A cunning plan there, Baldrick! We've added a couple of Jumper T-lite v2 radios lately - a 4-in-1 and the other in ELRS with that Lite module on the back. On 1.3.3.20 now. We'll probably wait for the next stable release before bothering to update since our FX9603 and QIDI 550 planes that run this protocol also have satellite ports and there are a couple of more interesting protocols currently in development by Pascal et al. eg Pinecone SG F22 I'm still hoping to add the QIDI flight board to 1 of our little foam chuckies when Quack visits allow.
Great video, its funny with these, I've seen some reviews of them flying quite fast yet others seem to be struggling like they're being held back and don't sound as balanced possibly, some say they have plenty of power whilst others say they are underpowered, I happen to have one that moves along with well. I also ran mine in for 20 minutes before using it. There's a guy who's already brushless converted one of these, looking forward to seeing the final outcome. Great video on binding to another transmitter 😁👍🏼
You're welcome! I feel mine is a little tail heavy. There's are video where a guy puts two screws under the rubber nose, I may try that although a heavier battery would be the way to go!! Have a great day!!
I have seen that video as well. I'm currently using the 2s 380 mah. If a larger millamp battery will fit in the compartment it maybe the way to go kill two birds with one stone including more flight time and a bit more thrust. Each motor is advertised with 50 grams thrust per motor at 100 gram fly weight if its balanced correctly and decent battery should be sufficiently powerful. Looking forward to trying a larger battery also 😁
Thanx for the vid I haven't thought ch 6 for gyro but flew on included controller so have it bound to TX16S need to set up switch but I did add nose weight the weather and my schedule haven't lined up for me to fly but will let you know
Well, it flies the same but with a decent transmitter the stick control is so much better. You can then use rates and expo, features not on the "toy" Tx! Also I guess it will have greater range.
Original versions? - No! New v2 versions with the clear canopies and S-bus and DSM sockets on the flight boards? - Yes! Plug in a Flysky A8S satellite receiver. You will also need to set it to output S-bus on the i-Bus/S-bus pin as per the instructions supplied with the A8S.
I did not flash via the USB port on the irx4 lite so I don't know. Much easier just to copy the firmware to the SD card and flash from the radio : th-cam.com/video/9Fw-k2MiaPA/w-d-xo.html Thanks for watching, have a great day!
Ok thanks I thought you needed to unlock the boutloader with this system too. Possibly can you also go back and install an older version of a firmware inside the module?
@@dario_3D As far as I can remember the bootloader issue was only with very early versions of the IrangeX : th-cam.com/video/e4ReeQZznT4/w-d-xo.html I guess you can flash older versions to it but do not see why you would want to do that!
@@1nformaticaJust because in the latest version of the multi module three different .bin files are shown and I don’t understand which one should be installed the version I’m referring to is 1.3.3.4 I think
@@dario_3D Make sure you are on this page : downloads.multi-module.org/ Once you fill in all the fields especially your channel order (AETR) you should only have one bin file.
That zoro transmitter is really cool, great design as well. The plane flew well looks great in the air well done captain 👏
Hey thanks! It's only a toy but still lots of FUN. Under 250g so the fun police can't touch you!! Have a great day!
A cunning plan there, Baldrick! We've added a couple of Jumper T-lite v2 radios lately - a 4-in-1 and the other in ELRS with that Lite module on the back. On 1.3.3.20 now.
We'll probably wait for the next stable release before bothering to update since our FX9603 and QIDI 550 planes that run this protocol also have satellite ports and there are a couple of more interesting protocols currently in development by Pascal et al. eg Pinecone SG F22
I'm still hoping to add the QIDI flight board to 1 of our little foam chuckies when Quack visits allow.
Awesome flying, my friend! Pretty cool airplane! 😃
Thanks for the tutorial! And excellent radio choice!
Stay safe there with your family! 🖖😊
Obrigardo Mario! It's only a toy but a lot of FUN, which is what it is all about for me!
Fantastic tutorial there,and a very neat model!!! Thank you for a fantastic&helpful video..happy flying
You're welcome! Have a great day!!
Good flying. Love those small planes
Me too! Thanks for watching, have a great day!
Great video, its funny with these, I've seen some reviews of them flying quite fast yet others seem to be struggling like they're being held back and don't sound as balanced possibly, some say they have plenty of power whilst others say they are underpowered, I happen to have one that moves along with well. I also ran mine in for 20 minutes before using it. There's a guy who's already brushless converted one of these, looking forward to seeing the final outcome. Great video on binding to another transmitter 😁👍🏼
You're welcome! I feel mine is a little tail heavy. There's are video where a guy puts two screws under the rubber nose, I may try that although a heavier battery would be the way to go!! Have a great day!!
I have seen that video as well. I'm currently using the 2s 380 mah. If a larger millamp battery will fit in the compartment it maybe the way to go kill two birds with one stone including more flight time and a bit more thrust. Each motor is advertised with 50 grams thrust per motor at 100 gram fly weight if its balanced correctly and decent battery should be sufficiently powerful. Looking forward to trying a larger battery also 😁
Excellent video, I have this plane and the Boxer so this will be super helpful. Thanks Mate!
You're welcome! Have a great day!!
Thanx for the vid I haven't thought ch 6 for gyro but flew on included controller so have it bound to TX16S need to set up switch but I did add nose weight the weather and my schedule haven't lined up for me to fly but will let you know
Hey thanks! Will add a little nose weight to try, maybe it won't need so much nose pointing down!! Have a great day!
Have you got a video on how to bind a tx16s mkii to this plane ?
The procedure is the same as I show for the Zorro only with pretty colour screen! th-cam.com/video/9Fw-k2MiaPA/w-d-xo.html
Does it fly better.?
Well, it flies the same but with a decent transmitter the stick control is so much better. You can then use rates and expo, features not on the "toy" Tx! Also I guess it will have greater range.
Do you know any way to bind eachine warbird and flysky transmitter?
Original versions? - No!
New v2 versions with the clear canopies and S-bus and DSM sockets on the flight boards? - Yes! Plug in a Flysky A8S satellite receiver. You will also need to set it to output S-bus on the i-Bus/S-bus pin as per the instructions supplied with the A8S.
@@theoztreecrasher2647 Thanks cobber! You got there ahead of me!!
@@theoztreecrasher2647 oh. Mine is old version ı think. I bought it in 2021.
Thank you.
@@theoztreecrasher2647 I just noticed that it says v2.0 on the card and there is a wifi port.
@@AdilErtKaya Wifi port is no use to you. You need the newest version of the flight board with the S-bus and DSM ports on it.
Can I flash the irx4 lite module without unlocking the boutloader?
I did not flash via the USB port on the irx4 lite so I don't know. Much easier just to copy the firmware to the SD card and flash from the radio : th-cam.com/video/9Fw-k2MiaPA/w-d-xo.html Thanks for watching, have a great day!
Ok thanks I thought you needed to unlock the boutloader with this system too. Possibly can you also go back and install an older version of a firmware inside the module?
@@dario_3D As far as I can remember the bootloader issue was only with very early versions of the IrangeX : th-cam.com/video/e4ReeQZznT4/w-d-xo.html I guess you can flash older versions to it but do not see why you would want to do that!
@@1nformaticaJust because in the latest version of the multi module three different .bin files are shown and I don’t understand which one should be installed the version I’m referring to is 1.3.3.4 I think
@@dario_3D Make sure you are on this page : downloads.multi-module.org/ Once you fill in all the fields especially your channel order (AETR) you should only have one bin file.
Excelente, fantástico vuelo. Gracias
¡Gracias a ti! Saludos desde Andalucía!