I have a really old monitor lol
No ads, what a legend
Sus
How do you know are you just sitting there watching for 10 hours?!
Thanks this actually fixed my issue with a monitor I just bought and didn't want to go thru the effort of boxing everything up to return it
This is for anyone who didn't know already. if you're planning on using this on an OLED Screen dont bother once an OLED Screen has burned in it won't come out because of the way the display works. This works for LCD and LED displays becuase there's a full backlight providing the brightness to the entire screen and then the individual RGB pixels open and close to let the proper amount of colour through the screen whereas an OLED or AMOLED Screen the light comes from the seperate diodes (so each individual pixel is it's own light source) and when you get burn in on that type of display it's like comparing a new light bulb against an old one the older one won't be as bright. Anyway I hope that sort of explains why you can't reverse burn in for an OLED Screen :)
thank you
i return to my galaxy s2.
Not true it actually helped where my keyboard was burned in . On my s10
It could work. Take a 10 year old and a 20 year old person. The difference is huge, buh when they are 70 and 80, you can barely tell them apart.
Running this video on max brightness will sort of make the whole screen worn, reducing the differences between the burn-in and the rest.
@@stargazer8718 yeah and then the entire screen will lose quality to reduse the burn in effect
It actually fixed my screen burn on my Samsung LED monitor thank you so much , I played the video overnight about 7 hours.
Unfortunately it did not fixed the black horizontal line on the screen .
Just came back to say this fixed my samsung s10. Ty so much!!
Thais one fixes my Huawei P30 Pro burn in!
Should I try watching all the vid
It's a loop, so no.
Thank you!!!!! Unfortunately, for 2018 Canadian S9+, doesn't work... Samsung's garbage screen...
Doesn't work how? Doesn't fill the screen? You should be able to zoom the video such that it fills the whole display
My S9+... 1 year of use... screen saver always during recharging, but the screen started to burn after 3 or 4 months use. I've been trying many screens fixes but, it doesn't work...
@@eduardonascentes I had a galaxy s8 with the same problem. I turned brightness down and disabled the nav buttons on the bottom to prevent it on its replacement.
I also tried fixing my own issue with this video. It didn't help me either. Sorry about the loss :(
@@nuclearbastard like I told you, Samsung's garbage screens... thank you pal... 🤜🤛
@@eduardonascentes garbage?
thanks,its work but i need to run it for at least 2 days for my PC monitor..
How about on cellphones? Does this works rizz? Coz my phones starts flickering lines right now and it haved a small circle on the bottom left on my cp..
@@totit3609 i'm not sure for phone bro..didt try it yet..
toti_111 is it still like that?
7:53:20
Is there anyway to fix ghost pixles or sum? I was on tiktok and I existed out and the foryou page image is burned into my screen. Anyway to help get it out?
Wow! Thank you still need a new phone, but this helps a lot!
Hey how long did it took for you ?
Dude stop misleading people into thinking this can fix broken pixels, you can't its impossible.
THIS WILL ONLY FIX SCREEN BURNS!!!!
For the people trying to fix broken pixels, you can check your warranty or try and get it replaced by a professional!
You’re Clueless. I’ve fixed stuck pixels numerous times on many monitors. OLED Screen burn in retention is where this likely won’t work.
@@RadiationNetwork broken pixels can't be fixed my guy, if they are broken they are done, stuck pixels are fixable not broken ones (black pixels)
@@RadiationNetwork please Read before you comment
@@WoopyLoops Wrong! You’re narrowing the term “broken" to mean only that narrow definition of what you think it means as in "irreparably broken" and you’re confusing that everyone calls "broken pixels" with DEAD pixels or (Dark Dot defects). Go look at the definition of “Broken" in Merriam-Webster’s dictionary. Broken, as in not working anymore does not have to mean broken beyond repair or vaporized permanently by a laser, or shattering into pieces but simply not functioning anymore. Just like a broken down car on the side of the road could be fixed, if the reason it was broken down is the battery cable fell off. I do a bunch of SMD reflow work with a digital microscope and have fixed many of what you claim can’t be fixed but I’ve also done it without tearing it apart.
