Homemade table saw mini with motor 775 - Creative Ideas With Motor DC
ฝัง
- เผยแพร่เมื่อ 29 ธ.ค. 2019
- #x_creative #motorDC
Homemade table saw mini with motor 775 - Creative Ideas With Motor DC
This is a video tutorial to make table saws from the motor 775
A table saw with a small size that makes you easy to move and work anywhere
It is used for sawing wood with a thickness of less than 15mm
💪💪💪💪💪
The items used:
- DC Motor 775, 12V, 18000rpm
- 775 motor base
- M10 saw blade holder, 5mm shaft
- Table saw blade 4 inch
- Power supply 12V, 20A
💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪
Subscribe for more video : bit.ly/2xB6lfL
💪💪💪💪💪💪💪💪
Thank you for watching!
Like, share, comment and subscribe if you enjoy it.
💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪
View more video in: bit.ly/39Var0A - วิทยาศาสตร์และเทคโนโลยี
The following details are needed from you:-
1. The MDF board you have used I need the dimensions,
2. The power supply Ampere and voltage.
After witnessing your video It makes me to try and fabricate one such for my hobby work. Good video.
One of the best video .... thanks bro
mandou bem 👏👌
Good idea
what is the measurements of the woods used in the project. Thank you
Wow, amazing
It is amazing, Brilliant Sir very easy and simple method to make saw like that.
thumbs up for your work.
Thanks Sir.
Love from Pakistan.
Nice👍👍👍
👌🏾👏👏
supper idea, i should make this. Thank you
th-cam.com/video/HARXpiT5Lls/w-d-xo.html
Boa noite amigo vc vende essa mesa de corte sim ou não por quanto
Vao
Can't use 7inchi blade
Looks very nice and cost effective.
But I have a question.
Can it cut properly natural wood like teak and ironwood planks?
cho e 5 cai dau chuc nhe
Saya juga menggunakan motor 775, mata pisau kenapa bergetar ya pada posisi rpm tinggi
I need some help please. I bought 12V 795 Motor and power suply is 12v 10A, and the motor does not have the power to cut a 2cm thick wood. What is the problem? please help me, thank you
795 has the power over 200W. You should use supply 12V 20A to use it the best way. Thanks
Hey bro,I have a/c motor which is used for sewing machine motor,and I want to use for this kind of project.But I cant understand without belt and pully it can harm to your motor,Can I use without belt and pully(direct drive from motor?)
Hi. The belt and pully be used to change torque of the motor. If torque of your motor enough high. You can use direct motor.
@@Spiderkoviper Can it cause for overload of motor when stuck? that can burn motor windings?
where can i buy a 18000rpm dynamo?
Boa noite amigo vc vende essa mesa de corte
Please info the power supply specification..
Info the power supply:
Input voltage : 220V
Output voltage : 12V - 20A
Wow..20A? Well..noted. thx
Motar m jo chuck lagaya hai vo kon sa hai
Le misure del legno non ci sono?
Can you ask me: How much Ah does that 12Vol beehive source have?
Current = 20A.
pourquoi ne pas donner de dimemssion des planche?
Modal habis berapa.bang
Online liya he kya saman
อออ
Box size please n bled lock name or from I buy blad lock.powe supply if I give 12vlt batter from out side that can I do.i m not engeener but common interested wiver.please reply for further subscrbtion.
The size of the box depends on the size of the wood you want to cut, regardless of the external or internal power source.
ask for a power supply purchase link please
Part details please
How much size box
I used the same motor but it cant even cut 8mm ply. Also it doesn't run on most of the adapters i have.
Runs fine only on 12v 2amp battery. I have tried 12v and 19v adapter, same result. Can you help extracting maximum power from it ?
i think u may need 12v with 5amp power.. but plz do some research on how much watt does that motor needed..
Try another adapter with high amperes, also there are 2 types of dc775 motors in market, one is with thin copper winding inside and other is this one in the video(approx 150 price difference in both)
Send me one pic
How many, w? that moder powder
th-cam.com/video/HARXpiT5Lls/w-d-xo.html
Simpell
where can i buy a 18000rpm dynamo?