HK-450GT Flybarless Conversion - pt 3 - Installing The Servos FBL Rotor Head and Gyro
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- To complete this step you will need:
- Tarot zyx gyro, flybarless rotor-head and suitable cyclic servos (preferably digital and good quality)
- 1.5mm Allen Key (Hex key)
- Phillips #0 screwdriver
- Ball link Pliers
- Medium threadlock
- Cable ties
Optional Parts used:
- Align HS1074T Ball Links
- Hobbyking peel-n-stick foam tape (4mm) PRODUCT ID: ST-FOAM-DB
- CA glue and or hot melt glue (to complement the cable ties in wire tidying)
I’ve watched all of your ZYX videos, some several times, they have all proved to be excellent. Thanks to your guidance my Tarot 450 pro flew flawlessly first time. A real and meaningful contribution - Thank you!
Good spot! It is a little bent from a crash last summer. It is secure so I see no need to replace at the moment.
perfect vid! im looking forward to you other vids now that my zyx is on the way to me! thanks v much dude! :)
It's using a frsky djt module in the 9x not the stock turnigy module. The rx is Hobbyking
PRODUCT ID: V8R7-HV
Brilliant tutorial, thanks
Gutted for ya......looke all over the web and can't find one fer ya!
Great set of videos I copied every step problem I had was that I switched to Windows 10 and would not let me install usb adapter drives, so I switched back to Windows 7 and everything was fine and I am hoping that when I go back to Windows 10 the problem will not arise
I'm a little unfamiliar with the GT PRO, however I would suggest you look at a clone of the Futaba 9257 such as the rc711 3dpro ds9257mg or the Fitec FS9357D.
Simon nice job mate liked
*cough* I have 7 *cough* ;-) But seriously, I like having one at home and one at work for a crafty lunch-break flight!
Nice simmon good setup a
Thanks! Appreciated!
Turnigy "760LV-HV Dual Pulse Width Selectable Servo Tester" PRODUCT ID: T-ST_01 from Hobbyking
Thanks!
Thanks Mate. Be sure to read my latest post on the RCGroups ZYX thread. Little tale of woe I'm afraid wrt part 4! :-(
I just recently got into these helicopters and I have 3-450 helicopters that I can't get the blades to turn. I know what the controls do for the most part but the blades seem to start working when something happens that I'm not a wear of it think. if it doesn't make sense join my club because I don't know what I have done wrong other than buy these things. lol.
can you give me a few tips on trouble shooting what the issues could be .
problem is the blades not spinning only sometimes and I don't know what in gauges them.
thanks for your help..
A #16 keychain cam in webcam mode
Those are some bloody nice looking blades, where did you get them from?
i want to mount the zyx on my gyro mount (hk500 ) wich is flat in the frame but wires pointing towards the front. the diagrams in the set up do not give the option of wires pointing to the front ,, does it matter if it points the other way ,
Lol, I guess it's become the convention (rightly or wrongly).
Size of main shaft and main gear? (4B061)
Why do you have 2 helicoters?
Posh Git servo tester!
What is this "ZedYX" thing of which you speak??
Uh continunity please. Different sweater!!!
Pedantic?? You??? Stop it!
Uh, is that a "belt driven" tail.
Eggscelent viddy mate!
What is the name and model of the servo tester you are using @3:00
What receiver are you using with turnigy 9x transmitter?
8:57 Are you recording with web cam?
Hobbyking PRODUCT ID: HK-1193-2
Hey were u get the servo tester from and cost
The canpany screw holder look bent a
muita frescura ......