He was referencing broken or stuck LCD pixels as in "substates" (phases) nematic and smectic“atoms packed in a neat, regular arrangement called a crystal (or crystalline lattice) that need to be brought back in a flowable state.
Even some black pixels as in the (Dark Dot defect) can be brought back to life. Why? A dark dot defect is “usually" caused by a transistor in the transparent electrode layer that is stuck "on" for TN panels or "off" for IPS, MVA, and PVA panels. I say “usually" as a stuck transistor does not mean it’s burned out. There are times when the layers have lost contact. Sometimes heat, pressure, light, laser bombardment or even a degaussing coil has brought back into contact what was “assumed" as a bad transistor in an LCD panel.
What you’re doing is being a semantic simpleton and the OP didn’t have room in the title to break down the three main subtypes of ISO 13406-2 defects.
Type 1 = a hot pixel (always on, being colour white)
Type 2 = a dead pixel (always off, usually meaning black but can be white in some types of panels)
Type 3 = a stuck pixel (one or more sub-pixels (red, blue or green) are always on or always off)
Does it really work? Coz i have a small black cirlcle on my cp rightnow and my phone starts to flicker.. I hope u can help me..
if you have black circle on the oled/led panel they are dead pixals you can fix them pus the phone flicking mean the screen is dying. the scre will do one of to things fully flicker off or the black spot will spread. best thing to do is make sure things are backed up and get a replacement (which cost to much) or buy a new phone
It depends on the cause of the issue. Everyone in this comment section is discussing this like it's one single issue with a single cause. But there can be various causes that lead to the same basic "burn-in" issue.
At its core, it can balance the wear rate of the pixels, and it can 'even out' the brightness/contrast/vibrance for all pixels. It may not be able to fix a burn-in, but it might improve it, and it's a good thing to refer to if you take it in to a repair shop.
Can this work on my oneplus 7 pro amoled display?
Did he fix?
No i didn't tryed
Worked for me
HAAHA! I had a small dark spot on my brand spanking new LG 75qled85, and after running this for just 5 minutes i made HUGE dark outline splotches of the inside electronics.
7.53.20 is the best
7:53:20
@DARKLORD Gaming *Why what?*
@DARKLORD Gaming *idk ask the person who made the comment i was just making the timestamp usable*
@binod tharu hi
@@silverXI22 You're a legend :3
If you have an omoled screen then dont waste your time. It doesnt work, and will make it worse
This video can't make your screen "worse".
@@GraemeGunn it makes the screen 9:57:20 hours worse tho
Thanks to Allah is really working
Do I have to wait 10 hours??
Put it on before you go to sleep.
it works? i dont try this already but i ask to learn about this video
@Simo 3396 I have s8
How about GD apps? Did u know?
why
Thans doctor
About 33 minutes in you get hella dizzy
i tried every video but doesn't seem to work for my burnt pixel on my laptop
you cant fix broken pixels man.
Your better off checking your warranty or trying to replace the screen
Does absolutely nothing. Tried this for over 24 hours on my phone, which only has mild screen burn. Made absolutely no difference. This are posted just to get watch hours for the channel
Doesn’t work. Let it run overnight on my OLED. Still a retention/burn-in CNN “breaking news” logo.
Tacoma oh we have a FOX New Trump sheep 🐑 I see. Guess what chump. It went away once I did the tv’s retention scan option I didn’t know existed prior. Feel dumb now huh?
Tacoma yeah ain’t nobody read that brick wall of text nonsense you typing sheep.
It's probably best to leave this full screen right ?
Yes with highest quality preset
I HOPE THIS WILL WORK. Today I had no sleep at all and I was on my computer but then I went on phone but I forgot to turn off my pc and monitor when it was 8 AM I felt tired and dizzy so I went to sleep for a few hours but my pc was still on. And now stuff is getting burnt on my screen, hooray!
Also I have a really old monitor lol
Nice😎😎
I HOPE THIS VIDEO SAVE ME. I HAVE MORE 150 STUCK PIXELS!!! ;''''''''''(
Did it work?
Working or not?
It will never work..
on burnt pixels it won't
Does this work
try it
@@kristianvagenes8613 my monitor had a factory issue i got a replacement thanks for your reply anyways
P
Uwu